win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Surface Change  (Read 1884 times)

bigdawgwill44

  • Sr. Member
  • ****
  • Posts: 281
Surface Change
« on: January 14, 2008, 02:11:48 PM »
Is there any way to mess with the surface of my vapor zone to make it more suitable for dry wood lanes?
Logged

 

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7606
Re: Surface Change
« Reply #1 on: January 15, 2008, 01:42:38 AM »
You can polish it - but Activator+ has been known to react very erratically when glossy, or very strongly in general to surface changes. With polish, it is love or hate, and very condition-specific.

Another option I can think of is to try a fine base grit and then apply Rough Buff - this will also give more length, but I am not sure about the overall reaction because RB is very abrasive/coarse. I found that this does not work well, kills the reaction - but it might be the solution you are looking for. A 1.000 grit base or finer should do.

Another thing that comes to my mind is to try a very fine compound finish, e. g. the 3M "Finesse It" Trizact compound. It will, on a fine base grit, yield a glossy surface without polish. I made quite good experience with it on PK18, the ball glides well through the heads as long as there is some oil, but the back end read is quite consistent - even though the ball will have a little less length than a truly polished one.

Good luck, though.
--------------------
DizzyFugu - Reporting from Germany

Confused by bowling?
Check out BR.com's vault of wisdom: the unofficial FAQ section
Xmas special: a handy Java online score calculator
Logged
DizzyFugu ~ Reporting from Germany

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Surface Change
« Reply #2 on: January 15, 2008, 08:43:46 AM »
The VZ's stock surface is 220 grit + Rough buff bringing it close to what Bruns Reps have described as about 2000 grit matte or dull. You can try a 4000 grit Abralon pad for more length and less backend.

Also you can try a straight change: sand it to 400 grit and add Brunswick's own polish. This should also roughly be the next step in skid/length. The next step, if this is not enough, is 600 grit + Brunswick's High Gloss polish. Be careful with the polish; it's too easy to take it a step too far.

FYI B'wick's HG polish has no abrasive in it, last time I checked; so it keeps the underlying grit level. This makes it easy to go step-by-step in smoother, higher number grit levels.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ
Logged
"None are so blind as those who will not see."

tburky

  • Hero Member
  • *****
  • Posts: 1071
Re: Surface Change
« Reply #3 on: January 15, 2008, 03:07:30 PM »
quote:
the problem is its BRUNSWICK!!!!. I live in muskegon mi. where the used to make their balls, when they moved to mexico that took jobs from our city. so alot of people are upset!!!.But i switched to STORM long ago , last year i shot my first  300/800-267,300,249-816,32 out 36 strikes with a paridigm.just got a paridigm domination last week 683 first nite. if you ain't throwing storm, you ain't bowling!!!!


what the hell does this have to do with changing vapor zone surface? Just curious.
Logged

DON DRAPER

  • Hero Member
  • *****
  • Posts: 5576
Re: Surface Change
« Reply #4 on: January 16, 2008, 05:10:34 AM »
the vapor zone wasn't really designed for drier lanes. in the hands of someone with higher ball speeds( 20+mph )or someone who throws a spinner this ball may work on this condition but i think your best bet is to use a different ball intended for drier lanes.
Logged

DON DRAPER

  • Hero Member
  • *****
  • Posts: 5576
Re: Surface Change
« Reply #5 on: January 16, 2008, 05:12:14 AM »
the vapor zone wasn't really designed for drier lanes. in the hands of someone with higher ball speeds( 20+mph )or someone who throws a spinner this ball may work on this condition but i think your best bet is to use a different ball intended for drier lanes.

bigdave300816, have you stopped using bowling bags or bowling shoes ? i was just wondering since they're not made in this country .....
Logged
Pages: [1]
« previous next »