win a ball from Bowling.com

Author Topic: Struggle looking for a Dry Lane Ball.  (Read 4276 times)

Loudstriker

  • Hero Member
  • *****
  • Posts: 1528
Struggle looking for a Dry Lane Ball.
« on: February 21, 2006, 11:50:53 AM »
Right now I am in the persute of a Dry Lane ball. I have been looking at three different choices. The Slate Blue Gargoyle by Visionary, Groove Urathane, or Power Groove Dry/R. I was leaning towards the Gargoyle until my friend recently witnessed one at a tournament that snapped in oil. So I thought about the Groove Urathane but I know Urathane wants to start up early so that got me thinking about the Dry/R. I have High Revs and High Track. My Smokin' can not be used on anything less than true Medium Oil and is a true Medium Heavy Oil ball for me. When you suggest a ball, could you suggest a drilling pattern as well? I was thinking of a few but wasn't sure if they would work.
Thanks.
--------------------
Things to do at a Bowling Alley
Bring full angling gear, ask how they're biting.....fish.  
Check Profile for bigger list
----------------------
Visit my chat site. Anyone welcome!
http://www.freewebs.com/bowlersheaven/bowlingchat.htm
If it doesn't work look for the directions in the profile.
----------------------
Proud member of the Nation!

Edited on 2/21/2006 8:37 PM

 

a_ak57

  • Hero Member
  • *****
  • Posts: 10584
Re: Struggle looking for a Dry Lane Ball.
« Reply #1 on: February 21, 2006, 08:04:56 PM »
If the smokin is that strong for you, I'd look at plastic.  Don't worry about the hit.  If the lanes warrant you using plastic, it will hit just as hard as reactive.
--------------------
- Andy

Triple X

  • Sr. Member
  • ****
  • Posts: 276
Re: Struggle looking for a Dry Lane Ball.
« Reply #2 on: February 22, 2006, 12:52:58 AM »
Go for the power groove dry/r & drilled pin on the bridge & Cg about 5 1/2 from your pap towards the neg. side.(5 x 5 1/2 from pap)This is a good long & control layout for this ball on those light to dry lanes.

Brunswick drilling sheet recommend pin positions of 4 1/2 - 5 3/4 for drier lanes.
--------------------
Thanks,

Triple X



You wouldn't know the true meaning of bowling 'til you use a "BUZZSAW."

Cranking_Inferno

  • Sr. Member
  • ****
  • Posts: 394
Re: Struggle looking for a Dry Lane Ball.
« Reply #3 on: February 22, 2006, 02:00:18 PM »
Try a Panic from Columbia300

I do use my Smoking for dryer conditions, so either you throw slow or turn the cr@p out of it ... if thats the case then you ned to back off the revs and project the ball further ..
--------------------
Arsenal:

EPX-T1 - Heavy oil
Action- Heavy to Medium oil
Original Inferno - Medium oil
Smoking Inferno - Medium to Dry
Blue Dot - Spare ball

Cranking_Inferno

  • Sr. Member
  • ****
  • Posts: 394
Re: Struggle looking for a Dry Lane Ball.
« Reply #4 on: February 22, 2006, 02:01:44 PM »
Aslo try a XXXL from Lane#1.. its a true plastic ball, but with a fat core in it.. it really works for dry lanes.
--------------------
Arsenal:

EPX-T1 - Heavy oil
Action- Heavy to Medium oil
Original Inferno - Medium oil
Smoking Inferno - Medium to Dry
Blue Dot - Spare ball

Dean Richards

  • Sr. Member
  • ****
  • Posts: 315
Re: Struggle looking for a Dry Lane Ball.
« Reply #5 on: February 22, 2006, 03:10:25 PM »
I know this a Big B page but i think columbia makes the best dry lane balls and mid performance. I have drilled probably 20 something balls the last year and haven't left my ebonite ice for anything else. true dry lane ball.
--------------------
Dean Richards

NW Bowler Forum
go to: www.somoff.com/forums
Multiple casher in handicap 9 pin events

shelley

  • Hero Member
  • *****
  • Posts: 9655
Re: Struggle looking for a Dry Lane Ball.
« Reply #6 on: February 22, 2006, 03:32:20 PM »
If you're concerned about the hit with the Groove Urethane (since it has a pancake weight block), what about the Pure Hammer?  It has a real core and a urethane cover.  Cheaper than an XXXL, too.

SH

102101

  • Hero Member
  • *****
  • Posts: 583
Re: Struggle looking for a Dry Lane Ball.
« Reply #7 on: February 22, 2006, 03:56:07 PM »
Loudstriker I picked up a Dry/R for myself and at the same time
my wife got the Slate Blue Gargoyle. The Slate Blue Gargoyle is
a very good ball on dry lanes and I wish I would have went with
it instead of the Dry/r. It has the length you need and still
has great hit due to having a real core. Any questions about
either feel free to PM.
--------------------
102101? Hmmmm
www.blackhawklanes.com

John D Davis

  • Hero Member
  • *****
  • Posts: 705
Re: Struggle looking for a Dry Lane Ball.
« Reply #8 on: February 22, 2006, 04:01:04 PM »
Hey there... I think the smoking will be the best dry lane ball....I know it might be strong now but if theres any way possible you can put a weight hole in it if it doesnt have one now and add some thumb weight... Then polish it up to no less than 2000 wet sanded and then shined with Finesse It and it will be perfect!! If you dont have another ball I wouldnt do this but the smoking inferno can be tweaked to be one of the best dry lane balls ever made!!!! GL

kingpin268

  • Hero Member
  • *****
  • Posts: 1680
Re: Struggle looking for a Dry Lane Ball.
« Reply #9 on: February 22, 2006, 07:02:52 PM »
Guys, I have personally seen Loud's Smoking and there is no way that ball will handle drier conditions ever. A couple months ago, the lane machine went wild and put down a very long fairly heavy pattern and I observed that everybody's balls were not even losing rotation by the backend including me (but I'm a low tracker lol). But his SI, while it's drilled pretty strong, revved up smoothly in the midlane, went to about 45-50 feet and then made a strong arc. I mean that ball was getting into a roll (probably due to Loud's style and game) while everybody else had trouble getting the ball to wrinkle. So I think the SI is out of the question. For me, with my low track and lower rev rate, could probably use the SI on light to dry conditions with the right drilling and cover prep but not him.

Sam, my advice, dry lanes force many people out of their A-games especially those with higher tracks and revrates. Myself, I'm not as affected by them as you are. Point is, everybody has to make BIG adjustments on dry lanes if your not throwing plastic. In Slatebelt, getting deeper is not the answer in most cases on a reverse block with dry middle and semi-oily outsides. Next time I bowl with you (which wont' be for a while lol), you'll have to experiment with some new releases, etc. But I do agree, you need a dry lane ball, so go ahead and decide. But if you can make a big release change, you can stay with stronger balls longer and not worry about losing carry when switching to weaker multiple piece cores.
--------------------
Only One More Ball I Promise

Loudstriker

  • Hero Member
  • *****
  • Posts: 1528
Re: Struggle looking for a Dry Lane Ball.
« Reply #10 on: February 25, 2006, 08:35:48 PM »
I was looking at the Brunswick Ball comparison chart from BTM and I saw that the Dry/R is actually shown weaker than the Groover Urathane. Is this true?
--------------------
Things to do at a Bowling Alley
Bring full angling gear, ask how they're biting.....fish.  
Check Profile for bigger list
----------------------
Visit my chat site. Anyone welcome!
http://www.freewebs.com/bowlersheaven/bowlingchat.htm
If it doesn't work look for the directions in the profile.
----------------------
Proud member of the Nation!

sportbowler

  • Hero Member
  • *****
  • Posts: 1404
Re: Struggle looking for a Dry Lane Ball.
« Reply #11 on: February 25, 2006, 11:26:09 PM »
XXXL, true dry lane ball. You have high revs it will work out great. I have not heard alot of good things about Dry/r's, very unpredictable from what I have heard. To much cover for the core. I just learned how to take every thing out of the ball and throw it really hard, works great on dry with light equipment.

Good luck!
--------------------
Brunswick.
¡Viva la nación de Brunswick!

Bowlingkingdom.com! Check it out!

azguy

  • Hero Member
  • *****
  • Posts: 8364
Re: Struggle looking for a Dry Lane Ball.
« Reply #12 on: February 26, 2006, 06:48:57 AM »
If you want to save some money on a good dry lane ball, I'll also suggest a Power Groove. They are a bit stronger than some others mentioned, but...the cover will accept just about anything you want to do with them. Given the right adjustment I'd bet they couls go from med/heavy all the way to bone dry.

A lot of balls will accept changes, have to try them, some just won't. IMO, people will spend to much for a ball they think will work only to see or find out later, something cheaper would work better with cover changes....again, JMO.
--------------------
AZ Guy aka: R & L Bowlers Pro
rlbowlerspro@cox.net
www.rlbowlerspro.com

Sleep is over rated.

Loudstriker

  • Hero Member
  • *****
  • Posts: 1528
Re: Struggle looking for a Dry Lane Ball.
« Reply #13 on: February 26, 2006, 12:34:08 PM »
Right now I am thinking of getting the Dry/R, taking the cover up to 4000 grit and then applying polish. This should work for the days when lanes havn't been oiled in a couple of days or when there have been many games (9+ games with 5 bowlers on each lanes using monsters). This may be what I'm looking for.
--------------------
Things to do at a Bowling Alley
Bring full angling gear, ask how they're biting.....fish.  
Check Profile for bigger list
----------------------
Visit my chat site. Anyone welcome!
http://www.freewebs.com/bowlersheaven/bowlingchat.htm
If it doesn't work look for the directions in the profile.
----------------------
Proud member of the Nation!

kingpin268

  • Hero Member
  • *****
  • Posts: 1680
Re: Struggle looking for a Dry Lane Ball.
« Reply #14 on: February 26, 2006, 01:42:29 PM »
quote:
bowlers on each lanes using monsters


Sorry Sam. lol
--------------------
Only One More Ball I Promise