win a ball from Bowling.com

Author Topic: Long time bowler making a change  (Read 1461 times)

Robert

  • Jr. Member
  • **
  • Posts: 41
Long time bowler making a change
« on: October 31, 2004, 12:38:08 AM »
I'm the tipical down and in 2nd arrow player.  I've done this for years until just recently.  Earlier this year, I purchased two Ebonite TPC PLayers and had them both drilled for fingertip.  They both have a nice arc to the pocket.  I play both of these on or around the third arrow.

My usual starting point is on the center dot or one board left with my left foot.  I drift a little left when I finish my slide.  My main ball is an Ebonite Matrix Conquest drilled fingertip.  It no longers skid-snaps.  It will just roll.  Maybe a different sanding pattern and grit change is needed.  I'll have to experiment with it on my spinner.

Now with the TPC PLayers, I stand about 10 boards further left and play on or around the third arrow.  THe players have a nice arc and a hard turn toward the pocket.   I usually don't like to use the TPC players in my house because of too many mechanical problems.  Too many balls are being damaged.  I usually play them in another house.  Should I continue to use the Conquest or take a chance with the Players in my house?

Cheers

Robert

 

smash9

  • Sr. Member
  • ****
  • Posts: 396
Re: Long time bowler making a change
« Reply #1 on: October 31, 2004, 09:30:14 AM »
Tough question to answer. It kind of depends on the bowler and how he reacts to "damage" to his  ball...  For example, a guy I bowl with had a little "normal" nick from equipment the first night he was using the ball --- he made the house replace the whole ball....Me, as long as the nick wasn't in my track I'd just keep using it (I'd tell the house owner/manager just to go on record, however, and then ask for a reasonable adjustment if the problem continued).  Don't know how you'd react if that happened, but from what you describe it sounds like you're asking for trouble -- "too many balls are being damaged"
Based on that I'd say keep using your Conquest --- it's a shame you can't take your "babies" there and use them but the cost of bowling balls being what they are who wants to risk it????   Any chance of picking up a used TPC somewhere???  You'd have less of an investment in case it got damaged.

P.S. That's a sad state of affairs for that bowling alley -- that's got to effect their lineage
--------------------
So you like this guy????
Yeah, he treats me sweet -- I met him at a bowling alley.         (Matchstick Men)

Robert

  • Jr. Member
  • **
  • Posts: 41
Re: Long time bowler making a change
« Reply #2 on: October 31, 2004, 02:32:27 PM »
Well I'm using the Conquest because it has alot of surface damage to it.  It has been sanded twice in the last year and a half.  I have it now at 1200 grit w/ factory finish polish.  It just no longer skids/snap.  Could be very dry lane conditions however.

I threw one of my players last evening at my house and it didn't show any damage.  I got lucky.  A friend of mine had an old AMF and it got caught under a wheel (ball return)??  and made a 1/2" wide X 1/4" deep gash 180 degrees around the ball.  Very scary...  Another friend at the police department got a ball back with a 2" chunk taken out at the finger holes....brand new ball....

I guess it could happen at any bowling alley, but more frequently at mine..

Cheers

Robert