win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Incinerate Pearl  (Read 12377 times)

Ballreviews

  • Administrator
  • Hero Member
  • *****
  • Posts: 543
Incinerate Pearl
« on: September 17, 2013, 12:33:18 PM »
Ball NPS Score: 100.00
AMF Incinerate Pearl Ball Specs:
- Color: Black/Orange All colors do vary somewhat from the picture shown.
- Reaction: Hook
- Coverstock: F73 Pearl
- Core Type: Symmetric
- Factory Finish: Polished
- Radius of Gyration (RG): 2.54**
- Differential (Diff): .050**
- ** RG and Diff are based off of 15 lb. balls
- Hook Potential: Strong
- Length: Long
- Recommended Lane Condition: Heavy Oil
Logged

 

Travis92103

  • Jr. Member
  • **
  • Posts: 9
A Must Have on ANY Condition
« Reply #1 on: October 19, 2013, 12:41:21 PM »
The adjustment to the strength of the F90 coverstock on the original Incinerate to an F73 on The Incinerate Pearl made this ball a go to ball for me on ANY condition! I laid this ball out with 5 ½ x 3 ½ x 3 1/8. The look of the layout is Pin above the bridge on the midline and CG is kicked out with a small weight hole on my VAL. This ball is still strong even losing a little of the cover! The pearl cover allows the ball to get down the lane while storing all its energy to the end of the pattern with a huge motion on the backend! You will never have to worry about the corner pins with ball because it clears pin decks every time! You will not be disappointed with this ball and the color scheme is eye grabbing going down the lane!
Logged

Edrock1969

  • Jr. Member
  • **
  • Posts: 51
Re: Incinerate Pearl
« Reply #2 on: October 21, 2013, 09:50:01 AM »
LANE CONDITION

Length:41ft

Volume:29-31

Type (THS, Sport Pattern etc):thsI layed this ball out with a 5 1/2 inch pin above the fingers, with no hole. What I really liked about this ball was its ability to read some of the heavy oil deep inside on the house pattern and not skid too much and still stay very angular on the backend. AMF has done a great job on this combination of core to coverstock on this one, for its ability to do that on these house patterns. You can start off in early league and be a little more behind the ball to start off and by the end of the night you can migrate left and get around the ball more and continue striking, you wont have to mess around and switch balls as much if you start off with this one in your hand. Great job AMF!


COMMENTS

Likes:

Dislikes:


PICTURES AND/OR VIDEOS
Logged

heavytop4

  • Jr. Member
  • **
  • Posts: 71
Re: Incinerate Pearl
« Reply #3 on: October 21, 2013, 03:37:24 PM »
AMF Incinerate Pearl, wow, wow and WOW!  Drilled it 5 x 4 CG swung about  1 1/2" right of center line, 1" weight hole.  The ball is an angular monster!  BIG flip motion on backend.  Seems like on today's THS strong symmetric balls are so aggressive and this one is all that and some!  Really opens up the lane.  Oil doesn't seem to be an issue for this ball, either up front or carrydown didn't hurt the performance.  As the pattern broke and I moved left the ball keeps hooking.  Good carry, really throws pins around.  It's a shiny ball looking for oil, a rarity.  Great compliment to the dull, chugging solid Incinerate.  Way to AMF!!
Logged

Sling900

  • Jr. Member
  • **
  • Posts: 17
Re: Incinerate Pearl
« Reply #4 on: October 21, 2013, 07:29:10 PM »


Very clean through the fronts with big backend.  Great ball for moving left with the backend to turn the corner.  Low tilt players will see a strong move down lane.  Higher tilt players will want to break the cover with a t or a pad.  The Pearl Incinerate keeps the pins low, which you don't see with big backend.  Great carry!!!

Logged

duanewv

  • Jr. Member
  • **
  • Posts: 41
Re: Incinerate Pearl
« Reply #5 on: October 22, 2013, 01:28:16 PM »
LANE CONDITION

Length:42ft

Volume:medium
Type (THS, Sport Pattern etc):
I drilled my Incinerate Pearl pin up above bridge. Wow what a great compilment to the Incinerate solid. This ball easily clears the fronts with a huge backend. This ball allows me to move left and open up the lane. The cover stock might be weaker than the original Incinerate solid but it just makes up for it on the backend. I have used it on several diffent patterns and I have not found one that i couldn`t use it on. Even on oil I can move right and get to the pocket. Very versitle ball. It is a must have.
COMMENTS

Likes:

Dislikes:


PICTURES AND/OR VIDEOS
Logged

mbigum

  • Jr. Member
  • **
  • Posts: 43
Re: Incinerate Pearl
« Reply #6 on: October 24, 2013, 09:21:21 PM »
The new AMF Incinerate Pearl what a versatile ball, the coverstock has been detuned from the F90 on the original to F73 and what a difference, this a go to ball that works on ANY condition. I laid this ball out with 5 ½ x 3 ½ x 1 ¼, my PAP is 5 3/8 right and ¾ down. This ball is still strong even losing a little of the cover! The pearl cover allows the ball to get down the lane while storing all its energy to the end of the pattern with a huge motion on the backend! This is a great addition to any ones arsenal and it also has great eye appeal with its orange and black colors!!
Logged

DJ840

  • Jr. Member
  • **
  • Posts: 22
Re: Incinerate Pearl
« Reply #7 on: October 26, 2013, 12:20:06 PM »
If there was ever a perfect pearl ball to compliment the strongest ball on the market...WELCOME TO THE INCINERATE PEARL. This baby has a perfect midlane roll, and is nothing but beast mode on the back end. Not to mention, the black and orange swirl puts all eyes on the ball. The F73 pearl cover creates the perfect combination of power and length. Drilled mine 12/6 (pin middle above fingers, CG middle below). Probably will get another one, and add some surface for a second weapon on the breakdown. Get the original Incinerate also to cover all ground in the world of ball reaction! Check out my videos of 900 Global/AMF Products on youtube, username "conventionalspinner"..
Logged

DanScig

  • Jr. Member
  • **
  • Posts: 38
Re: Incinerate Pearl
« Reply #8 on: October 29, 2013, 01:40:37 PM »
Drilled 65 x 5 1/4 x 40



The New AMF Incinerate Pearl is a true Skid/Flip pearl.  This ball clears the heads and doesn't stop there as it wastes very little in the mids and then delivers on the back end with a sharp angular move.   This ball does need a little oil on the lanes as I have found it will grab and go on the really dry boards but that is not a really a problem on the THS. 



Color scheme on this ball is a very sharp mix of Orange/Black pearl and it makes it easy to read the move on the back end.  Just make sure you give the ball some room and have fun watching it slap out the 10 time and time again.



Looking to try an AMF ball give the Incinerate Pearl a look and you won't be disappointed.


Likes:

Dislikes:


PICTURES AND/OR VIDEOS
Logged

tdub36tjt

  • Hero Member
  • *****
  • Posts: 1542
Re: Incinerate Pearl
« Reply #9 on: December 21, 2013, 12:45:51 PM »
DRILL PATTERN

Dual Angle Layout: 55 x 4.75 x 25

X Hole (if there is one): None


BOWLER STYLE

Rev Rate: 375

Ball Speed: 18.5

PAP/Track: 4 5/8" over 5/8" up

Tilt: 12

Rotation: 45-60

SURFACE PREP

Grit: OOB and sanded

Type: (Matte, Polish, Sanded): Polished


LANE CONDITION

Length: 38-42

Volume: medium-medium hevy

Type (THS, Sport Pattern etc): THS and Modified THS


BALL REACTION

Length: 8.5

Back End: 8.5

Overall Hook: 8.5

Midlane Read: 8



COMMENTS

About the Incinerate Pearl: The Incinerate Pearl is really good on medium conditions OOB. It clears the heads real well and has a good midland read with a strong but controlled backend reaction. On the conditions I have been seeing it was a great first game ball but after they began to break down I was stuck with an over/under type reaction. So I decided to add a little surface and I hit it with a 2000 pad. This was exactly what I was looking for. It turned it into a oil handling ball that would allow me to get deep on medium conditions that read the lane much better without the over/under reaction. I think this probably should have been the OOB surface as this ball fits a role much better in the line-up now being a very strong symmetrical pearl. This ball will work best for rev dominant players OOB looking to get deep or speed dominant looking for a stronger backend type reaction. With the surface adjustment this ball will fit the needs of a tweener that is looking to either handle oil or get a little deeper and not have a ball that goes sideways but isn't real rolly either.


PICTURES AND/OR VIDEOS
Logged

iamone78

  • Hero Member
  • *****
  • Posts: 614
Re: Incinerate Pearl
« Reply #10 on: January 04, 2014, 05:53:49 PM »
BALL SPECS

Pin Length: 2.5" - 3"

Starting Top Weight: 2-1/2oz

Ball Weight: 15.2


DRILL PATTERN

Pin to PAP: 5"

CG to PAP: 4-1/8"

Dual Angle Layout: 60* x 5" 40*

X Hole (if there is one): None


BOWLER STYLE

Ball Speed: 15.5 - 16

PAP/Track: 5-3/8" (right), 11/16" (up)


SURFACE PREP

Grit: OOB

Type: (Matte, Polish, Sanded): Polished


LANE CONDITION

Length: 39' - 46'

Volume: Medium, Medium-Heavy, Heavy

Type (THS, Sport Pattern etc): THS, Modified House, WTBA London, PBA Viper


COMMENTS

I'm not a huge fan of using Pearls starting out on a THS, but this ball is easily a first ball out of the bag for any fresh THS and it looks pretty too. Not having thrown any early days AMF balls, I was interested to see how this retro core would do with an updated cover. With the F73 cover I wanted to ensure this ball had enough length, but still had a controlled, predictable ball motion. Boy did this ball deliver with both length and predictability. The Incinerate Pearl revs up nicely mid-lane and delivers a predictable, strong arch motion on the backend. I don't see this ball as being over/under or jumpy off the dry. The Black Eagle Pearl is more characteristic of a skid/snap ball motion. Also, don't be afraid to use this on some oil. On the WTBA London shot, after the shot opened up, I could easily move deeper and still maintain carry. Yet another solid release from AMF!


PICTURES AND/OR VIDEOS
Logged
H. S.
#900Global #StrikingWorldwide #GoGlobal
#StormNation
#SquadRG
Pages: [1]
« previous next »