win a ball from Bowling.com

Author Topic: ball upgrade suggestions  (Read 1548 times)

sriddle

  • Jr. Member
  • **
  • Posts: 6
ball upgrade suggestions
« on: September 12, 2007, 08:58:08 AM »
so i just finished my first league this summer and i'm looking to move up to a heavier ball.  i'm currently using a 13lb ebonite whirlwind cause that's all i could handle with my poor technique.  when i first started if i scored around 120 i'd be happy.  i ended the league with an overall average of 159.  with 5 500 series and 3 games over 200, i'm definitely excited about the winter league.

the bad news, i bowl with only 2 fingers.  it's something that i've done since jr high, and i'm slowly working my way out of it.  but it's what i'm consistent with and probably don't want to completely switch over until next summer.  i'm currently correcting my technique one step at a time.  first was paying attention to where i was starting my approach, then it was actually walking straight, using the arrows, and well you get the point.

my current ball is drilled for the fingertip setup if i were to throw conventionally.  i don't know the specifics on the rest of how it was drilled cause i just let the pro shop guy do what he does.

i stand with my right foot on the dot furthest to the left, and aim between the first arrow to the right of the middle, and the one to the right of that.  my ball travels pretty much straight down that path and breaks at the end for the pocket.  when i leave pins it's usually the 10 pin or both the 10 pin and the 9 pin.  to pick up the 10 pin i have switch out to my friend's maxim since my ball hooks away before it gets there.

when i started the league i was throwing the ball at about 15.5 mph.  after midway through the league my ball wasn't breaking in time for the pocket so i had to slow it down to about 13.5 mph.

sorry about the essay, but i figure being detailed would help with the suggestions.

Edited on 9/12/2007 5:01 PM

 

  • Guest
Re: ball upgrade suggestions
« Reply #1 on: September 12, 2007, 05:50:59 PM »
The main problem I see with bowlers who don't use the thumb is that it's very difficult to repeat. One other possible problem is keeping the ball under control.
So I would suggest a ball with a duller surface that's drilled with a strong, or early rolling layout.  Anything else would be extremely erratic at the breakpoint.  One ball that I like for control is the Brunswick Wizard.  Great ball at a great price.  Good luck.


--------------------

Lane Carter, Strike Zone Pro Shops - Salt Lake City, Utah

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7606
Re: ball upgrade suggestions
« Reply #2 on: September 13, 2007, 03:29:05 AM »
Second that - you might need a "simple" ball like the Whirlwind that is easy to control, and a non-polihsed solid reactive or a light load particle would fit the bill, with a rolly layout or even a pin-axis drilling for maximum forward roll, control and a smooth arc.

The Wizard is a very good choice, it also has a higher RG that will help you with your not-so-high speed to retain energy for the pins. Another ball to consider would IMHO be the upcoming Avalanche Solid, a Clash from Ebonite or a Thunderstruck Solid (maybe without the OOB polish), Jolt Solid or Jolt Particle (with a higher grit surface) from Storm. They all should fit as stronger alternatives above your Whirlwind.
--------------------
DizzyFugu - Reporting from Germany

Confused by bowling?
Check out BR.com's vault of wisdom: the unofficial FAQ section
DizzyFugu ~ Reporting from Germany