win a ball from Bowling.com

Author Topic: EPX T1  (Read 22664 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
EPX T1
« on: December 31, 1969, 06:00:00 PM »
After more than 8 years of research and testing, Columbia 300 is proud to announce Catalystâ„¢ coverstock, and the EPX T1 high performance ball using this breakthrough technology. The first major innovation in coverstock formulation since the advent of reactive resin. If you are on wet lane conditions and looking to play the inside track, ask your Pro about how you can get more friction, more boards and more strikes with Catalyst and the EPX T1.

Patent pending.
 
 Ball Specifications  
 Core Technology: Dense polymer core with top energy flip block in stabalizer core

Core Technology Benefits: A medium Rg of 2.53 and medium differential of .040 was chosen to complement the enhanced friction of the Catalyst coverstock.

Coverstock: Catalyst

Coverstock Benefit: Catalyst creates more friction in oil without sacrificing strong backend continuation.

Hardness: 75-78

ABC/WIBC Approved: Yes

Track Flare: 4-5

Color: Purple

Sanding Process: 500 girt cross hatch

Polish Name: 3M Rubbing Compound  
EPX T1 core

Hook Rating
Overall Hook: 70
Hook Oil: 40
Hook Dry: 30

 
 
 Dynamic Properties
Available Weights Radius of Gyration (Rg.) Rg. Differential
16 lb. 2.533  0.040
15 lb. 2.573  0.040
14 lb. 2.618  0.036

 

 

Teek

  • Newbie
  • *
  • Posts: 1
Re: EPX T1
« Reply #31 on: February 27, 2006, 06:20:41 PM »
R.I.P. to another EPX TI .

Not my ball , it was being thrown (bowled) by a person on
the team we were playing last night , ball was working "super" well
he was bowling down 4 or 5 board , ( stringing strikes ) while i
was looking for oil in the middle anyway back to the "ball"
it was late into the third game 8th frame i think .  i don't think
this can be blamed on COLD weather , it was warm , also it doesn't
"Snow" in Melbourne Australia,and the ball was smashing the pins
until one decided to " Bite Back " hit the pocket and left a pin or
two , can't remember which, when it came back there was a LARGE PIECE
MISSING ( about the size of 2 twenty cent peices , i think you call
them Quarters , and about 10 to 15 mm deep (half inch) )

so sadly its R.I.P. to another EPX TI . as the flag is lowered to
half mast to the tune of "another one bites the dust"

Shadowman

  • Newbie
  • *
  • Posts: 3
Re: EPX T1
« Reply #32 on: March 05, 2006, 05:44:21 PM »
THIS IS A FOLLOW UP FROM MY LAST REVIEW.IVE GOT ABOUT 15 GAMES ON MY EPX NOW AND I HAVEN'T SHOT LESS THEN 632 WITH IT.I DO KEEP IT CLEAN AFTER EACH DAY I PUT IT IN HOT WATER AND WIPE THE OIL OFF.SO FAR I LOVE THE BALL.GO TO CORPUS CRISTI IN TWO WEEKS WILL GIVE UPDATE ON HOW IT WORKED IN THE HEAVY OIL.

Storm8300

  • Jr. Member
  • **
  • Posts: 5
Re: EPX T1
« Reply #33 on: March 06, 2006, 07:23:59 PM »
I pesonally love the idea of the new coverstock with out particles,because particle balls die after a bunch of games compared to balls without particles. But i also think its a maintance thing also. Good Cover but just is sucks up oil more than a sponge could, then ball looses all its reaction after 3 games, but then i put it in the hot water bath with dawn, and then its brand new again. Thats the only good thing, and ready for heavy oil again until 3 more games, *Ball never comes out unless there is a lot of oil in my leauge or tournament i am bowling in. Cant wait for storm to come out with a new non reactive or non particle coverstock, that will truely be a sick ball.

Shadowman

  • Newbie
  • *
  • Posts: 3
Re: EPX T1
« Reply #34 on: March 22, 2006, 06:44:23 PM »
Well im back from Texas.I only threw 3 games with the epx and I had to leave family emergency at home and didn't do the doubles and singles.But the lanes were oiled just before our team event and this ball performed like a champ.Shot 620 with 5 opens.Could have shot better but like I said had other things on my mind.Im right handed stood at 15 board left side and took it out to the 1 & 2 board and was killing the pocket.Had 1 pocket 8-10 other than that the pins I left were because of me.When I hit the pocket the pins blew off the alley.Great Great Ball Love It.

Angelfire

  • Jr. Member
  • **
  • Posts: 18
Re: EPX T1
« Reply #35 on: April 22, 2006, 10:16:44 AM »
I wasn't sure at first if the EPX-T1 would be a good ball for me since it's very strong on the heavy oil lanes. But I tried it out this past week and I was very amazed by this ball. I have to ball drilled with the pin right of the right finger, about 4" from PAP (drilled in the mildly rev dominant pattern) for medium reaction.
First tried in on a condition where it was heavy but drier backends. Normally I throw the ball at my usual spot at about the 15-20 board right side, but ended up at the middle arrow throwing it deep to the 10 board. It drives smooth into the pocket, not like a flip/snap reaction of any kind. Even if I go high in the pocket, I would still produce a strike, but the pin reactions are off the hook! My only problem was that if I slow down on my speed a little, it slices through the pocket or goes brooklyn. Throwing it that way was a bit unconfortable for me, but I needed to find out how the ball reacts on different conditions.

Last night, on my final league night, the lanes were extremely oily and spreaded down all the way with alot of carrydown. That's when I threw the EPX on my normal lines, going in a straight path, and breaking well toward the end. The pin reactions there were much, much better and surprisingly, kept throwing that same line all night. It still keeps the pins low on impact, and it's very consistent as long as you're consistent as well.

I decided to make that ball first in my arsenal because I can control it alot better than my Xxxcel. It goes longer and rolls more smoothly in the pocket than the Xxxcel. I would recommend this ball to anyone who needs one for tournament games or for those really heavy oil patterns. I started throwing Columbia300 balls when I was 8, and so far, I'm glad I'm throwing them again.

http://www.youtube.com/watch?v=ho3JnJOX7AM
http://www.youtube.com/watch?v=135cXboY42I
http://www.youtube.com/watch?v=KnHNOfEzjU0 (video)

Average For 2006 Season: 208
Ball Style: Stroker
Ball Speed: 15-16 mph
Highest Game: 289(sanctioned), 300(unsanctioned)
Highest Series: 763


My Weapons of Mass Destruction:
Columbia 300- EPX-T1
Ebonite- Xxxcel
Ebonite- The One
Track- Xception
Revolution- Vengeance

You can give yourself 100% every night when you walk up to those lanes and throw that ball. But there is a part of you that can put yourself beyond that limitation, to an entirely new level. The question is this, can you handle going beyond your own potentials?

LeoAnalyn

  • Full Member
  • ***
  • Posts: 105
Re: EPX T1
« Reply #36 on: August 29, 2006, 08:38:06 PM »
I Bought it 2nd hand. Drilled Mildly REV Dominant with Strong Reaction.
I've only used this ball 2 times total of 8 games in a Sports shot. But I still have a mixed feelings about it. The First week it works on a flooded lane. It hooks compares to other heavy Oil ball. Then I decided to Deep it in the Hot water before the 2nd Week then the ball hits like a dart. I think I've just pushed the oil out close to the surface instead of totally draining it. Then Boiled it really really hot and drained the oil completely but Sport Shot ended and never played sport shot again. Damm! I'll sub next time just to try it.

Bluff

  • Hero Member
  • *****
  • Posts: 1011
Re: EPX T1
« Reply #37 on: October 02, 2006, 08:40:03 PM »
15lb Columbia EPX A-1
3 3/8 x 3 3/8
1/4 oz side weight after 4 holes put it.

This is the Most hooking ball I ever used! Only the Infinite One and Awsome Hook and SCB I have never try. This ball hook so much and dry the lane so fast I can't use it more than 6 frames. Last week this pair was fresh and alot of oil. This ball just turns like no other hooking ball that I have try. I throw 7 shoot on practice and 6 strike and a 8 pin. 1st game 277 with a 7 on 3 frame due to human error. I play from 10 all the way 25. one game max hehehehe wish there's more oil.


--------------------
stormy lane

mainzer

  • Hero Member
  • *****
  • Posts: 4405
Re: EPX T1
« Reply #38 on: November 20, 2006, 01:07:43 PM »
A BIGGER ONE,EVEN LARGER THAN INFINITE!

SPECS: pin is below and left of my fingers mass bias is out about 2 1/2 inches and the PAP is about about 4 1/2 inches. small balancing hole to give it a little length

THS: 38 Feet light outside and med-heavy volume in the middle roughly oil 10-10 dry the rest of the way to the ditch.
EPX eats this pattern for lunch. The ball gets down about 35 feet then you can see the ball get ready and go left not a hard turn but not a smooth turn just in the middle covers alot of boards in a hurry I gotta make sure I stand well left and throw well right I really don't need to aim a whole lot I just look left and the ball pretty much takes care of the rest of the shot for me. EPX hits like a bomb pins just fly back and messengers are coming from the sky and the pit and the parking lot again this balls angle and power pins don't have a chance. Normal Line was like this 15-20 at the arrows and where ever I pleased at the break point as long as it was right of 15

MOUNTAIN BAY MASTERS SHOT: I used this successfully the first couple of weeks in the league when we had very heavy oil. Shot was like this, Heavy juice all the way across the lane very little anywhere you put the ball out of bounds 7 and out to the gutter. 41-43 feet buff to 45 or a little more. I have bowled on easier SPORT Patterns!
Like I said only a couple of weeks of use for this ball and it tore the shot to threads it is an oil eater of a ball. I would release at 14 and throw out to 5 straight into the out of bounds area and the ball would just bath in the oil then hook like monster once again the same turn as previously mentioned above and the same hit. It was like the added oil didn't even affect the balls performance it was still a killer. Other than standing a little farther right on the approach no real change was needed.

PBA PATTERNS: I only used this ball on the heaviest patterns and the ball was more than I needed I was often very far inside with the shots trying to keep the ball in oil long enough it was just sick. A note to those who are throwing the BIG ONE on the same shot '' Don't whine cause my ball hooks and yours doesn't.'' Once again when ever I pulled the ball out that same hook and hit if it wasn't so good I might get sick of it.

OVERALL: EPX has and incredibly consistent has alot of hook more than most will need and enough hitting power to stop freight train in its tracks. I never really had to worry about over throwing the ball it would just hook harder when it turned toward the pocket Only thing I had to watch was throwing to slow then I would pick up the 7-pin with a full rack HOLY HOOK! I have never had a better oil ball I can always count on it to get the job done I can't wait until they do another one of these epoxy balls this thing rocks the house
--------------------
Mainzerpower
"No one runs...from the conquerer "

MainzerPower

Freakin10pin

  • Jr. Member
  • **
  • Posts: 24
Re: EPX T1
« Reply #39 on: December 05, 2006, 09:19:01 PM »
J U N K

'nuf said.  It's too bad since Columbia has put a lot of time and money into a failed effort.  I'd like to see them return to the days of Superflex and Flexel.  Those were some of the best rolling balls made.
--------------------
Righty
Speed: average 16.5 (Quibica)
Revs: med-high to high
Axis: 5-3/4" w/ 0' tilt ( hi-track )

another300

  • Hero Member
  • *****
  • Posts: 1672
Re: EPX T1
« Reply #40 on: May 24, 2007, 05:13:03 PM »
I wish I would have known about this ballreview site before I bought this ball late last year.  I have been a Columbia fan most of my bowling career and this ball has incouraged me to start looking at other Ball Manufacturers. This ball is too "high maintenance".  It started out ok the first few games then would die out.  Soaked it in hot water to get the oil out and tried again.  It rolled ok the first few frames but then died out again.  No technical terms or drilling info here, just that this ball was a waste of money and after only less than 10 games, it sits in my garage.
--------------------
"If you fail to try...you have already failed"

rhbowling07

  • Hero Member
  • *****
  • Posts: 918
Re: EPX T1
« Reply #41 on: October 26, 2007, 11:39:09 AM »
I have a 15lb epx with a 2 1/2" pin.  The ball is the best ball i have ever bowled with overall.  It has a whole lot of hook.  It starts midlane and keeps going.  Another plus about this ball is the pin action.  There are always pins flying everwhere when i throw this ball.  It reads the lane well and hooks in the pocket almost everytime but when it doesnt you still get a strike.  I love this ball.  I bought it used off of ebay. Once i got it, it was a deep purple because of all the oil in the ball.  I boiled the ball, a lot of people say not to but i believe if you boil it for only 10-15 minutes no cracking will occur.  Once i boiled the ball it made it look brand new and i do this after every 10 games or so.  Turn the stove on high and boil the water and once it is boiling, remove it from the stove and put it on the other eye and let it sit and place the ball in there for 10-15 minutes and once you remove just watch the oil wipe away.  It is amazing how it turns out.  This is the best ball ive ever bowled with it and i will continue to bowl w/it until nothing is left of it.

I bowl between 16-17mph with a lot of hand

My current arsenal:
Columbia Action Packed
Columbia Epx T1
Dynothane Anomaly
Ebonite Tidal Wave Wipeout
Storm Tropical Storm
Track Arsenal Angular
Track Sheer Havoc


Previous Balls i have owned:
Brunswick Fury
Columbia Action Attack
Ebonite V2 Sweet
Track Robo Rule


Balls Bowled with:
Columbia Action
Columbia Action Max
Dynothane Threshold
Ebonite Angular One
Ebonite Xcel Pearl
Ebonite Stinger 2 piece
Elite PBA Scorpion
Morich Awesome Hook
Storm Double Agent
Storm Hot Rod Super Sport
Solution Power Plus EX
Storm Trauma Response
Track Arsenal Artillery
Track Equation 2
Track Machine
Track Rule Delta
Track Xception