BallReviews

Equipment Boards => Brunswick => Topic started by: BrunswickBowler123 on February 19, 2007, 07:16:18 AM

Title: Red Zone Help
Post by: BrunswickBowler123 on February 19, 2007, 07:16:18 AM
do i need to keep it shined as it is or put back at 2000 grit
Title: Re: Red Zone Help
Post by: rackattack on February 19, 2007, 03:28:05 PM
Yes
--------------------
It's all about the X
Title: Re: Red Zone Help
Post by: shelley on February 19, 2007, 03:32:09 PM
Depends on what it's doing.  What's the base grit?  OOB at 400+polish?  I think 2000-grit sanded will be similar in hook potential but slightly smoother.

SH
Title: Re: Red Zone Help
Post by: BrunswickBowler123 on February 19, 2007, 04:15:34 PM
it was 2000 grit then i shined it and its at 600 grit shined
Title: Re: Red Zone Help
Post by: chrisleftwich on February 19, 2007, 04:18:29 PM
Mine actually had a better roll when I went with Brunswicks ruff buff.
--------------------
Chris Leftwich
Active Duty Coast Guard member.
Title: Re: Red Zone Help
Post by: BrunswickBowler123 on February 19, 2007, 04:44:23 PM
its OOB and i want it to go longer than wut it is doing
Title: Re: Red Zone Help
Post by: BrunsMike on February 19, 2007, 05:03:17 PM
1st you say "it was 2000 grit then i shined it and its at 600 grit shined" then you say; "its OOB and i want it to go longer than wut it is doing". You just totally contradicted yourself with that statement. OOB of a red zone I thought was 400 grit rough buff.

Honestly, we need a video of your style rolling the red zone of at least 4-5 shots to get a feel of your form before anyone can really say this will work better then that.
--------------------
Mike Zadler
Using the best brand in the nation, BRUNSWICK!!!
Below, my stats from previous seasons:
http://members.bowl.com/FindAMember/memberView.aspx?ms=12886&mp=552&s=2005-2006
Winter season averages at Sunset Lanes in Waukegan IL.
Wed. Nite Ave: 196
Thur. Nite Ave: 216
http://www.BrunsNick.com
Title: Re: Red Zone Help
Post by: shelley on February 19, 2007, 05:07:25 PM
quote:
OOB of a red zone I thought was 400 grit rough buff.


400-grit plus polish, not RB.  600-grit polished (same polish?) should be a little longer.  You could go up to 1000-grit polished to get extra length.  I think 2000-grit sanded will be earlier or at least smoother in spite of the higher sanding finish.

SH
Title: Re: Red Zone Help
Post by: jr_300 on February 19, 2007, 08:05:13 PM
i hit my dads with a used grey pad (800-1000) and it made a huge differnce. it picked up earlier as expected but still made the turn in the oil. it also smoothed out the breakpoint if fed to the dry. it deffinetly made the ball more versitle, and available for more use.
--------------------
Jr
Brunswick Ebonite and Hammer... three different companies, one goal... to score