win a ball from Bowling.com

Author Topic: How you all clean your Action?  (Read 1434 times)

joe5080

  • Jr. Member
  • **
  • Posts: 7
How you all clean your Action?
« on: January 20, 2006, 10:38:32 PM »
I have a Action and it work very well for me. Its already 5 to 6 weeks i have been using it. I would like to know how you guys clean your Action. Cause i used Black Magi on it and the breakpoint is way too far for me. What should i do to may it look out of the box? I really like the way it hook out of box. Please give me ( Newbie ) a suggstion.

 

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: How you all clean your Action?
« Reply #1 on: January 21, 2006, 06:52:16 AM »
when people say "Black Magic", they usually mean the polish. If you do also, a polish is not a cleaner. small wonder you are getting too much length. Sorry to be harsh about this, but i suggest you not listen any longer to the person who recommended this to you. If you are not using the polish, then using the ball on oil, can impart a light sheen to the ball; with use, the original 1200 grit finish can get modified.  If that's the case, the ball should be sanded with 1200 grit sandpaper, every 25 - 40 games or so, depending on its use level. Indicators are lack of proper reaction or just the look of the ball.

Black Magic is made by Ultimate products; they have an excellent cleaner called Black Magic Rejuvenator. Since the action is a dull ball which can absorb oil like a sponge, it should be cleaned after every league session, BEFORE you put the ball back into the bag.

Stock finish is 1200 grit sanded; simply ask your pro shop to restore it to that texture with normal wet/dry silicon carbide sandpaper: 600 grit - 1000 grt, then 1200 grit paper. It should take 3 1/2 - 5 minutes and cost $10-15.
--------------------
"...for advice is a dangerous gift, even from the wise to the wise...."
J. R. R. Tolkien



Edited on 1/21/2006 7:43 AM
"None are so blind as those who will not see."

joe5080

  • Jr. Member
  • **
  • Posts: 7
Re: How you all clean your Action?
« Reply #2 on: January 21, 2006, 06:58:03 AM »
Thank you so much. I did use Black Magic but i only use very very little, but the result were very bad for me. Cause i saw someone polish his Action and it work very fine for him so i just give it a try. But now i think i will sand it back to 1200 grit. Thank you so mush for this Info.

strikeordie

  • Sr. Member
  • ****
  • Posts: 427
Re: How you all clean your Action?
« Reply #3 on: January 21, 2006, 09:29:48 AM »
I use ebonite energizer cleaner after every set. I put a medium coat of polish on it as well. This ball is amazing w/polish, out of box was too strong for my league.

joe5080

  • Jr. Member
  • **
  • Posts: 7
Re: How you all clean your Action?
« Reply #4 on: January 27, 2006, 05:06:28 AM »
What you guys think if i use CPR on this ball?

Joe Chan
The guy who only using Columbia's ball