BallReviews

General Category => Coverstock Preparation => Topic started by: BKloss on February 15, 2008, 12:30:15 AM

Title: Ball Spinners and Supplies???
Post by: BKloss on February 15, 2008, 12:30:15 AM
Looking to get a ball spinner, for those of you who have one or proshop guys...What would you recommend getting with it? (How many abralon pads, polishes, cleaners etc...)
Thanks for the help in advance.
--------------------

 
Title: Re: Ball Spinners and Supplies???
Post by: storm making it rain on February 15, 2008, 08:31:21 AM
iits just for you i would just get  one bottle of polish, one set of abralon pads, and a bottle of cleaner
Title: Re: Ball Spinners and Supplies???
Post by: OHBowler on February 15, 2008, 08:50:20 AM
I just got my spinner last week.  I went out to local walmart and got spray bottle, microfiber towel, and some 220 wet/dry sandpaper.  Yesterday ordered 2 4000, 2 2000, 2 1000 and 2 500 albralon pads.  Then ordered myself a 32 oz bottle of beans secret sauce.  We will see how it works!
--------------------
Good transactions with..
Juggernaut
10NDPIT
Title: Re: Ball Spinners and Supplies???
Post by: JohnP on February 15, 2008, 10:43:55 AM
For anyone using a spinner I recommend getting a Taxi Contour Abrasion Block.  It's almost impossible to sand a flat spot on a ball if you use one.  They have the hook portion of hook and loop, so they hold Abralon pads and Scotch-Brite very well.  A link to one site where you can buy them is below.  --  JohnP

 http://www.bowlingindex.com/proshop_tools
Title: Re: Ball Spinners and Supplies???
Post by: Brickguy221 on February 15, 2008, 03:38:08 PM
quote:
For anyone using a spinner I recommend getting a Taxi Contour Abrasion Block. It's almost impossible to sand a flat spot on a ball if you use one.


A Men to that John. I reccommend likewise.  
--------------------
"Whenever I feel the urge to exercise I lie down until the feeling passes away."

Brick
Title: Re: Ball Spinners and Supplies???
Post by: REvans284 on February 15, 2008, 04:46:26 PM
quote:
For anyone using a spinner I recommend getting a Taxi Contour Abrasion Block.  It's almost impossible to sand a flat spot on a ball if you use one.  They have the hook portion of hook and loop, so they hold Abralon pads and Scotch-Brite very well.  A link to one site where you can buy them is below.  --  JohnP

 http://www.bowlingindex.com/proshop_tools


I'll have to look into that.  It looks like a nifty tool.  

Also, I got a spinner not too long ago, I have 2 Sets of SB pads, and 2 sets of Abrolon Pads, and I don't have all that much in them (maybe $40-50 with shipping).

Thats 2 Burgondy (320 grit), 2 grey (800 grit) and green which you can get anywhere.  2 500 grit abrolon pads, 2 1000, 2 2000, 2 4000, and I got 2 360 as well.

After that I got 1 bottle of Power House Factory finish, and 1 bottle of L/LM Cleaner, and I'm set for a while for all I want to do.

Later,

REvans284