Author Topic: want to try brunswick (Read 9680 times)

mechanic81 · « **on:** August 23, 2016, 01:02:42 PM »

ok about me ive been using storm and 900 global stuff for several years and wanted to try something new im a tweener with med. revs and speeds at abt 15mph i want to try brunswick equip. iv had better luck with polished bowling balls. ive been looking at the melee jabor the vintage danger zone mostly bowling on ths med oil what would some,of you suggest or are there other options as well thanks,for your time

JPbowling151 · « **Reply #16 on:** August 24, 2016, 05:48:44 PM »

Quote from: Snakster on August 24, 2016, 05:06:39 PM

Quote from: JPbowling151 on August 24, 2016, 02:38:38 PM
If you have a problem reading your reaction due to it being a solid cover, just use white or any bright colored grips/slugs and you're good to go!!

My god.....I'm an idiot.

So the fingers would be visible?

It's worked for me, white thumb slug and white grips make my ball rolling down the lane visible enough to see where my ball is breaking down lane, it won't be as obvious as a bright multi-colored ball but at least it's visible. I'd imagine brighter color grips would be even better, like neon green or pink would stick out more.

amyers2002 · « **Reply #17 on:** August 25, 2016, 08:26:14 AM »

Sure use any of the bright colored inserts and they really stand out against the black. I think it's actually easier to read with the solid black balls than it is with the more vibrant multicolored balls. So much so that when I purchased my Rhino I had the PSO order a black one even though he had the colored ones in stock.

JohnP · « **Reply #18 on:** August 25, 2016, 05:09:18 PM »

If you want even more color flashing you can have your driller punch one or more holes and then plug them with a light color plug. Keep these plugs out of your ball's track. -- JohnP

AMF300bowler · « **Reply #19 on:** August 26, 2016, 10:56:52 AM »

>> i want to try brunswick equip.

Just remember that Brunswick is the ONLY bowling ball manufacturer that makes their equipment in Mexico just to squeeze a dew bucks extra profit out of each ball. Every other ball manufacturer makes their balls in the USA and all are profitable, too.

Are you willing to support Mexican jobs over USA jobs when you have a choice?

amyers2002 · « **Reply #20 on:** August 26, 2016, 11:14:16 AM »

Oh for God's sakes is it really necessary to bring that crap into every post about Brunswick. You know they do still employ quite a few people on this side of the border too?

2handedvolcano · « **Reply #21 on:** August 26, 2016, 12:39:52 PM »

Brunswick is not the only outsources as storm has some in China

mike497 · « **Reply #22 on:** August 26, 2016, 01:33:00 PM »

Quote from: 2handedvolcano on August 26, 2016, 12:39:52 PM

Brunswick is not the only outsources as storm has some in China

Where is the T-Zone made? Are they pouring that in the Mexico plant, or is someone here in the States pouring it for them?

mechanic81 · « **Reply #23 on:** August 26, 2016, 05:39:09 PM »

im sorry to say but it doesnt really make a difference to me most companies that make stuff here in the states still have their materials sourced from other countries if you pay attention to some the stuff you buy now most of it says built in the usa using foreign materials.

tkkshop · « **Reply #24 on:** August 26, 2016, 06:31:07 PM »

Quote from: mechanic81 on August 26, 2016, 05:39:09 PM

im sorry to say but it doesnt really make a difference to me most companies that make stuff here in the states still have their materials sourced from other countries if you pay attention to some the stuff you buy now most of it says built in the usa using foreign materials.

my job requires me to use computers. So my materials are foreign, but my.job is here in the US.

mechanic81 · « **Reply #25 on:** August 26, 2016, 09:44:20 PM »

and as far as the post i put up i asked about trying brunswick the subject header didnt ask where are they made or anything about it if you use brunswick equipment feel free to answere the question and give me some feedback.

UpstateProShopChris · « **Reply #26 on:** August 27, 2016, 10:13:43 AM »

I second the Danger Zone or Fanatic ideas. The Danger Zone is a bit earlier and smoother than the fanatic. I find the Fanatic to be more useful when dealing with slower speeds like yours and playing closer to the friction.

ccrider · « **Reply #27 on:** August 28, 2016, 10:24:38 AM »

My specs are about the same as yours. If you go with a Danger Zone, for me it rolled earlier than I expected. Keep that in mind when laying it out.

I suggest trying a ball in the Mastermind series. If you can find an original Mastermind, you can not go wrong with it. It takes well to surface changes and is most predictable.

mechanic81 · « **Reply #28 on:** August 28, 2016, 10:55:16 AM »

im actually kinda surprised not too many suggestions on the melee jab.

coach big b · « **Reply #29 on:** September 07, 2016, 11:35:42 AM »

I like the two you picked. A nice one-two combo that allows you to plug others in when you're able to budget wise. The Zone would be my ball for fresh and when the lanes break down I would go with Jab. That was one of my favs for sometime. A very clean pearl that has great back end reaction when you need it.

Author Topic: want to try brunswick (Read 9680 times)

mechanic81

want to try brunswick

JPbowling151

Re: want to try brunswick

amyers2002

Re: want to try brunswick

JohnP

Re: want to try brunswick

AMF300bowler

Re: want to try brunswick

amyers2002

Re: want to try brunswick

2handedvolcano

Re: want to try brunswick

mike497

Re: want to try brunswick

mechanic81

Re: want to try brunswick

tkkshop

Re: want to try brunswick

mechanic81

Re: want to try brunswick

UpstateProShopChris

Re: want to try brunswick

ccrider

Re: want to try brunswick

mechanic81

Re: want to try brunswick

coach big b

Re: want to try brunswick