win a ball from Bowling.com

Author Topic: LT-48 replacement  (Read 7499 times)

Kyobou7

  • Jr. Member
  • **
  • Posts: 18
LT-48 replacement
« on: March 09, 2017, 08:58:51 AM »
Now that the Vintage Lt-48 is discontinued (and I can't find it anywhere on closeout), anyone have any ideas on what a viable replacement would be?

 

Brunswick_fan_BrandonH

  • Hero Member
  • *****
  • Posts: 786
Re: LT-48 replacement
« Reply #1 on: March 10, 2017, 07:02:34 AM »
A Brunswick Rhino would be similar reaction but a little weaker overall. Also, the Rhino would have more of a skid / snap type of reaction because of the pearl coverstock. Another choice would be a DV8 Outcast which has similar numbers to the Vintage LT-48.
Vise Staff Member

BrunsNick

  • Brunswick Rep
  • Hero Member
  • *
  • Posts: 7306
Re: LT-48 replacement
« Reply #2 on: March 10, 2017, 07:16:33 AM »
After I shined up my pin down Fanatic BTU, it is very close to a pin down LT48. Pin up vs Pin up is a different story, the LT48 flares and hooks a bit more.
Nick Smith
Digital Media Manager - Brunswick Bowling
http://www.brunswickbowling.com
http://www.youtube.com/c/brunsnick

Brandon Riley

  • Hero Member
  • *****
  • Posts: 1157
Re: LT-48 replacement
« Reply #3 on: March 10, 2017, 06:44:30 PM »
The DV8 Dude is as close as you'll get to the LT48 but that gem will also be hard to find
Brandon Riley
Brunswick Regional Staff

Snakster

  • Hero Member
  • *****
  • Posts: 767
Re: LT-48 replacement
« Reply #4 on: March 10, 2017, 07:29:05 PM »
Current bag:
DV8 Turmoil 2 Pearl
Radical Squatch hybrid
Motiv Forza GT
Hammer Black Widow Gold
DV8 Vandal
DV8 Creed Rebellion

Kyobou7

  • Jr. Member
  • **
  • Posts: 18
Re: LT-48 replacement
« Reply #5 on: March 11, 2017, 10:55:19 PM »
Thanks for the suggestions, guys.  I am looking at the BTU as a possible in the urethane category, so maybe I'll give that a try.  Snakster, I can live without for that price.  That's just nutty to spend for a ball that was $95-$99 online at one point.  I don't need it that bad :o

leftybowler70

  • Hero Member
  • *****
  • Posts: 1710
Re: LT-48 replacement
« Reply #6 on: March 11, 2017, 11:09:32 PM »
+1 on the dv8 dude, as close as your gonna get to the Lt-48.

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: LT-48 replacement
« Reply #7 on: March 12, 2017, 05:55:45 AM »
Thanks for the suggestions, guys.  I am looking at the BTU as a possible in the urethane category, so maybe I'll give that a try.  Snakster, I can live without for that price.  That's just nutty to spend for a ball that was $95-$99 online at one point.  I don't need it that bad :o

The BTU is not urethane. While it has a urethane-like reaction in overall smoothness, it is most definitely a resin and hooks a nice amount.

Gasoline was once 25 cents a gallon. Does its current price mean you will never buy gasoline again? Buy what you can afford for what you want. Let the past stay in the past. If balls went up in price like cars, the ball you bought in 1993 when resins first came out would now cost $500.
"None are so blind as those who will not see."

leftybowler70

  • Hero Member
  • *****
  • Posts: 1710
Re: LT-48 replacement
« Reply #8 on: March 12, 2017, 07:21:26 AM »
+1

Snakster

  • Hero Member
  • *****
  • Posts: 767
Re: LT-48 replacement
« Reply #9 on: March 12, 2017, 12:39:37 PM »
Thanks for the suggestions, guys.  I am looking at the BTU as a possible in the urethane category, so maybe I'll give that a try.  Snakster, I can live without for that price.  That's just nutty to spend for a ball that was $95-$99 online at one point.  I don't need it that bad :o

Don't blame you.  I'd feel the same.
Current bag:
DV8 Turmoil 2 Pearl
Radical Squatch hybrid
Motiv Forza GT
Hammer Black Widow Gold
DV8 Vandal
DV8 Creed Rebellion

BrunsNick

  • Brunswick Rep
  • Hero Member
  • *
  • Posts: 7306
Re: LT-48 replacement
« Reply #10 on: March 12, 2017, 01:04:59 PM »
Thanks for the suggestions, guys.  I am looking at the BTU as a possible in the urethane category, so maybe I'll give that a try.  Snakster, I can live without for that price.  That's just nutty to spend for a ball that was $95-$99 online at one point.  I don't need it that bad :o

The BTU is not urethane. While it has a urethane-like reaction in overall smoothness, it is most definitely a resin and hooks a nice amount.

Gasoline was once 25 cents a gallon. Does its current price mean you will never buy gasoline again? Buy what you can afford for what you want. Let the past stay in the past. If balls went up in price like cars, the ball you bought in 1993 when resins first came out would now cost $500.

I don't agree with this analogy. There's a difference between inflation and this, otherwise a plastic ball from 1993 NIB would go for 100's as well.
Nick Smith
Digital Media Manager - Brunswick Bowling
http://www.brunswickbowling.com
http://www.youtube.com/c/brunsnick

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: LT-48 replacement
« Reply #11 on: March 12, 2017, 01:49:05 PM »
Thanks for the suggestions, guys.  I am looking at the BTU as a possible in the urethane category, so maybe I'll give that a try.  Snakster, I can live without for that price.  That's just nutty to spend for a ball that was $95-$99 online at one point.  I don't need it that bad :o

The BTU is not urethane. While it has a urethane-like reaction in overall smoothness, it is most definitely a resin and hooks a nice amount.

Gasoline was once 25 cents a gallon. Does its current price mean you will never buy gasoline again? Buy what you can afford for what you want. Let the past stay in the past. If balls went up in price like cars, the ball you bought in 1993 when resins first came out would now cost $500.

I don't agree with this analogy. There's a difference between inflation and this, otherwise a plastic ball from 1993 NIB would go for 100's as well.

I'm trying to convince him to buy the BTU and you're contradicting me. :)

Inflation affects gas, milk and bowling balls, but Bowling has kept the price of balls more than reasonable.
"None are so blind as those who will not see."

BrunsNick

  • Brunswick Rep
  • Hero Member
  • *
  • Posts: 7306
Re: LT-48 replacement
« Reply #12 on: March 12, 2017, 02:07:50 PM »
It sounded like you were trying to convince him to pay the extra for the Lt48 based off of the gasoline analogy. My mistake then. Carry on :)
Nick Smith
Digital Media Manager - Brunswick Bowling
http://www.brunswickbowling.com
http://www.youtube.com/c/brunsnick

Kyobou7

  • Jr. Member
  • **
  • Posts: 18
Re: LT-48 replacement
« Reply #13 on: March 12, 2017, 02:59:02 PM »
Charlest, it's working ;D.  I plan on buying the BTU once my money straightens up.