win a ball from Bowling.com

Author Topic: Cover and core  (Read 5561 times)

Lkdelta2

  • Jr. Member
  • **
  • Posts: 6
Cover and core
« on: March 01, 2014, 11:30:33 AM »
On another site that is now closing down, I asked....
What is RG...and differential....?

The current moderator at the time took the time to post....
For those that might know him...Thanks BubbaRay

RG-
RG means Radius Of Gyration. The RG of a ball tells you how soon the core is designed to roll. The lower the RG, the sooner the ball is designed to roll. The lowest allowed by the USBC is 2.43 the highest is RG 2.80.

The RG Differential (also called just DIFFERENTIAL) -
This indicates the difference between the low RG and the high RG. The Differential indicates the potential for track flare which can be translated into hook potential. The higher the differential, the more hook potential the core possesses. The RG differential indicates the difference between the low RG and the high RG. The maximum differential allowed by the USBC is 0.060. Don�t get this confused with intermediate differential because that is different. This is used in asymmetrical balls to measure the spin time of the bowling ball before drilling.


this is what RG Differential and RG mean. But, the biggest influence in ball motion is the surface of the ball and the force and direction of the bowler�s release. In addition, the condition of the lane must also be taken into consideration...

Now here is a pretty good rule.

A lower RG ball with a low differential will produce an earlier rolling ball with a small arcing motion.
A lower RG ball with a high differential will produce an earlier rolling ball with a larger/stronger arcing motion.
A higher RG ball with a low differential will produce a later rolling ball with an angular backend motion.
A higher RG ball with a high differential will produce a later rolling ball with a strong, somewhat angular backend motion.

On differential:
The lower the differential the closer together the track flare. The higher the differential the further apart the track flare. The cover stock friction on the lane allows this to come together. Coverstock adjustment is needed to adjust to the conditions you are bowling on. Well I hope this helps and does not confuse you too much
13/14.. figuring it out.. 287/791
current '13-14 avg: 227.4

 

MI 2 AZ

  • Hero Member
  • *****
  • Posts: 8156
Re: Cover and core
« Reply #1 on: March 01, 2014, 01:56:54 PM »
See the FAQ.

Oh, and which site is closing down?
_________________________________________
Six decades of league bowling and still learning.

ABC/USBC Lifetime Member since Aug 1995.

Aloarjr810

  • Hero Member
  • *****
  • Posts: 2149
  • Alley Katz Strike!
Re: Cover and core
« Reply #2 on: March 01, 2014, 02:06:35 PM »
See the FAQ.

Oh, and which site is closing down?


Looks like the hammer board is closing
http://forums.hammerbowling.com/showthread.php?t=14447
« Last Edit: March 01, 2014, 02:08:12 PM by Aloarjr810 »
Aloarjr810
----------
Click For My Grip

J_Mac

  • Hero Member
  • *****
  • Posts: 6778
Re: Cover and core
« Reply #3 on: March 01, 2014, 03:30:34 PM »
Keep in mind that numbers change once holes are drilled in the ball, so what started out as a low RG low differential ball might turn into something else...

The RG of the ball doesn't matter that much... the RG of the PAP of the drilled ball matters.

bowlersam

  • Jr. Member
  • **
  • Posts: 64
Re: Cover and core
« Reply #4 on: January 18, 2016, 03:35:47 PM »
The RG of the ball doesn't matter that much... the RG of the PAP of the drilled ball matters.

It was getting better until this post I quoted. I want to learn and so far I have. But it is very hard, at least for a new bowler like me.

Kindly elaborate so I and others can gain some knowledge.

Thanks

JustRico

  • Hero Member
  • *****
  • Posts: 2652
Re: Cover and core
« Reply #5 on: January 18, 2016, 03:54:51 PM »
Pin to pap creates varying RG values...a pin farther from pap creates a higher RG reaction and closer to the pap a lower RG reaction
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

ccrider

  • Hero Member
  • *****
  • Posts: 2230
Re: Cover and core
« Reply #6 on: January 18, 2016, 04:41:02 PM »
Pin to pap creates varying RG values...a pin farther from pap creates a higher RG reaction and closer to the pap a lower RG reaction

Still helps to know the ball's potential doesn't it?

JustRico

  • Hero Member
  • *****
  • Posts: 2652
Re: Cover and core
« Reply #7 on: January 18, 2016, 04:45:59 PM »
It's all based upon core strength or diff
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com