win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Abralon Pads  (Read 11684 times)

PowrKoil17

  • Full Member
  • ***
  • Posts: 196
  • HG: 265 HS: 659 HA: 172
Abralon Pads
« on: June 23, 2012, 11:31:52 AM »
I do all my surface prep by hand normally with wet sandpaper. Recently I purchased some Abralon pads and I would like to know if they need to be wet or dry when I use them.
Logged
My Arsenal                     Son's Arsenal (HG 267, HS 651, HA 177)
Black Hammer(Faball)    Red Zone
Ogre SS                          Mission 2.0
Dirty Look                      Evil Siege                      
Nexus                             C System 2.5
C System 2.5

 

BallReviews-Removed0385

  • Newbie
  • *
  • Posts: 0
Re: Abralon Pads
« Reply #1 on: June 23, 2012, 12:03:40 PM »

You can do either, but I personally prefer wet, especially for the lower grits (360, 500, 1000).
Logged

Hex017

  • Hero Member
  • *****
  • Posts: 974
Re: Abralon Pads
« Reply #2 on: June 23, 2012, 01:38:20 PM »
Is there a noticeable difference? I've always had prep done in my local pro shop on a spinner with the pads wet but am considering doing it by hand for tournament traveling, etc.
Logged

lefty50

  • Hero Member
  • *****
  • Posts: 1822
Re: Abralon Pads
« Reply #3 on: June 23, 2012, 03:07:19 PM »
I've had people tell me there is no difference, but I can only go with what I see and experience. There's a big difference (for me at least) between wet and dry. Dry has a lot more impact on surface, everytime I've compared....
Logged

BallReviews-Removed0385

  • Newbie
  • *
  • Posts: 0
Re: Abralon Pads
« Reply #4 on: June 23, 2012, 04:46:24 PM »
I agree with lefty. Using them dry will "cut" or impact the surface more.

Using the spinner with water flowing, the water will act as a lubricant somewhat so one can make the surface appear more uniform/smooth.

If your spinner doesn't have it's own water supply then spraying the ball frequently should also work. Not to mention keeping the "dust" from flying and you breathing it in.

Logged

Dave81644

  • Hero Member
  • *****
  • Posts: 1662
Re: Abralon Pads
« Reply #5 on: June 24, 2012, 11:24:46 AM »
Learned a new method from the boys in the EBONITE booth in BR (KYLE)

Use clean n dull on a pad and the surface on the ball will be fresh.
I do this every time now and its a very even, very clean surface

don't ever do dry anymore unless resurfacing
Logged

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Abralon Pads
« Reply #6 on: June 24, 2012, 08:02:02 PM »
Quote from: Dave81644 on June 24, 2012, 11:24:46 AM
Learned a new method from the boys in the EBONITE booth in BR (KYLE)

Use clean n dull on a pad and the surface on the ball will be fresh.
I do this every time now and its a very even, very clean surface

don't ever do dry anymore unless resurfacing

That kind of surprises me. I thought they would support more of the use of the Adrenaline Wipes.
Logged
"None are so blind as those who will not see."

Hex017

  • Hero Member
  • *****
  • Posts: 974
Re: Abralon Pads
« Reply #7 on: June 24, 2012, 09:15:20 PM »
Is this by hand or with a ball spinner? Actually sounds interesting...


Quote from: Dave81644 on June 24, 2012, 11:24:46 AM
Learned a new method from the boys in the EBONITE booth in BR (KYLE)

Use clean n dull on a pad and the surface on the ball will be fresh.
I do this every time now and its a very even, very clean surface

don't ever do dry anymore unless resurfacing
Logged

calired67

  • Jr. Member
  • **
  • Posts: 73
Re: Abralon Pads
« Reply #8 on: June 24, 2012, 10:52:25 PM »
I have used alcohol and a pad by hand for quite a while now. Never had a problem with uneven patterns.
Logged

adcwsdad

  • Jr. Member
  • **
  • Posts: 6
Re: Abralon Pads
« Reply #9 on: June 25, 2012, 04:57:58 AM »
  The only time I dry sand is at the lanes during practice and I want to change a balls reaction to better match up to the conditions/oil pattern.
   If you are trying to revive/resurface a "dead" ball or change a balls reaction, it doesn't take much sanding to have an effect. Wet sand. You don't have to remove much material from the balls surface. Dry sanding is aggressive.
   Check out www.polishyourball.com. They have tools designed for use with abralon and sia pads. I have a Pro unit in my bag to make adjustments at the lanes and use their BMS unit to resurface at home. These tools are fast,easy to use and I get more consistent results than by hand sanding.
 
 
Logged

Aloarjr810

  • Hero Member
  • *****
  • Posts: 2149
  • Alley Katz Strike!
Re: Abralon Pads
« Reply #10 on: June 25, 2012, 09:18:33 AM »
If you are just doing it by hand then using an Abralon pad dry usually isn't an issue, But if your on the spinner wet sanding is preferred.

Dry sanding
1-creates dust that you don't want to breathe.
2-the pads/paper won't last as long do to to it loading up
3-the pads/paper won't cut as accurately do to to it loading up.
4-depending on how you hold the pad/paper there's a heat issue do to the friction.


Logged
Aloarjr810
----------
Click For My Grip

Dave81644

  • Hero Member
  • *****
  • Posts: 1662
Re: Abralon Pads
« Reply #11 on: September 03, 2012, 12:25:16 PM »
Quote from: Hex017 on June 24, 2012, 09:15:20 PM
Is this by hand or with a ball spinner? Actually sounds interesting...


Quote from: Dave81644 on June 24, 2012, 11:24:46 AM
Learned a new method from the boys in the EBONITE booth in BR (KYLE)

Use clean n dull on a pad and the surface on the ball will be fresh.
I do this every time now and its a very even, very clean surface

don't ever do dry anymore unless resurfacing

Is on the spinner
works quite well

And yes, they did suggest the adrenaline wipes, not for use with spinner though
the AW are awesome, makes the ball squeaky clean
Logged

ccrider

  • Hero Member
  • *****
  • Posts: 2230
Re: Abralon Pads
« Reply #12 on: September 03, 2012, 12:43:50 PM »
Invest in a CAB.  You just need one. Whether using a spinner or hand you get more consistent pressure and a better end result.
Logged
Pages: [1]
« previous next »