win a ball from Bowling.com

Author Topic: question for brunswick lovers  (Read 2921 times)

budcotten

  • Full Member
  • ***
  • Posts: 126
question for brunswick lovers
« on: August 09, 2007, 07:27:04 AM »
I am looking to have an all Brunswick line-up

current in the bag
Fury-4 inch pin 1000 abralon finish pin above fingers cg kicked out
Schorching Inferno-2 inch pin pin left of ring finger cg is stacked 500 abralon finish 1 inch weight hole
BVP Wizard-3 inch pin ring finger drilled through pin cg near grip center 4000 abralon finish
Power Groove Dry/R-box finish pin above and between fingers

what i want to know if the Fury Pearl and BVP Sidewinder will be a good fit in my line-up

 

Joe Jr

  • Hero Member
  • *****
  • Posts: 2776
Re: question for brunswick lovers
« Reply #1 on: August 09, 2007, 03:36:22 PM »
Fury Pearl would be better, you've enough solids.
--------------------
My Vid
Formerly Brunswick Lefty & Richard Cranium

Quote from Conspirator300:
And yeah, I do know it all.. I don't spend 30+ hours a week learning more about bowling for my heatlh... I do it so I know more than all of you.. which I do. (besides the random few that are staffers/work in the bowling business.. which that population is decreasing little by little)

mxbowler95

  • Jr. Member
  • **
  • Posts: 60
Re: question for brunswick lovers
« Reply #2 on: August 09, 2007, 03:41:58 PM »
If I was you. I would get the Fury Pearl and a Vapor Zone.

budcotten

  • Full Member
  • ***
  • Posts: 126
Re: question for brunswick lovers
« Reply #3 on: August 09, 2007, 03:47:47 PM »
i want to add both balls not just the fury pearl and the sidewinder isnt a solid its a hybrid

budcotten

  • Full Member
  • ***
  • Posts: 126
Re: question for brunswick lovers
« Reply #4 on: August 09, 2007, 04:05:27 PM »
ok what 2 balls would u guys put there then but i really would want those 2

budcotten

  • Full Member
  • ***
  • Posts: 126
Re: question for brunswick lovers
« Reply #5 on: August 09, 2007, 09:14:32 PM »
So I went to get the balls at the pro shop, and who happend to be working the desk? Well it was Mo Pinel himself it was nice to get to meet him he laid out bowl balls for me I cant wait to throw them. I eent with the fury pearl and the bvp sidewinder man that was an awsome night

BallsDeep

  • Hero Member
  • *****
  • Posts: 870
Re: question for brunswick lovers
« Reply #6 on: August 09, 2007, 09:38:31 PM »
That sounds pretty good, but I'd personally add something that is a tad weaker.  A Rampage with a longer pin to pap sounds like it would fit in nicely with the stuff that you already have.  I really don't think that they have anything like the purple thunderstruck, meaning something that is suited for lower volumes of oil, but is smooth rolling.  The reason that I mention that is because everything that you have already is smooth rolling, even the fury pearl should be fairly even with the symmetrical core design.  The closest thing that I can think of would probably be the red pin zone classic, but even that is a pearl.
--------------------
four fried chickens and a coke[/size=4]

Let me say something, let me say something...
AAAAAAAAAAAAAHHHHHHHHHHHHHHHHH

BowlSA

  • Jr. Member
  • **
  • Posts: 37
Re: question for brunswick lovers
« Reply #7 on: August 10, 2007, 12:03:23 AM »
It has been discontinued, but if you can find one, an Ambush would be a nice addition.  I think it is one of the most underrated balls made in the last couple of years.  I have two of them and they cover about 80% of the conditions that I run into.

Hope this helps

budcotten

  • Full Member
  • ***
  • Posts: 126
Re: question for brunswick lovers
« Reply #8 on: August 10, 2007, 08:53:43 PM »
I bowl on all kinds of shots from the pba shots, to the regonal stuff. I also bowl in like 5 different houses, each with different lanes and pattern. But I dont put enough lift on the ball to use something as weak as the rampage my wizard at 4000 is low enough

budcotten

  • Full Member
  • ***
  • Posts: 126
Re: question for brunswick lovers
« Reply #9 on: August 15, 2007, 07:42:50 PM »
so i got the balls drilled i got the fury pearl to complament my fury solid and i got the sidewinder drilled with a nice even arc type drill pin next to ring finger

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7606
Re: question for brunswick lovers
« Reply #10 on: August 16, 2007, 09:42:15 AM »
Many oil balls. I'd suggest a pearl reactive, too. A VZ would be a strong option, condition-wise close to the Wizard IMO just with a different reaction potential. IMO, a FP or Sidewinder would be too close to you existing balls - the only true gap I can really see is under the Wizard and above the Dry/R.

I'd suggest an OOB Rampage for medium to light conditions, or wait for an Avalanche Solid (which also has PK18, but a low flare core that will fit in this gap to the Dry/R, just with less snap potential).
--------------------
DizzyFugu - Reporting from Germany

Confused by bowling?
Check out BR.com's vault of wisdom: the unofficial FAQ section
DizzyFugu ~ Reporting from Germany

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: question for brunswick lovers
« Reply #11 on: August 16, 2007, 09:49:45 AM »
How about a Rampage!  Or Punisher!

ummmm...mmmmm!

REgards,

Luckylefty
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana