win a ball from Bowling.com
« previous next »
Pages: 1 [2] 3

Author Topic: Brunswick Benchmark Options?  (Read 12832 times)

todvan

  • Full Member
  • ***
  • Posts: 234
Brunswick Benchmark Options?
« on: February 16, 2014, 07:14:20 PM »
I am interested in looking at benchmark options from the Brunswick line of ball makers.  Looking for a strong arcing but controlled reaction on house and medium length sport conditions.  Thanks!
Logged
MOTIV Jackal LE .................40 x 4.5 x 40 p2.5
MOTIV Revolt Vengeance......45 x 4.0 x 50 p3
MOTIV Forza GT ..................50 x 4.0 x 70 p2.5
MOTIV Sigma Sting..............50 x 4.0 x 45 p3

 

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Brunswick Benchmark Options?
« Reply #16 on: February 20, 2014, 01:46:58 PM »
Oh, great just the questions I was asking on another thread out here, Beatdown versus the Melee!

Kidlost do you have a Beatdown.  It looks very much like a Benchmark to me!

Regards,

Luckylefty
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: Brunswick Benchmark Options?
« Reply #17 on: February 20, 2014, 03:14:12 PM »
Actually I do not. But I watch my brother throw it often. I do have a melee some slingshots and some strike kings. Id take the slingshot or strikeking over the melee any day. More versatile balls hands down.
Logged
…… you can't  add a physics term to a bowling term and expect it to mean something.

BackToBasics

  • Hero Member
  • *****
  • Posts: 1110
Re: Brunswick Benchmark Options?
« Reply #18 on: February 20, 2014, 03:31:08 PM »
Quote from: kidlost2000 on February 20, 2014, 03:14:12 PM
Actually I do not. But I watch my brother throw it often. I do have a melee some slingshots and some strike kings. Id take the slingshot or strikeking over the melee any day. More versatile balls hands down.

I've seen you post this a few times and there is no way a Slingshot or Strike King is more versatile than a Melee. The fact that you are able to even use either means that the volume  you are on must be very light. 

The Melee has a stronger cover and core and with surface changes can cover a variety of conditions. At 500/2000 it's in a different ballpark than the Strike King.  The Slingshot and Strike King are  limited by a weak cover and core so you don't have as much versatility with layouts.  I can drill a 5.5" pin Melee and still get it to flare 4-5".   Not even an option with the others. Plus they are pearl which limits their versatility even more.

Logged

Greazygeo

  • Full Member
  • ***
  • Posts: 108
Re: Brunswick Benchmark Options?
« Reply #19 on: February 20, 2014, 03:43:57 PM »
I just got a Meanstreak Beatdown. Drilled pretty strong, box finish for now.  It's pretty smooth rolling. Really hits the pins!  Thinking it will be a good benchmark ball. 

Thought the Melee might be a good step down.  Now I'm thinking they will be too close together.  May go Mastermind for stronger and Lt-48 for weaker.
Logged
2014-15 avg 193  Current arsenal....Faball Red and Brunswick Blue Ringer Solid / Maxim spare ball.

kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: Brunswick Benchmark Options?
« Reply #20 on: February 20, 2014, 03:56:13 PM »
Quote from: BackToBasics on February 20, 2014, 03:31:08 PM
Quote from: kidlost2000 on February 20, 2014, 03:14:12 PM
Actually I do not. But I watch my brother throw it often. I do have a melee some slingshots and some strike kings. Id take the slingshot or strikeking over the melee any day. More versatile balls hands down.

I've seen you post this a few times and there is no way a Slingshot or Strike King is more versatile than a Melee. The fact that you are able to even use either means that the volume  you are on must be very light. 

The Melee has a stronger cover and core and with surface changes can cover a variety of conditions. At 500/2000 it's in a different ballpark than the Strike King.  The Slingshot and Strike King are  limited by a weak cover and core so you don't have as much versatility with layouts.  I can drill a 5.5" pin Melee and still get it to flare 4-5".   Not even an option with the others. Plus they are pearl which limits their versatility even more.




Im not limited by the notion of pearl/solid/or hybrid. I go off of the surface. Otherwise id say at box finish the melee is every bit the pearl ball of a sk or ss. I can say when throwing the melee next to my ringer platinum or the other two balls it is much cleaner through the heads and much more sensitive to oil then the other three balls. When adjusting the surface the sensitivity to oil got worst. This is on medium oil. Just because you think the melee cover is stronger then the strike king doesnt make it a proven fact. From what ive seen on the lanes and discussed with a friend it's given us the same opinion.
Logged
…… you can't  add a physics term to a bowling term and expect it to mean something.

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Brunswick Benchmark Options?
« Reply #21 on: February 20, 2014, 04:30:29 PM »
I am not a fan of the Melee after Parker have so much trouble with it in Japan?

In seeing Videos of the Meanstreak Beatdown it looks like the perfect rounded smooth backend I love from a benchmark ball!  Especially on the wetter left side.

I am a big fan of the my weakly drilled Strike King(especially in relation to its weak core).  Not so much the Sling shot but I picked up one I believe is activator and too smooth for it's weak core.

I am so enamored o the Strike King I almost feel like picking up another and drilling slightly stronger than my Freezes and may the best striker win!

Kidlost, could you tell me more about your brother's Beatdown?  Is he left handed!

I loved this lefty reaction at the later section of this video!
http://www.youtube.com/watch?v=AYAyXZub7u4  starting at the 3:40 mark!

Regards,

Luckylefty
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: Brunswick Benchmark Options?
« Reply #22 on: February 20, 2014, 06:25:46 PM »
No he's not a lefty.

I just drilled my 3rd strike king to try here in a few tonight at league. The core may be weaker but the coverstock makes up for it. Someone was arguing about cores one day along with diff rg ect and how a strike king couldn't hook more then this ball or that because of the core numbers. I showed him a link to the video of my karma pearl (rico layout) and my strike king (rico layout) and how they were both nearly identical from start to finish even though undrilled the diff was different by almost .020 it didn't matter on the lanes. Needless to say that ended his argument.
Logged
…… you can't  add a physics term to a bowling term and expect it to mean something.

todvan

  • Full Member
  • ***
  • Posts: 234
Re: Brunswick Benchmark Options?
« Reply #23 on: February 20, 2014, 06:33:00 PM »
So, here are the results of my demo:

They had a limited selection, but I tried the following:

LT-48
Grease Monkey
Diva

I liked the Grease Monkey best, but it and the LT-48 were just a bit weaker than I wanted.  The Diva was not bad and gave me a little different motion, but not sure about it....

I talked to the Brunswick rep and he thought a stronger symmetric would be the way to go - so I ordered a Meanstreak Beatdown!  Thanks for all the help!
Logged
MOTIV Jackal LE .................40 x 4.5 x 40 p2.5
MOTIV Revolt Vengeance......45 x 4.0 x 50 p3
MOTIV Forza GT ..................50 x 4.0 x 70 p2.5
MOTIV Sigma Sting..............50 x 4.0 x 45 p3

BackToBasics

  • Hero Member
  • *****
  • Posts: 1110
Re: Brunswick Benchmark Options?
« Reply #24 on: February 20, 2014, 07:02:31 PM »
Quote from: kidlost2000 on February 20, 2014, 06:25:46 PM
No he's not a lefty.

I just drilled my 3rd strike king to try here in a few tonight at league. The core may be weaker but the coverstock makes up for it. Someone was arguing about cores one day along with diff rg ect and how a strike king couldn't hook more then this ball or that because of the core numbers. I showed him a link to the video of my karma pearl (rico layout) and my strike king (rico layout) and how they were both nearly identical from start to finish even though undrilled the diff was different by almost .020 it didn't matter on the lanes. Needless to say that ended his argument.

The volume in those videos are obviously extremely light so of course weaker balls will prevail.  If you are on any kind of volume, it will also be obvious how weak they are.

Ball reaction is determined by cover strength and flare. That's not opinion.

Logged

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Brunswick Benchmark Options?
« Reply #25 on: February 20, 2014, 07:24:00 PM »
Kidlost,

If you will please talk about your brothers Benchmark reaction of his Meanstreak Beatdown.

I just watched another lefty in my house looking quite nice with his C system Maxxed out.

I don't know if I need that much flare! or early revv!

Anyone else on today's Meanstreak Beatdown?  Bring it!

Regards,

Luckylefty
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

JustRico

  • Hero Member
  • *****
  • Posts: 2652
Re: Brunswick Benchmark Options?
« Reply #26 on: February 20, 2014, 07:51:25 PM »
Ball reaction is is NOT determined by core strength and flare...that is only a factor if the ball slows down properly and how it then responds to friction
Logged
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

jbkoala

  • Jr. Member
  • **
  • Posts: 53
  • Brunswick x Tokyo
Re: Brunswick Benchmark Options?
« Reply #27 on: February 20, 2014, 09:42:05 PM »
Quote from: kidlost2000 on February 18, 2014, 04:40:57 PM
Quote from: todvan on February 16, 2014, 07:14:20 PM
I am interested in looking at benchmark options from the Brunswick line of ball makers.  Looking for a strong arcing but controlled reaction on house and medium length sport conditions.  Thanks!

Nothing about that says Melee. Malee with a lot of surface....maybe. The ball is extremly clean through the heads and not big down lane. It also doesn't handle oil well. I would take my Slongshot or Strike King over the Melee any day. The Brawler or Beat down depending on the layout and surface would work well along with the Torrid series. If looking at DV8 it would be the Marauder series. The Diva and Diva pearl is a mayber once again with tweaking the surface and depending on the layout.

The Melee is pretty. I would gladly take it on the burn. It is a step down from my Ringer Platinum.

Slingshot is extremely hard to beat on thc if you can get a nice line to the pocket. You barely have to move as well.
Logged

baer300

  • Hero Member
  • *****
  • Posts: 541
Re: Brunswick Benchmark Options?
« Reply #28 on: February 24, 2014, 06:58:41 AM »
Quote from: LuckyLefty on February 20, 2014, 07:24:00 PM
Kidlost,

If you will please talk about your brothers Benchmark reaction of his Meanstreak Beatdown.

I just watched another lefty in my house looking quite nice with his C system Maxxed out.

I don't know if I need that much flare! or early revv!

Anyone else on today's Meanstreak Beatdown?  Bring it!

Regards,

Luckylefty
Quote from: LuckyLefty on February 20, 2014, 07:24:00 PM
Kidlost,

If you will please talk about your brothers Benchmark reaction of his Meanstreak Beatdown.

I just watched another lefty in my house looking quite nice with his C system Maxxed out.

I don't know if I need that much flare! or early revv!

Anyone else on today's Meanstreak Beatdown?  Bring it!

Regards,

Luckylefty

Lefty, The Beatdown is cleaner and a tad more angular than the Maxxed Out was. As far as strength, they were very similar. The Beatdown is pretty aggressive, I still use it when I need something to hook, so don't be afraid to go a little weaker on the drill.
Logged
Adam Baer
Track Regional Staff
Vise Regional Staff

BowlingBallSale

  • Full Member
  • ***
  • Posts: 120
Re: Brunswick Benchmark Options?
« Reply #29 on: February 24, 2014, 10:48:09 AM »
Can you provide some specifics on your game--
1. Ball Speed
2. Rev Rate (estimate)
3. Current arsenal of balls
4. Favorite layout pattern
5. Lane surface(s) you will be mostly bowling on
6. "Typical"/favorite line to play (for determining ball shape)

From Brunswick I like the following releases (medium conditions)
~~ Meanstreak Brawler
~~ Original Aura, slightly scuffed with 2/3k abralon
~~ Melee, drilled strong
~~ Original Ringer, drilled strong
~~ Meanstreak Beatdown, surface adjusted and polish added

These are just my quick thoughts-- the added information you provide will help narrow down a ball for you
Logged
Reax-45x4.5x40(pin down)
Nexus (original)- 45 x 4 x 35 (pin up)
503t-45x4.5x40
Source-60 x 5.5 x 50
Nexxxus f(p+s)-70x5.5x35
Marauder-55x5x50 (2k+polish)
300t-60x5.5x50 (+polish)
Melee-75x6x40 -- Anyone want to buy this?

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Brunswick Benchmark Options?
« Reply #30 on: May 06, 2014, 07:13:30 PM »
On first impression I like the Beatdown.  Smooth and a good powerful rounded curve to the square smashing hit of the pocket.

We will give it more of a whirl!

REgards,

Luckylefty
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana
Pages: 1 [2] 3
« previous next »