Author Topic: Create my Brunswick arsenal (Read 5185 times)

J_w73 · « **on:** March 19, 2010, 10:41:59 AM »

Create my 5 ball brunswick arsenal..
if you think I need more add them in..suggested layouts or ball shape for each ball appreciated.
use the slingshot or rumored avalanche urethane if you think they fit anywhere.
--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

J_w73 · « **Reply #1 on:** March 24, 2010, 03:30:50 AM »

so doing some research this is what I came up with..
any help is appreciated... should this be good , any gaps or overlaps?

Mammoth - already have. rico''d sanded to 200 grit
C-system 3.5 - drill 4-4 1/2 pin to pap . pin up
Wild Card - 4 " pin to pap pin down.
Rattler - 4 1/2 pin to pap . pin close to VAL
Sidewinder- already have. 4" pin to pap.. set up for double thumb without the hole

Avalanche and Avalanche slide - avalanche pin down.. slide pin up
or Avalanche green/black and a sligshot -- g/b pin up.. slingshot pin down or short pin to pap

not sure if I should go to the 5 - 5.5 range with any of them..that is what I usually put on my equipment but I didn''t want anything to get too long and too jumpy.. and over under.

--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

Edited on 3/24/2010 3:37 AM

Edited on 3/24/2010 3:37 AM

Edited on 3/24/2010 3:38 AM

Edited on 3/24/2010 3:38 AM

bowlingnut07 · « **Reply #2 on:** March 25, 2010, 02:58:13 PM »

3.5 c system
Evil seige
rattler
2.5 c system
wild card
--------------------
HIGH game 300 (17)
HIGH series 821

J_w73 · « **Reply #3 on:** March 25, 2010, 04:34:25 PM »

quote:
3.5 c system
Evil seige
rattler
2.5 c system
wild card
--------------------
HIGH game 300 (17)
HIGH series 821

seems like a little strong.. rattler is the weakest ball and that is for heavier medium oily..
--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

charlest · « **Reply #4 on:** March 25, 2010, 04:48:27 PM »

quote:
Mammoth - already have. rico''d sanded to 200 grit

--------------------

Is that Two Hundred grit?? And Rico'd?

Or is that a typo?
--------------------
"None are so blind as those who will not see."

J_w73 · « **Reply #5 on:** March 25, 2010, 04:57:02 PM »

quote:
quote:
Mammoth - already have. rico''''d sanded to 200 grit

--------------------

Is that Two Hundred grit?? And Rico''d?

Or is that a typo?
--------------------
"None are so blind as those who will not see."

yes sir. rico''d .. and sanded to 200 grit.

why do you ask ??
--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

Edited on 3/25/2010 4:58 PM

charlest · « **Reply #6 on:** March 25, 2010, 06:11:40 PM »

quote:
quote:
quote:
Mammoth - already have. rico''''d sanded to 200 grit

--------------------

Is that Two Hundred grit?? And Rico''d?

Or is that a typo?
--------------------
"None are so blind as those who will not see."

yes sir. rico''d .. and sanded to 200 grit.

why do you ask ??
--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

For a dull, high load particle ball, for someone with 350 rpms, that's dull, in the extreme. More so, with a Rico driling, which is already early and even.

--------------------
"None are so blind as those who will not see."

J_w73 · « **Reply #7 on:** March 25, 2010, 06:26:36 PM »

quote:
quote:
quote:
quote:
Mammoth - already have. rico''''''''''''''''d sanded to 200 grit

--------------------

Is that Two Hundred grit?? And Rico''''''''d?

Or is that a typo?
--------------------
"None are so blind as those who will not see."

yes sir. rico''''''''d .. and sanded to 200 grit.

why do you ask ??
--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

For a dull, high load particle ball, for someone with 350 rpms, that''''s dull, in the extreme. More so, with a Rico driling, which is already early and even.

--------------------
"None are so blind as those who will not see."

yeah.. it is a little extreme but it seems to work..I really don''''t use the ball that much at all.. I use it on floods or when I just can''''t get anything to move. Basically the ball is just all cover and does whatever I put into it..
has worked well on some sport patterns and gave me a little bit of area on the Nationals pattern.. not in Reno though.

--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

Edited on 3/25/2010 6:27 PM

Edited on 3/25/2010 6:27 PM

Dean Richards · « **Reply #8 on:** March 25, 2010, 06:49:11 PM »

First suggestion, 200 grit is too much unless used for breaking down patterns.

I bowl for a Brunswick school and everyone seems to like the 3.5. Drill as many as necessary
--------------------
Lindenwood University
www.seismicbowling.com

J_w73 · « **Reply #9 on:** March 25, 2010, 07:01:12 PM »

quote:
First suggestion, 200 grit is too much unless used for breaking down patterns.

I bowl for a Brunswick school and everyone seems to like the 3.5. Drill as many as necessary
--------------------
Lindenwood University
www.seismicbowling.com

I understand it is extreme.. but the ball works.. I can actually use it on a variety of conditions. I don't really use it on a house shot. And if I do, Its an oilier shot and don't seek the dry with this ball. I use it to play in the oil... Maybe it is me subconsciously changing my release to suite the condition.
--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

RSalas · « **Reply #10 on:** March 25, 2010, 09:28:41 PM »

Do you use the Sidewinder now, and if so, what conditions does it cover for you?

Also, do you like to play the lanes straighter from front to back, or do you prefer to see more of a change of direction down lane?
--------------------
Ray Salas
Brunswick Amateur Staff
http://www.brunswickbowling.com

charlest · « **Reply #11 on:** March 25, 2010, 09:30:43 PM »

No insult intended. Maybe it's absorbed enough oil to need that rough surface.

In general, I's expect such a strong oiler to be usable on heavy oil with, say, a 4" pin to PAP and maybe a 600 - 800 grit surface for someone with 350 rpms, even given your high than avg. ball speed of 18. But no one can argue with what works.

--------------------
"None are so blind as those who will not see."

Jay · « **Reply #12 on:** March 25, 2010, 10:49:29 PM »

Are you able to swing the Mammoth? At that surface it seems like any ball wouldn't turn the corner and carry, limiting you to playing up the boards.

I think you should add this to what you already have

Wild Card
C-System 3.5
Python
Avalanche Pearl G/B
Slingshot
--------------------
Justin

J_w73 · « **Reply #13 on:** March 25, 2010, 11:05:16 PM »

quote:
Do you use the Sidewinder now, and if so, what conditions does it cover for you?

Also, do you like to play the lanes straighter from front to back, or do you prefer to see more of a change of direction down lane?
--------------------
Ray Salas
Brunswick Amateur Staff
http://www.brunswickbowling.com

I really like my sidewinder.. I used it for medium -medium heavy..
again usually playing inside and in the oil on a house shot.. I don't like to bounce off the dry.. I primarily change my speed, release and angle to play the break at the end of the pattern..
I do like to see the change in direction on the backend.. but the sidewinder is one of my smoother hooking balls..
--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

J_w73 · « **Reply #14 on:** March 25, 2010, 11:06:44 PM »

quote:
No insult intended. Maybe it's absorbed enough oil to need that rough surface.

In general, I's expect such a strong oiler to be usable on heavy oil with, say, a 4" pin to PAP and maybe a 600 - 800 grit surface for someone with 350 rpms, even given your high than avg. ball speed of 18. But no one can argue with what works.

--------------------
"None are so blind as those who will not see."

It is hardly used.. I have used it probably less than 20 games..
--------------------
18 mph,350 rpm,PAP 5 1/2 x 3/8up, 15 deg axis tilt, varied rotational axis deg.. usually 45+
HighGame 300 x 4, High Series 808
Book Average 205,PBA Xperience 185

Author Topic: Create my Brunswick arsenal (Read 5185 times)

J_w73

Create my Brunswick arsenal

J_w73

Re: Create my Brunswick arsenal

bowlingnut07

Re: Create my Brunswick arsenal

J_w73

Re: Create my Brunswick arsenal

charlest

Re: Create my Brunswick arsenal

J_w73

Re: Create my Brunswick arsenal

charlest

Re: Create my Brunswick arsenal

J_w73

Re: Create my Brunswick arsenal

Dean Richards

Re: Create my Brunswick arsenal

J_w73

Re: Create my Brunswick arsenal

RSalas

Re: Create my Brunswick arsenal

charlest

Re: Create my Brunswick arsenal

Jay

Re: Create my Brunswick arsenal

J_w73

Re: Create my Brunswick arsenal

J_w73

Re: Create my Brunswick arsenal