win a ball from Bowling.com

Author Topic: Mastermind Einstein  (Read 21855 times)

BallReviews-scodaddy21

  • Administrator
  • Hero Member
  • *****
  • Posts: 974
Mastermind Einstein
« on: July 07, 2015, 09:39:51 AM »
Ball NPS Score: 100.00
bowling.com has the largest selection of bowling balls
Click here to shop.

Description: Outsmart the competition with the Brunswick Mastermind Einstein. This high performance bowling ball offers easy length with mid lane traction and outstanding movement on the backend when used on medium to oily lanes.  This reaction is achieved by combining Modified Mastermind Low RG core with the aggressive Relativity hybrid coverstock and finishing it with a 4000 grit Siaair Micro Pad.

Brunswick Mastermind Scholar Ball Specs:

- Color: Red, Silver, & Blue   All colors do vary somewhat from the picture shown.
- Core: Modified Mastermind Low RG (14#-16#)
- Coverstock: Relativity Hybrid
- Factory Finish: 500, 2000, 4000 Siaair Micro Pad
- Reaction: Easy length, mid lane traction, aggressive backend
- Radius of Gyration (RG): 2.538**
- Differential (Diff): 0.048**
- ** RG and Diff are based off of 15 lb. balls
- Hook Potential: 230 (scale 10-250)
- Length: 100 (scale 25-235)
- Breakpoint Shape: Angular
- Recommended Lane Condition: Medium-Heavy Oil
- A few tiny pit holes in the cover stock of the ball are normal

 

bowler838

  • Full Member
  • ***
  • Posts: 170
Re: Mastermind Einstein
« Reply #1 on: July 07, 2015, 09:52:53 AM »
Need a ball for heavier conditions?  Look no further than the Mastermind Einstein.  This hybrid will easily get through the fronts with a strong mid lane reaction and an even stronger motion on the backend.  It'll give you a great compliment to a Mastermind Scholar.  Its a little sooner than the Scholar but also stronger.  If you ever have a problem with carry down this will be the ball to throw.  I was able to open my angles up and just keep moving left and not once did it not make the corner.  If you are in the market for a strong hybrid, look no further than the Mastermind Einstein.  Your going to want this ball in you bag

frike300

  • Jr. Member
  • **
  • Posts: 53
Re: Mastermind Einstein
« Reply #2 on: July 07, 2015, 01:44:57 PM »
I drilled the Einstein with the layout I use to start with all of my asymmetrical balls which is a 65X5.5X40 layout which puts the pin just over my middle finger and the mass bias just to the right of my thumb with the extra hole kind of being between P2 & P3.  With the out of the box surface I find this ball to fit just over my Mastermind Intellect and under my regular Mastermind.  I had issues with my regular Mastermind on heavier oil shot where I still want to open up my angles with the ball using too much energy getting right and not having enough back-end to carry.  I like where the Einstein fits in, as I can open up my angles with it and still see the strong down lane ball motion that I like.  I have the Einstein about 5&3 stronger than my Intellect, and will fit in the arsenal nicely when the Intellect is not quite enough.

Mike Freundel
Brunswick Regional Staff
This post is the view of the writer and not Brunswick Bowling

Warren300

  • Hero Member
  • *****
  • Posts: 1926
Re: Mastermind Einstein
« Reply #3 on: July 07, 2015, 07:06:36 PM »
I drilled this ball 60x5x70 which is a one of my favorite layouts. This ball was quite the surprise when it hit the lanes. Those of you who love that Mastermind signature reaction will love how this ball seems to be a great combo of all of them rolled into one. I was able to play multiple angles without losing carry or having it read to early. This ball was clean thru the front and read well down lane with endless recovery. If you loved the back end movement of the Scholar you'll love the Einstein and it's ability to provide similar angle without being as sensitive to oil.

Warren Heady
Brunswick Regional Staffer
#TeamBrunswick
#Bowl4life


The opinions expressed are solely those of the writer and not of Brunswick Corporation.

Professorr

  • Newbie
  • *
  • Posts: 2
Re: Mastermind Einstein
« Reply #4 on: July 08, 2015, 06:55:27 AM »
I drilled my Einstein 60 x 5 x 40, this ball definitely has that " WOW" factor as you see it go down the lane. In it's OOB finish this aggressive hybrid cover easily gets through the front of the lane and with it's low Rg core it boost angularity for a strong down lane motion on those medium-heavy oil conditions.

Demetrius Evans
Brunswick Regional Staff
#TeamBrunswick

kingofsqueeze

  • Jr. Member
  • **
  • Posts: 5
Re: Mastermind Einstein
« Reply #5 on: July 09, 2015, 04:27:28 PM »
My Einstein had the pin an inch above and inside the of middle finger with the MB about half an inch outside of my thumb. This is my favorite layout. That being said, this makes my Einstein have the most angular flip of any Mastermind I have. It hits harder than all of my Masterminds and is a great addition to bag. It has a little more midlane than the Scholar and Genius and not as much early hook as the original Mastermind. If I start out using the Genius I'll change to the Einstein if I lose backend and the same with the Mastermind.

If you're looking for that go to ball for fresh or a shot that has carried down, the Mastermind Einstein is the ball for you.

David Tullos
Brunswick Regional Staff

The opinions expressed are solely those of the writer and not of Brunswick Corporation!

BigBPride

  • Full Member
  • ***
  • Posts: 104
Re: Mastermind Einstein
« Reply #6 on: July 11, 2015, 09:52:46 AM »
BALL SPECS

Ball Weight: 15 lbs


DRILL PATTERN

Dual Angle: 55 x 4 1/2" x 55

X Hole (if there is one): Yes


BOWLER STYLE

Rev Rate: Medium , between 250-275 rpm

Ball Speed: 17-18 mph

PAP/Track: 5 1/2" over and 1/2" down


SURFACE PREP

Grit: Box Finish

Type: (Matte, Polish, Sanded): Sanded


COMMENTS

The Mastermind Einstein is a very SMART AND STRONG piece of equipment.  The Mastermind Einstein is very clean up front for a strong ball and has a strong continuation motion in the backend.  I drilled mine to roll stronger than my Scholar with more angular continuation.  The Mastermind Einstein is a great piece to add along with the other masterminds.  The Mastermind Einstein is a great ball that you will want to have.


Charles Withers II
Brunswick Advisory Staff

The opinions expressed are solely those of the writer and not of Brunswick Corporation.

UpstateProShopChris

  • Sr. Member
  • ****
  • Posts: 372
Re: Mastermind Einstein
« Reply #7 on: July 12, 2015, 10:43:44 PM »
BALL SPECS


Pin Length: 3.5"


Starting Top Weight: 2.7 oz


Ball Weight: 15 lbs 3 oz



DRILL PATTERN


Ball: 60 x 4.5 x 35


X Hole (if there is one): No Hole



BOWLER STYLE


Rev Rate: 375 rpms


Ball Speed:17.5 mph



PAP/Track: 4 3/4 over 3/4 up



SURFACE PREP


Grit: Box Finish


Type: (Matte, Polish, Sanded): Refreshed box 500, 2000, 4000 Siaair



LANE CONDITIONS


Lengths of patterns: 41 foot house shot and 47 foot Scorpion



Volumes:  moderate



Type: house and sport




BALL REACTION


Length: Clean through the heads and strong read in the midlane with good backend recovery



Back End: Strong arc


Overall Hook: Strong but versatile


Midlane Read: Strong


Breakpoint Shape: Strong arc



COMMENTS


Likes: Overall hook and ability to handle transition



Dislikes: none

The Mastermind Einstein has the combination of all the great traits of the Mastermind Series combined into one.  It has a strong read of the mid lane and plenty of hook like the original Mastermind.  The Einstein has the easy length through the front like the Genius.  It has the continuation down lane like the Intellect.  The Mastermind Einstein also has the down lane hook like the Mastermind Scholar.  It also has an added feature from the new coverstock technology.  This ball allows me to stay in the same area as the lane transitions longer than other equipment.  I seem to be able to get an extra few frames per lane before I have to move in and open my angles more.  This is a trait you typically see in a urethane or weaker reactive resin ball.  It doesn't mean I can stand in the same spot all night but being able to stand in the same spot a few frames longer could be the key to throwing a few more strikes per game.  I can hook the lane with this ball and open my angles or I can close my angles while playing up the boards.  If you have the ability to change the Einstein will change with you.  It hooks a few boards more than the Mastermind Scholar and starts its move a few feet sooner.  With 2000 Siaair on it the Mastermind Scholar proved to be too much ball for the 47 foot Scorpion pattern and I had to go back to the box finish.  With 1000 Siaair I could see it being a go to ball in oil.  It seems to work best on the house condition at the 4000 box finish and if I was going to use it as my primary ball I would probably put some Royal Compound on it.  Overall, the Mastermind Einstein is powerful, versatile, and a lot of fun to throw!  If you are looking for a strong ball that handles lane transition check one out today.
Chris Garrett
Upstate Pro Shop
Greenville, SC  864-248-4737
Upstateproshop@charter.net

Brunswick Regional Staff
Vise Regional Staff

bjviator

  • Newbie
  • *
  • Posts: 1
Re: Mastermind Einstein
« Reply #8 on: July 15, 2015, 01:11:16 PM »
LANE CONDITION

BALL SPECS

Ball Weight: 15 lbs
Pin Distance: 3-4
Top Weight: 2.75

DRILL PATTERN

Dual Angle: 59 X 5 3/8 X 35   

X Hole (if there is one): No


BOWLER STYLE

Rev Rate: Medium , between 325-350 rpm

Ball Speed: 17-18 mph

PAP/Track: 5 5/8" over and 3/4" up


SURFACE PREP

Grit: Box Finish

Type: (Matte, Polish, Sanded): Matte


COMMENTS

Likes:
Love Love Love this ball.  This ball reminds me of the Genius but with more backend motion.  First set with this ball in league, 245 - 274 - 278 - 797 and then a week and a half later, bowling in a tournament, I shot 238, 258, 299 - 795.  So, close to shooting a huge number with this ball.  The Einstein is about 3 or 4 boards stronger downlane than the Genius was. 

Dislikes:
Nothing at all.


PICTURES AND/OR VIDEOS
Bryan Viator
PBA Member
Brunswick Regional Staff Member
Turbo Regional Staff Member

JayhawkBowling

  • Jr. Member
  • **
  • Posts: 80
Re: Mastermind Einstein
« Reply #9 on: July 16, 2015, 09:12:45 AM »
Drilled a Einstein with 60 x 4.75 x 50 to be a compliment to my Scholar and Intellect.  The Intellect has been one of my favorite balls for its ability to read the lane and never missing the break point.  The Einstein being a Hybrid and slightly higher RG allow this ball to push a little further and be more angular than my Intellect.  I would put it at 2-1 stronger than my Intellect and allows me to go around a pattern a little more than I could before.  It is a perfect ball when a Scholar is having trouble reading the lane.  I think the slightly higher RG in this ball and new cover stock material is going to make this ball great for opening your angles up and be a little more flippy down lane either on the fresh, or when you need to try to open up a pattern. 

BallReviews-Removed0385

  • Newbie
  • *
  • Posts: 0
Re: Mastermind Einstein
« Reply #10 on: July 16, 2015, 12:49:17 PM »
LANE CONDITION

Length: 40 ft.

Volume:  28 ml

Type (THS, Sport Pattern etc): THS

Layout:  4.5" from PAP and below the fingers, with x-hole next to thumb
COMMENTS

Likes:  The most versatile ball for me in the Mastermind series.  Fits between the first Mastermind and the Scholar.  I barely touched the surface with a 2000 pad to knock the gloss down and have loved the look so far.  Strong, but not too early; angular, but not as flippy as the Scholar for me.  What a great ball on the fresh, or when you want to open up the angles as the lanes transition.

Dislikes:  I do leave more 9 pins than ever, but I can live with that. 

Thanks for considering Brunswick.

PICTURES AND/OR VIDEOS

DFR

  • Newbie
  • *
  • Posts: 4
Re: Mastermind Einstein
« Reply #11 on: July 20, 2015, 11:05:16 PM »




World Wide Release: 7/7/2015

Drilling: 45 x 5.5 x 30

What I got from the Mastermind Einstein was exactly what I was looking for with this new release.  The motion I get from this ball reminds me so much of the original Mastermind.  The difference between the two is that you will see much more versatility from the Einstein due to it not needing as much oil.  The ball has a very clean reaction through the front part of the lane but still does not over react to the friction.  Very excited to throw this ball in the upcoming tournament season. GO GET YOURS TODAY!

Ryan Council
Lindenwood Lion 2005-2010
Brunswick Regional Staff
bowlwithbrunswick.com

BrunsWolf

  • Hero Member
  • *****
  • Posts: 588
Re: Mastermind Einstein
« Reply #12 on: July 21, 2015, 08:53:48 PM »
Bowler Stats:
Speed: 18-19mph
Rev Rate: 400-450rpm
Axis Rotation: Medium
Axis Tilt: Low
Ball Layout: 45 by 5.25” by 45 with P3 hole
The Einstein is the bigger, better brother to the Mastermind Intellect. The Einstein will produce similar overall hook compared to the Intellect with the difference coming all in the backend. My Einstein still gives me more than enough midlane reaction but I’m very pleased with the extra backend strength. This allows me to open up my angles and not be so worried about leaving corner pins as I continue moving inside. I thought the Scholar was my favorite ball in the Mastermind line, but the Einstein is quickly catching up. It’s just a good, wholesome, versatile, big-boy asymmetric. Nothing terribly fancy but just gets the job done. I tend to pull this out of my bag first when I know I’ll be dealing with heavier volume and/or longer patterns. Whether you plan on facing heavier/longer house shots or sport patterns, the Einstein would be a great choice for a strong yet versatile asymmetric.
Jared Wolf
Jonesboro, AR
Brunswick Advisory Staff

The opinions expressed are solely those of the writer and not of Brunswick Corporation.

piper3595

  • Jr. Member
  • **
  • Posts: 31
Re: Mastermind Einstein
« Reply #13 on: July 22, 2015, 01:39:19 PM »
The Mastermind Einstein brings the best characteristics of the series into one package. The ball is very clean through the front part of the lane with really strong midlane traction and the most continuous backend motion of all of the balls. The ball finishes the furthest left off of the end of the lane for me compared to all of my other Mastermind balls. The carry this ball creates is, in my opinion the best of the series. If you’re looking for a ball for fresh patterns that goes through the pins extremely well this is your ball. Get to your local proshop and start outsmarting the competition today!

Greg
Greensburg, PA

learnmore

  • Jr. Member
  • **
  • Posts: 5
Re: Mastermind Einstein
« Reply #14 on: July 23, 2015, 03:36:35 PM »
LANE CONDITION

Length:40 ft

Volume:medium

Type (THS, Sport Pattern etc):ths


COMMENTS
This new mastermind may be the one that defines them all.  I am currently throwing it with the box finish, and I love it.  Its definatly not a dry lane ball, but it can handle anything from medium to wet in my hands.  If your looking for a good high end piece you should check it out.

Likes:smooth, easy to read, 

Dislikes: dry lanes


PICTURES AND/OR VIDEOS