LL,
It's clean thru the heads, depending, of course, but your drilling probably killed any flare, at least, normal early flare, and reduced the backend. Again, if you've got a 15 lb-er, the starting RG is close to 2.6, which is fairly HIGH! It's going to be clean EVEN with a leveraged pin position.
Redrill yours normal (3.5 - 5" pin to PAP), then tell us the power of the hit!
FYI yes, standard B'wick finish: 400 grit sand followed by their own high gloss polish (which works very well on any Brunswick ball, thank you very much). I sanded mine to 2000 grit then repolished it; still tons of hitting power on lighter oiled lanes. Now I'm redrilling mine to move pin from 4" to closer to 5" from PAP.
Edited on 2/11/2005 8:59 AM