win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Columbia Cores?  (Read 3382 times)

Let It Bleed

  • Hero Member
  • *****
  • Posts: 534
Columbia Cores?
« on: February 20, 2006, 03:32:34 AM »
Out of curiosity, does anyone know if Columbia (or any of the companies attached) have released a ball in the past few years with the Cuda/C core?  The last one I know of was the Cuda/C 2000 (or at least that's what I read)  
Thanks!
--------------------
"Chicks dig the trip 4" -Randy Pederson
Logged

 

Mark T. Trgovac

  • Hero Member
  • *****
  • Posts: 1270
Re: Columbia Cores?
« Reply #1 on: February 20, 2006, 01:18:21 PM »
Hey the only core that is close to it is the ones used in the justice line by amf. They are almost the same just the adition of two slight longer flip blocks on top of the smaller one like a step.

http:// http://www.amf300.com/index.cfm?p=balls&bid=24

I think you will find it close to what you are looking for. Have fun.
--------------------
Mark "scoot" Trgovac
C-G Pro Shop
Unoffical "Spokesman"
Youngstown, Ohio

" A Track, you leave one on the ball why not leave one in the bag."

"The Revolution is coming. What side will you be on when the pins hit the pit."
Logged
Mark T. "Scoot" Trgovac
Track Staffer
Bowling Ball Driller

OG1

  • Full Member
  • ***
  • Posts: 200
Re: Columbia Cores?
« Reply #2 on: February 20, 2006, 03:47:31 PM »
don't think so have not seen any ceramicores in a while
--------------------
Did they run the oil machine?  Was there any oil in it.....
Logged

BOA_ELF

  • Sr. Member
  • ****
  • Posts: 259
Re: Columbia Cores?
« Reply #3 on: February 20, 2006, 06:35:15 PM »
only thing close is the titanium cores as they replaced the ceramicore


--------------------
Yes I am a Lefty
Good scores to all  Elliott
Arsenal:=Columbia-Action, U-turn Pearl,Super Trooper, Scout Reactive, White Dot
Highest series 718 done 4 weeks before shoulder surgery
Highest series after surgery to date: 682
Logged

OG1

  • Full Member
  • ***
  • Posts: 200
Re: Columbia Cores?
« Reply #4 on: February 20, 2006, 11:14:36 PM »
looking into it further they may not be legal anymore due to the change in the USBC changes the COR. Not sure of the exact number but I think they were very near the limit before the number was changed....

BOA_ELF
to the best of my knowledge the ceramicore and titanium cores are the same just another name.
--------------------
Did they run the oil machine?  Was there any oil in it.....
Logged

BOA_ELF

  • Sr. Member
  • ****
  • Posts: 259
Re: Columbia Cores?
« Reply #5 on: February 21, 2006, 01:06:26 AM »
As far as I know they are still legal as i know of several still being thrown in amateur tourneys around the northwest.  
As far as the ceramicore being the same they are just a hair different in shape. but appears very much the same the new ones are a ti/ ceramicore as the old ones did not have the titanium


--------------------
Yes I am a Lefty
Good scores to all  Elliott
Arsenal:=Columbia-Action, U-turn Pearl,Super Trooper, Scout Reactive, White Dot
Highest series 718 done 4 weeks before shoulder surgery
Highest series after surgery to date: 682
Logged

OG1

  • Full Member
  • ***
  • Posts: 200
Re: Columbia Cores?
« Reply #6 on: February 21, 2006, 09:12:43 AM »
quote:
As far as I know they are still legal as i know of several still being thrown in amateur tourneys around the northwest.  
As far as the ceramicore being the same they are just a hair different in shape. but appears very much the same the new ones are a ti/ ceramicore as the old ones did not have the titanium

what I mean by legal is to make new balls with the core.... I think any of the older ones would have been grandfathered in

Let It Bleed
after looking into it the Ti Beast Low RG is almost the same core inverted
--------------------
Did they run the oil machine?  Was there any oil in it.....
Logged

Let It Bleed

  • Hero Member
  • *****
  • Posts: 534
Re: Columbia Cores?
« Reply #7 on: February 21, 2006, 06:56:20 PM »
Hey everybody, thanks for the input so far
OG1, had a question though...
 
quote:
looking into it further they may not be legal anymore due to the change in the USBC changes the COR. Not sure of the exact number but I think they were very near the limit before the number was changed....

I was a bit confused by this, so if you could elaborate I would appreciate
Thanks Again!
--------------------
"Chicks dig the trip 4" -Randy Pederson
Logged

OG1

  • Full Member
  • ***
  • Posts: 200
Re: Columbia Cores?
« Reply #8 on: February 21, 2006, 09:55:32 PM »
quote:
Hey everybody, thanks for the input so far
OG1, had a question though...
 
quote:
looking into it further they may not be legal anymore due to the change in the USBC changes the COR. Not sure of the exact number but I think they were very near the limit before the number was changed....

I was a bit confused by this, so if you could elaborate I would appreciate
Thanks Again!

ok here is the situation
"COR(coefficient of restitution) is the transfer of energy from one object to another; in this case, from the bowling ball to the pin. This new bowling ball specification changed the upper limit from 0.78 to 0.75 and took effect March 15,2005."
whole story here:
http://www.bowl.com/articleView.aspx?i=10098&f=1
Ceramics are known to be one of the hardest materials in a bowling ball that do not absorb energy thus transfering alot to the pins. Making the ball hit harder. Look here to find out why ceramic cores were used:
http://www.bowlingindex.com/products/balls/ceramic.htm
--------------------
Did they run the oil machine?  Was there any oil in it.....
Logged

Let It Bleed

  • Hero Member
  • *****
  • Posts: 534
Re: Columbia Cores?
« Reply #9 on: February 21, 2006, 10:41:25 PM »
quote:
quote:
Hey everybody, thanks for the input so far
OG1, had a question though...
 
quote:
looking into it further they may not be legal anymore due to the change in the USBC changes the COR. Not sure of the exact number but I think they were very near the limit before the number was changed....

I was a bit confused by this, so if you could elaborate I would appreciate
Thanks Again!

ok here is the situation
"COR(coefficient of restitution) is the transfer of energy from one object to another; in this case, from the bowling ball to the pin. This new bowling ball specification changed the upper limit from 0.78 to 0.75 and took effect March 15,2005."
whole story here:
http://www.bowl.com/articleView.aspx?i=10098&f=1
Ceramics are known to be one of the hardest materials in a bowling ball that do not absorb energy thus transfering alot to the pins. Making the ball hit harder. Look here to find out why ceramic cores were used:
http://www.bowlingindex.com/products/balls/ceramic.htm

Very interesting read, definitely cleared things up for my simple minded methods ...thanks a bunch for the info!
--------------------
"Chicks dig the trip 4" -Randy Pederson
Logged
Pages: [1]
« previous next »