Author Topic: Rival dying??? (Read 4328 times)

mrteach3 · « **on:** January 03, 2008, 10:42:02 AM »

Hey all,

I am not one to complain about "ball death." In fact, I truly believe that some over-exaggerate what really happens to their equipment. Usually, I even like when the balls "slow down." With that said, I hadn't drilled up anything Columbia for a long time, but thought the Rival suited my needs just fine. Drilled one up and it was exactly what I was looking for. Key word in the previous sentence is "was." At about 35 - 40 games, it truly has "died." Sanded it back to box finish, put it in a Rejuvenator, and still nothing even close to what it was in the beginning.

Question being is this a bad luck experience for me or is this happening to others as well.
--------------------
Who needs a 300 or 800, when I have a 294 and a 295!?!?!

tdub36tjt · « **Reply #1 on:** January 03, 2008, 07:13:20 PM »

Probably 70 games on mine, still like new.

CHawk15 · « **Reply #2 on:** January 03, 2008, 09:23:09 PM »

I just had mine baked and cleaned out in the pro shop today after it lost reaction. It still rolled in the midlane, just didn't turn on the back nearly as much. My friendly pro shop operator put it in the "bowling ball oven" for nearly an hour and then used some Power Wash (Powerhouse) to clean out the pores using a ball spinner, you wouldn't believe the amount of stuff that came out of that ball. It absorbs a lot more oil, grime, etc than I thought it did.

I haven't thrown it yet, but I will tommorrow night and I'll let you know how it turns out. I expect it'll be just fine. I've probaly put somewhere between 75-100 games on the ball before I noticed the loss in backend, but it's much more of an "Ebonite Sponge" than I expected.

Brian Green · « **Reply #3 on:** January 03, 2008, 10:03:23 PM »

I've got 200 plus games on my rival.... and this is the best All around ball i have thrown in at least 5 years.......

after about 50 games i noticed the ball to start to weaken a bit....... i hit it with the 4000 abralon pad and it worked for about 5 games...... after that i put the ball in the revivor oven........ and hit the ball with a grey scotch brite pad and then 4000 abralon.......... it still shined up a lil too fast for my liking......... my trick with this ball is after about every 15 games i hit the ball with 1000 grit wet sandpaper..... then use react-a-clean on it then hit the ball with a grey scotch brite pad... and the ball is as good as new...........

the rival does require a lil bit more care than most other balls but its so worth the time and effort to see this ball roll down the lane
--------------------
"USAbowlersmart.com - only the best Survive"

charlest · « **Reply #4 on:** January 03, 2008, 10:41:24 PM »

I wonder (really do not know) if these Ebonite-based coverstocks need the Hook Again process rather than any other process to "rejuvenate" them?

MrTeach3,

* Did you see or did the pro shop report how much oil was removed by the Rejuvenator oven?
* Was the ball sanded rough (320 - 400 grit) before it was processed?

I am really curious, as I was contemplating getting one of the newer Columbia/Track balls in the near future.

If the status of your ball does not change, it would certainly dampen my enthusiasm. I know you have "no axe to grind", one way of the other.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ

cmurder300 · « **Reply #5 on:** January 03, 2008, 10:57:35 PM »

In my proshop we see this quite often, make sure that before it is put into the revivior that it is taken to 400 grit to open pours of the ball. The revivior pads have to be changed religously or you not remove all the oil and if the ball is completely saturated, 2hrs at 150 degrees should do the trick. After that the ball should be placed in the haus machine for resurfacing for at least 15mins, this will help release any residue or oil left. At this point take the ball to the desired cover prep and you should be almost as good as new!!!

www.infinitevisionbowling.com
--------------------
UAW FOR LIFE

mrteach3 · « **Reply #6 on:** January 04, 2008, 12:37:25 PM »

Thanks for the replies guys. Working in a shop, I was the one who put it in the Rejuvenator. Yes, there was a lot of oil that came out of it. Just like the Columbias of old. I did indeed wetsand it before I put it in the Rejuvenator. That always seems to work best for us. I will keep this posted as I put it in the Rejuvenator again today and took the surface back to original again.
--------------------
Who needs a 300 or 800, when I have a 294 and a 295!?!?!

Steven · « **Reply #7 on:** January 04, 2008, 03:59:50 PM »

mrteach3: As an aside, what has been you experience with treating other Columbia balls in the revivor? I could be wrong but my understanding is that Columbia discourages the use of heat to extract oil. Sometimes it's hard to know what to believe anymore.
--------------------
"Sometimes, the best move is the one we don't make"

wulfpackbwlr · « **Reply #8 on:** January 04, 2008, 05:03:11 PM »

Unfortunately I would not be surprised if it was dying as there was a resurgence brought into my local shop after 3 weeks that had basically started going straight. Was saturated with oil. Of course this kid probably had already put about 100 games on it in that short amount of time. Ebonite makes some of the best equipment out right now. Would just be nice if they could find a way to make them last a little longer.
--------------------
NC State Bowling Team
http://www.ncsu.edu/stud_orgs/bowling/index.htm
email: wolfpackbowling@yahoo.com
Please contact if you attend NC State and want to bowl or want to make a donation to our broke team.:-)

86camaroman · « **Reply #9 on:** January 04, 2008, 05:13:17 PM »

I have said it before and I will say it again I have a total nv wich people also say dies quickly. Now it has about 600 games on it. I usually rejuvenate it every 50 games but got behind in doing so. It took 3 hours to get all the oil out this time then I sand with 1k 2k 4k and then powerhouse polish and it rolls just as good as new everytime.

CHawk15 · « **Reply #10 on:** January 04, 2008, 10:32:12 PM »

Got a chance to throw my Rival after it was put in the Revivor and Powerhouse Power Wash on a spinner to emulsify the oil with 1000 abralon pad. Ball was then taken back to 4000 abralon and "it's back". It rolls just like it did before. My friendly pro shop operator said to bring it in about once every 35-40 games in order to maintain it.

justdale · « **Reply #11 on:** January 04, 2008, 10:45:08 PM »

Have over 120 games on my Rival, no problems with it
--------------------
Dale Williams
Columbia 300 Utah Amateur Staff

mrteach3 · « **Reply #12 on:** January 05, 2008, 08:00:44 AM »

Hey guys, it is a little better after messing with it yesterday. Still not close to what it was in the beginning. Heck, my new Bash is only 2 and 2 straighter at this point.

Steven,
I know what you mean, but we have used our Rejuvenator with many Columbia balls and have had success with them.

Such is life guys. Time to find something else. Thanks again.

--------------------
Who needs a 300 or 800, when I have a 294 and a 295!?!?!

Author Topic: Rival dying??? (Read 4328 times)

mrteach3

Rival dying???

tdub36tjt

Re: Rival dying???

CHawk15

Re: Rival dying???

Brian Green

Re: Rival dying???

charlest

Re: Rival dying???

cmurder300

Re: Rival dying???

mrteach3

Re: Rival dying???

Steven

Re: Rival dying???

wulfpackbwlr

Re: Rival dying???

86camaroman

Re: Rival dying???

CHawk15

Re: Rival dying???

justdale

Re: Rival dying???

mrteach3

Re: Rival dying???