win a ball from Bowling.com
« previous next »
Pages: [1] 2

Author Topic: Why does my WD hook?  (Read 7144 times)

SpareK

  • Full Member
  • ***
  • Posts: 199
Why does my WD hook?
« on: April 27, 2008, 07:16:14 AM »
Bought a 15 lb.for my spare ball and the hand in the middle of my grip and it hooks at least two boards. Is this normal? Will I see a straighter reaction once it wears in? I don't have a lot of rev's or speed.
A>A
Logged

 

CoachJim

  • Hero Member
  • *****
  • Posts: 1044
Re: Why does my WD hook?
« Reply #1 on: April 27, 2008, 03:23:13 PM »
It used to be my strike ball 25 years ago. If it hooks it is because the lanes are dry and you put side rotation on it.
Logged

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Why does my WD hook?
« Reply #2 on: April 27, 2008, 03:24:52 PM »
Break the wrist back slightly...

REgards,

Luckylefty
PS mine hooks slightly also but just enough to graze paint off the 7 pin...(wobble wobble).
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..

Edited on 4/27/2008 3:25 PM
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Why does my WD hook?
« Reply #3 on: April 27, 2008, 03:24:52 PM »
Break the wrist back slightly...

REgards,

Luckylefty
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

NicholasE

  • Hero Member
  • *****
  • Posts: 1744
Re: Why does my WD hook?
« Reply #4 on: April 27, 2008, 03:29:50 PM »
Anything will hook if you throw it slow with a good amount of revs or if the lanes are dry. I have one that ive owned about 2.5 years ago and it got really dull and started hooking a little so i just polished now it slides no matter what just about.
--------------------
Throwing hambones since 2005.
www.myspace.com/nestes12
Logged

shelley

  • Hero Member
  • *****
  • Posts: 9655
Re: Why does my WD hook?
« Reply #5 on: April 27, 2008, 03:32:00 PM »
It hooks for the same reason every other ball hooks.  The combination of the lane conditions, the ball's surface prep, and bowler's release create friction between the ball and the lane.

A better question would be "What can I do to stop that from happening?".

SH
Logged

SpareK

  • Full Member
  • ***
  • Posts: 199
Re: Why does my WD hook?
« Reply #6 on: April 27, 2008, 03:43:56 PM »
Thanks, for the input. Shelley , besides breaKing my wrist and throwing the ball harder what other things can I try. Are some of the other manufactures spare ball covers more condusive to straighter ball roll?
A>A
Logged

RevZiLLa

  • Hero Member
  • *****
  • Posts: 611
Re: Why does my WD hook?
« Reply #7 on: April 27, 2008, 03:57:21 PM »
Polish it like a marble and then put RainX on it...the stuff for car windshields
--------------------
RevZ=======================  
\I/
Logged

shelley

  • Hero Member
  • *****
  • Posts: 9655
Re: Why does my WD hook?
« Reply #8 on: April 27, 2008, 04:15:15 PM »
quote:
Thanks, for the input. Shelley , besides breaKing my wrist and throwing the ball harder what other things can I try. Are some of the other manufactures spare ball covers more condusive to straighter ball roll?
A>A


As I said, lane conditions, surface prep, release.  You can't control the lane conditions, they are what they are.  You are looking for something besides release.  Guess what's left.  

There are several polishes out there that increase length and decrease backend (most typical polishes increase backend reaction), Track's Delayed Reaction and Legends Extended Length polish come to mind.  I can't remember if DR is available now under the Powerhouse brand, but your shop might have some around.  Add a coat of that on top of the stock polish and you'll see less reaction out of it.  It has a slip agent that helps reduce the friction created.

Maybe something like Turtle Wax or another wax-based polish.  Typically not recommended for bowling balls because they tend to ruin expensive reactive coverstocks but for a plastic ball that you want to straighten out, it's just what you're looking for.

SH
Logged

CHawk15

  • Hero Member
  • *****
  • Posts: 764
Re: Why does my WD hook?
« Reply #9 on: April 27, 2008, 05:13:34 PM »
I use Finesse It on my spare ball to straighten it out, but I can still hook it if I want to.
Logged

DanR

  • Sr. Member
  • ****
  • Posts: 396
Re: Why does my WD hook?
« Reply #10 on: April 27, 2008, 09:45:38 PM »
Keep the ball polished and try drilling the thumb deeper to add finger weight.  On drier syn. lanes the plastic balls will hook more then on wood lanes
Logged

tekneek

  • Hero Member
  • *****
  • Posts: 5657
Re: Why does my WD hook?
« Reply #11 on: April 27, 2008, 10:01:21 PM »
90% of poly or plastic balls are factory sanded on to a max of 600 wet sand, have your pro shop sand it to 2000 then apply a couple heavy coats of high gloss polish, that will straighten it out !!!!!
--------------------
Steve
Leading Edge Pro Shop
www.leadingedgeproshop.net
512-755-2947
 
http://stores.ebay.com/Leading-Edge-Pro-Shop


Logged
Steve
Leading Edge Pro Shop
Radical Bowling Technologies Advisory Staff
brinkley2223@yahoo.com
512-755-2947

themagician

  • Hero Member
  • *****
  • Posts: 2978
Re: Why does my WD hook?
« Reply #12 on: April 27, 2008, 10:25:30 PM »
My spare ball will hook if there is enough dry.

I have no issues though getting it to go straight on dry lanes, plastic is just so mild on our conditions nowadays in my experience that I have no issues with reaction, if I were to I would just be a little weaker on the lift, and as already stated break my wrist back and not lift just guide the ball to the target with my fingers.
--------------------
http://www.absolutebowling.com NO TROLLS
Logged
-Mike
-MOTIV Staff

Mark T. Trgovac

  • Hero Member
  • *****
  • Posts: 1270
Re: Why does my WD hook?
« Reply #13 on: April 28, 2008, 02:38:41 AM »
DR is still made under powerhouse. This is great stuff, and is one of the best length and reaction removing products. This was even before the buyout.

You dont always have to throw the ball harder to keep it from moving. Sometimes if you try to throw it harder you can end up hitting it more then you plan. I like to use a full roller release when I throw at single pin spares on the right side. This will get the ball into such a early roll you wont need to worry about backend reaction because once the ball is rolling it cant snap on the back, and if it does you know you are not letting it go full roller.
--------------------
Mark "scoot" Trgovac
C-G Pro Shop
Offical "Spokesman"
Youngstown, Ohio

Finishing THS book ave: 200
Finishing PBA Experence ave: 176
Finishing Composit ave: 194

Track HITMAN.

Tag Team Coaching Success Story.

When faced with a problem Chuck Norris asks himself, "What would The Scoot DO?"

Edited on 4/28/2008 2:44 AM
Logged
Mark T. "Scoot" Trgovac
Track Staffer
Bowling Ball Driller

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Why does my WD hook?
« Reply #14 on: April 28, 2008, 09:52:39 AM »
Finesse vs Finesse it?   Same thing?  Different?  If yes, how?
As far as change in reaction?

REgards,

Luckylefty
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..
Logged
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana
Pages: [1] 2
« previous next »