win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: how to restore my AI's hook and snap?  (Read 1945 times)

hacgumyu

  • Jr. Member
  • **
  • Posts: 28
how to restore my AI's hook and snap?
« on: February 24, 2006, 05:30:06 PM »
I have my AI almost a year. Now it's losing it skid and snap action. I am stroker, 12mph speed. low rev. cuz my AI is 15lbs, and I am weak to rev it alot.

If i try to throw faster, it just skid to the 6&10 pin, no snap arc back to the pocket. Now i only can throw slowly at the 15 board to make it hit the pocket. I used to play at 25 board. I heard oil sink into the ball make it hook less. if true, how to take out the oil soak inside?

Should I resurface the ball? sand to what grit? polish or buff?

thanks alot
Logged

 

Speedburner89

  • Hero Member
  • *****
  • Posts: 1573
Re: how to restore my AI's hook and snap?
« Reply #1 on: February 25, 2006, 01:35:15 AM »
try extracting the oil before you try to change anything about the surface condition
--------------------
Don't trust the moustache
Logged

cooksey

  • Hero Member
  • *****
  • Posts: 918
Re: how to restore my AI's hook and snap?
« Reply #2 on: February 25, 2006, 01:35:26 AM »
Hey, from my experiance Brunswick reccomends heat. Try hot tap water and a little dawn in a bucket or set it out in the sun for a bit in a trash bag. The have it ressurfaced back to factory finish which is 220grit followed by rough buff polish I believe. You can check Brunswicks website also.

cooksey
--------------------
" Focus the next shot is critical"

AIM:johncooksey24
Logged
" Focus the next shot is critical"

AIM:johncooksey24

RevLefty

  • Hero Member
  • *****
  • Posts: 901
Re: how to restore my AI's hook and snap?
« Reply #3 on: February 25, 2006, 09:14:21 AM »
ebonite hook again kit works really good i used it on my buddies
OI that was completely dead left it in chamber for 24 hours cleaned it returned it to original factory settings and it is a brand new ball.  Havent done on any of mine yet cause i dont keep a ball long enough to get oil soaked LOL
--------------------
Boy do I love bowling, stone 8,stone 9, ringer 7,fly by 10,fast six got to love this game.  Short look at what most of my games look like with a few strikes peppered in between.  Isn't it wonderful.
Logged

DON DRAPER

  • Hero Member
  • *****
  • Posts: 5576
Re: how to restore my AI's hook and snap?
« Reply #4 on: February 25, 2006, 05:01:38 PM »
if you want your absolute inferno to return to it's like new condition do what brunswicks recommends:

1) have the oil extracted from the ball with a rejuvenator or revivor machine.

2) have the ball resurfaced with a haus-type machine.

3) the ball's final sanding grit should be 220

4) have a coat of brunswicks rough buff compound applied.

Logged

hacgumyu

  • Jr. Member
  • **
  • Posts: 28
Re: how to restore my AI's hook and snap?
« Reply #5 on: February 25, 2006, 05:42:43 PM »
I just send in my ball to pro shop for sanding. can I heat the ball to extract oil AFTER i resurface it?
Logged

HamPster

  • Hero Member
  • *****
  • Posts: 5584
Re: how to restore my AI's hook and snap?
« Reply #6 on: February 27, 2006, 11:41:47 AM »
The best way is to soak it, or use a rejuvenator.  My preferred method is the soaking, because you can just put the ball in there and forget about it for a while, you don't have to babysit it.
--------------------
New member of the Metal Militia!!!  If you think Simple Plan is metal, then you must die.  And not get to be a member . .\m/!!!
Logged

TheGodFather_LaCN

  • Jr. Member
  • **
  • Posts: 77
Re: how to restore my AI's hook and snap?
« Reply #7 on: February 28, 2006, 05:40:53 PM »
quote:
I just send in my ball to pro shop for sanding. can I heat the ball to extract oil AFTER i resurface it?


No, thats not a good idea.. then the surface of the ball will be yucky...lol... Its good to bake it.. so all/most of oil out..., Then Resurface the ball, and ruffbuff it...  if you cook the ball after resurfacing.. you will be bringing the oil near to the surface of the ball, making the ball less spongy so it wont grip the lane as well..
Logged

Connor

  • Jr. Member
  • **
  • Posts: 61
Re: how to restore my AI's hook and snap?
« Reply #8 on: February 28, 2006, 05:56:07 PM »
I have tried everything including the hot tap water method, and resurfacing th ball...  the two best I have found---

DishWasher -  regular dishwashing detergent is a great degreaser, and its easier than the hot tap water, just make sure you turn off the dry cycle..

Ebonite's Hook again - I was really surprised how much this worked..  just leave it overnight, and vacuum up the hook again stuff when you are done, also very easy to use.
Logged
Pages: [1]
« previous next »