win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Holy Pin!  (Read 3628 times)

Bar5003

  • Hero Member
  • *****
  • Posts: 1627
Holy Pin!
« on: November 02, 2007, 05:09:59 AM »
http://www.brunswickinsiders.com/PBA%20Tournaments/02Taylor/PhotosTaylor/photosbowlingballs/tennelletwisted.jpg

When did Brunswick start going with the MO sized pins?  Did i miss something?  Seems like some of the others aren't as big, but still big...
--------------------
~Britton~

Owner and Operator of

www.videoballreviews.com

VISE inserts The OFFICAL grip of videoballreviews.com

www.viseinserts.com
Logged

 

WSUstroker

  • Hero Member
  • *****
  • Posts: 2562
Re: Holy Pin!
« Reply #1 on: November 02, 2007, 01:12:04 PM »
Brit, it seems on and off on which balls get Mo-Pins.  I've seen several balls with them and several without.  This has been going on for a few months at least, but it isn't consistent when they do show up.
--------------------
Dan Chambers
www.absolutebowling.com
Logged

Joe Jr

  • Hero Member
  • *****
  • Posts: 2776
Re: Holy Pin!
« Reply #2 on: November 02, 2007, 01:13:42 PM »
There not doing that on purpose. I've seen a few Inferno remakes and Furys with pins like that. You can actually the normal pin the giant filler or whatever is over the normal pin.
--------------------
My Vid
Formerly Brunswick Lefty & Richard Cranium

Quote from Conspirator300:
And yeah, I do know it all.. I don't spend 30+ hours a week learning more about bowling for my heatlh... I do it so I know more than all of you.. which I do. (besides the random few that are staffers/work in the bowling business.. which that population is decreasing little by little)
Logged

Bar5003

  • Hero Member
  • *****
  • Posts: 1627
Re: Holy Pin!
« Reply #3 on: November 02, 2007, 01:16:11 PM »
Hmm interesting...anyone have a real answer on this one?  Is it to cover up a pin that didn't come out quite right in the manufacturing process?

To the trolls:

Don't turn this into a Big B bashing thread or it will get locked!
--------------------
~Britton~

Owner and Operator of

www.videoballreviews.com

VISE inserts The OFFICAL grip of videoballreviews.com

www.viseinserts.com
Logged

MegaMav

  • Hero Member
  • *****
  • Posts: 3409
Re: Holy Pin!
« Reply #4 on: November 02, 2007, 01:22:04 PM »
Brit,

I think if the pin cracks during the curing process, the pin is drilled out and filler poured into the hole.
--------------------
BowlingChat.net - "Welcome to the Underground"
BowlingWiki.net - "Where Bowlers Write History"
Logged

pop_1

  • Hero Member
  • *****
  • Posts: 1140
Re: Holy Pin!
« Reply #5 on: November 02, 2007, 01:33:55 PM »
Just curious.  If the pin is big, and we are not supposed to drill within 1" of the pin, does that limit layouts?  My driller has drilled into pins and even drill some of mine out, but I know it is supposed to void the warranty if the ball cracks.
Logged

KDawg77

  • Hero Member
  • *****
  • Posts: 11594
Re: Holy Pin!
« Reply #6 on: November 02, 2007, 01:36:05 PM »
The ball is sad. It's "Mo-pin" around.
--------------------
Ken
Defender of the logical thinking center. I have no time for extremists.
http://www.myspace.com/lefthandedhammerpride
http://members.bowl.com/FindAMember/memberView.aspx?mp=418&ms=2006&s=2006-2007


Edited on 11/2/2007 1:36 PM
Logged

WSUstroker

  • Hero Member
  • *****
  • Posts: 2562
Re: Holy Pin!
« Reply #7 on: November 02, 2007, 01:45:04 PM »
quote:
The ball is sad. It's "Mo-pin" around.




Wow, that's bad, even for a friday man.

--------------------
Dan Chambers
www.absolutebowling.com
Logged

KDawg77

  • Hero Member
  • *****
  • Posts: 11594
Re: Holy Pin!
« Reply #8 on: November 02, 2007, 01:46:19 PM »
One of my myriad of useless skills.
--------------------
Ken
Defender of the logical thinking center. I have no time for extremists.
http://www.myspace.com/lefthandedhammerpride
http://members.bowl.com/FindAMember/memberView.aspx?mp=418&ms=2006&s=2006-2007
Logged

azus

  • Hero Member
  • *****
  • Posts: 1867
Re: Holy Pin!
« Reply #9 on: November 02, 2007, 01:47:54 PM »
I like the bigger pin:s better than the standard sized.
--------------------
I like my coffee black, just like my metal.
What would Chuck Norris do?
(\ /)
( . .)
c(')(')
Cute Bunny! copy bunny into sig to help him achieve world domination
Logged

qstick777

  • Hero Member
  • *****
  • Posts: 5188
Re: Holy Pin!
« Reply #10 on: November 02, 2007, 02:20:33 PM »
I'm curious about the process as well.

From the old Columbia site:
http://columbia300.net/innovation/techdocs.cfm?id=19

quote:

"The Assembly Process"
A hole is drilled in the core, and the core is placed on a pin at the required height in the mold. The cut-a-way picture shows a core positioned on a pin before pouring. The rest of the mold is then assembled and the shell material is poured.

After the shell material has been poured and allowed to harden, the mold will be broken away from the ball and the pin removed leaving a hole. This hole is then plugged with a different color resin in order to help your pro shop determine where the core is positioned under the shell.


From the Ebonite factory video from the History Channel, it looked to be a similar process.

I had wondered about how "bad pins" were created, and BrunsNick was able to give a little insight, but I don't think either of us were able to find out how exactly a "bad pin" is formed.

I wonder if the pin can sometimes be inserted into the core at an incorrect angle, or maybe it shifts during the molding process?

I always thought that the pin was the actual part that was inserted into the core and that the rest of the ball was molded around it. Then I figured the pin was cut down and eventually smoothed out during the final cutting/sanding process. Pins always seemed more "plastic" to me than the rest of the coverstock.


If it is actually drilled out and replugged, maybe they are just using a larger bit (for what ever reason).

--------------------
Unoffical Ballreviews.com FAQ

Search Ballreviews entire database here
Logged

NateNice

  • Hero Member
  • *****
  • Posts: 649
Re: Holy Pin!
« Reply #11 on: November 02, 2007, 04:06:33 PM »
Brunswick makes every nth ball with a large pin like that.  It's part of their manufacturing process.  Those balls are used as a quality control metric or something.  There's nothing at all different about the ball.

I remember reading something to this effect from one of the Brunswick people around here.
Logged
Pages: [1]
« previous next »