win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Intense Inferno drilling suggestions  (Read 2605 times)

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Intense Inferno drilling suggestions
« on: March 27, 2005, 12:25:23 PM »
What would be a good drilling on an Intense Inferno for dry-light oil lanes? I know the ball is condition specific, but I want to give it a try. Just some suggestions would help.

It's about a 3" pin, 3 oz. top weight. Thanks!
--------------------
It seems one man's struggles solve another man's problems.....
Logged

 

4-6 Split

  • Jr. Member
  • **
  • Posts: 41
Re: Intense Inferno drilling suggestions
« Reply #1 on: March 27, 2005, 08:32:51 PM »
Pin Above Bridge. CG stacked or kicked out.
Logged

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Intense Inferno drilling suggestions
« Reply #2 on: March 27, 2005, 08:34:13 PM »
Your profile says you already have a Power Groove drilled for dry lanes with pin above the bridge. If that is working for you properly on light oil lanes, the Intense is likely to be too strong, even with a weak drilling. With a weak drilling, it might fit above the PG to cover medium-light to medium oiled lanes. The Intense is NOT condition specific; its higher RG core just helps it get length along with the basic nature of the Activator+ cover. The cover is also very strong at the breakpoint.
Logged
"None are so blind as those who will not see."

4-6 Split

  • Jr. Member
  • **
  • Posts: 41
Re: Intense Inferno drilling suggestions
« Reply #3 on: March 27, 2005, 08:36:47 PM »
Charlest hit it right on the nose.
Logged

agroves

  • Hero Member
  • *****
  • Posts: 4939
Re: Intense Inferno drilling suggestions
« Reply #4 on: March 27, 2005, 08:37:47 PM »
Charlest, he sold the PG and slayr.

My recommendation is:

Pin 5 3/4" from axis, cg in palm, sand to 2000 or 4000 grit, 18 cycles in the luster king, four additional coats of bwick high gloss, throw on some turtle wax....then you could use it on lighter oil...maybe.

andrew
--------------------
FUFU
Member of the Brunswick Nation!
Logged

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Intense Inferno drilling suggestions
« Reply #5 on: March 27, 2005, 10:43:00 PM »
Andrew,

Funny stuff, but not actually far off the mark.
I had to sand my Intense to 2000 grit and then re-polish with Brunswick's high gloss polish to get it to work for the first game+ on old wood lanes that start out medium-light. Still had to put it away before 3rd game. That ball was drilled 4" pin, next to ring finger, CG in grip center. Redrilled it pin at 5", pin over ring finger and restored it to out of the box finish. Better but still needed finer grit. Just resanded it to 1000 grit and re-polished. Still nowhere near a light oil ball!
Logged
"None are so blind as those who will not see."

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Re: Intense Inferno drilling suggestions
« Reply #6 on: March 28, 2005, 04:14:07 AM »
Yeah, my profile hasn't been update for quite sometime! lol! I know it will be a stretch to get this ball to do what I want, but I think I can make it work. What is the biggest difference between this ball and the Origianl Inferno?
--------------------
It seems one man's struggles solve another man's problems.....
Logged

agroves

  • Hero Member
  • *****
  • Posts: 4939
Re: Intense Inferno drilling suggestions
« Reply #7 on: March 28, 2005, 05:19:17 AM »
quote:
Yeah, my profile hasn't been update for quite sometime! lol! I know it will be a stretch to get this ball to do what I want, but I think I can make it work. What is the biggest difference between this ball and the Origianl Inferno?
--------------------
It seems one man's struggles solve another man's problems.....


The core is the big difference, IMO.  It is a higher rg core, which means it revs up later down the lane and has skid/snap characteristics.  The cover is Activator plus, which is slightly cleaner through the fronts and slightly stronger on the backend.  Honestly, I don't notice much of a difference between the two coverstocks.

andrew
--------------------
FUFU
Member of the Brunswick Nation!
Logged

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Re: Intense Inferno drilling suggestions
« Reply #8 on: March 30, 2005, 03:48:20 PM »
any more suggestions?
--------------------
It seems one man's struggles solve another man's problems.....
Logged

Bowlnrd

  • Full Member
  • ***
  • Posts: 131
Re: Intense Inferno drilling suggestions
« Reply #9 on: March 31, 2005, 12:59:05 PM »
I have mine drilled 1:30 thinking the ball would roll even but i never thought i could use it on so many different conditions. I Keep the cover un polised white scotch brite. when the lanes get burnt i dont try to swing the ball i try and square up and play around 5.Its not my first choice for dry lanes but it can work maybe even better with some polish.


Bowlnerd
Logged

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Re: Intense Inferno drilling suggestions
« Reply #10 on: April 03, 2005, 03:04:57 PM »
ttt one more time.
--------------------
It seems one man's struggles solve another man's problems.....
Logged
Pages: [1]
« previous next »