win a ball from Bowling.com

Author Topic: powrkoil 17  (Read 3090 times)

rico4life

  • Full Member
  • ***
  • Posts: 227
powrkoil 17
« on: March 21, 2014, 05:18:09 PM »
Just a question for the Brunswick people out there, the power groove reactives have this cover and so does the slingshots but bowlingball.com says that the slingshot hooks a lot more. I understand that they have two different cores, I just want to drill the slingshot for shorter patterns, but am afraid it might hook too much.

 

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: powrkoil 17
« Reply #1 on: March 21, 2014, 06:57:52 PM »
1. The Slingshots never hooked as much as the pearl Power Grooves because the PG had much a larger RG differential. There were several varieties of Power Grooves including solids and Particle Pearls. They are much different than the "plain" pearls. Slingshots only came in pearlized PK 17, except for the Pink/Purple one which used a different coverstock (Activator, I believe).

2. The Slingshots hardly hooked at all. It was one of the closest resin balls to urethane that I have ever thrown and I am rev dominant.
"None are so blind as those who will not see."

jbkoala

  • Jr. Member
  • **
  • Posts: 53
  • Brunswick x Tokyo
Re: powrkoil 17
« Reply #2 on: March 21, 2014, 11:00:55 PM »
I have three slingshots and none of them overhooks at all, and I am massively rev dominant two hander on dry wood lanes. if you bowl on newer lanes, it will never ever overhook.


kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: powrkoil 17
« Reply #3 on: March 22, 2014, 08:11:57 AM »
I have been a big fan of both. The Slingshot will have the newest version of PK17 so it may be a bit more aggressive cover then that used on the Power Grooves.

When comparing the Slingshot with any power groove using pk17 I have found the power groove to be the bigger hooking ball. It has a much larger differential and also a higher intermediate differential.

The PG is an asymmetric core ball because of the two hook pucks in the bottom actually being off center. I have four of them currently undrilled in my closet that were spun on a determinator. The PSA ended up being in line with the pin and cg on all four bowling balls. However the pin was actually on average 1" to almost 2" further away then marked.

So something to keep in mind of you buy a power groove.

Either ball can be a good choice depending on your style and the lane condition along with the layout chosen.
« Last Edit: March 22, 2014, 09:08:12 AM by kidlost2000 »
…… you can't  add a physics term to a bowling term and expect it to mean something.