win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Rampage + Rough Buff  (Read 1309 times)

alloutsmith3

  • Sr. Member
  • ****
  • Posts: 406
Rampage + Rough Buff
« on: January 10, 2007, 11:39:50 AM »
Just wondering if anyone has used rough buff or knows someone that has used rough buff on a Rampage. I was thinking about giving it a try to get a different look with the ball and wanted to get some opinions first. Thanks

Jason
Logged

 

alloutsmith3

  • Sr. Member
  • ****
  • Posts: 406
Re: Rampage + Rough Buff
« Reply #1 on: January 10, 2007, 08:13:32 PM »
Really just looking to smooth the break point out and bring it back a little. If this doesn't do it I was thinking about putting a x-hole on my PAP.
--------------------
------------
Jason Smith
Logged

alloutsmith3

  • Sr. Member
  • ****
  • Posts: 406
Re: Rampage + Rough Buff
« Reply #2 on: January 10, 2007, 08:34:52 PM »
Ya, I know the ball is naturally skid/flip in nature, which is fine, I just wanted to see if I could get it to make a less dramatic move off the dry. I might just have to place it in a different spot in the arsenal than was originally intended. Thanks for the replies.
--------------------
------------
Jason Smith
Logged

Corey C

  • Sr. Member
  • ****
  • Posts: 348
Re: Rampage + Rough Buff
« Reply #3 on: January 10, 2007, 10:12:36 PM »
Even give 4000 abralon a try, then 2000 if it's still too flippy. Abralon with no polish is easier to duplicate than rough buff polish.
--------------------
Corey Clayton
Brunswick Amateur Staff
Turbo Grips Staff
Team Canada
Check out my arsenal in my profile.
Logged
Corey Clayton
Brunswick Regional Staff
Turbo Staff

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Rampage + Rough Buff
« Reply #4 on: January 11, 2007, 06:39:07 AM »
quote:
Ya, I know the ball is naturally skid/flip in nature, which is fine, I just wanted to see if I could get it to make a less dramatic move off the dry. I might just have to place it in a different spot in the arsenal than was originally intended. Thanks for the replies.
--------------------
------------
Jason Smith


I would suggest first trying a green nylon pad and by hand LIGHTLY roughing up the surface, just enough to take some of the shine/gloss of the ball.

You shouldn't use Rough buff over the existing cover. To do it right, you'd need to sand the ball to 220 or 320 grit and then apply Rough Buff over it.

The nylon pad may be all you need or will, at least, give you a "flavor" for the reaction that will smooth out the flip of the stock surface.
--------------------
"None are so blind as those who will not see."
Logged
"None are so blind as those who will not see."
Pages: [1]
« previous next »