BallReviews

General Category => Coverstock Preparation => Topic started by: 1MechEng on May 15, 2008, 04:26:26 AM

Title: Cost of resurfacing at your local proshop?
Post by: 1MechEng on May 15, 2008, 04:26:26 AM
Just like the title of the post says:
How much to have a ball resurfaced to a different grit or polished up (not in a Lustre King! ) at your local pro-shop?
Just curious what the going rate is for this surface.
Thanks in advance for your input.
--------------------
======================
Dan
======================
Engineering * Bowling = a fun and practical application of rotational kinematics.

Bowling Nerd Herd (TM) Member
Title: Re: Cost of resurfacing at your local proshop?
Post by: mrbowlingnut on May 15, 2008, 12:27:50 PM
5 bucks or so
Title: Re: Cost of resurfacing at your local proshop?
Post by: pop_1 on May 15, 2008, 12:30:53 PM
for surface adjustments, its about $10.  Unless you bought the ball there and you are a good customer, then its usually free.  If your talking about the Haus reserfacing its about $30 or so.
Title: Re: Cost of resurfacing at your local proshop?
Post by: JMORRIS on May 15, 2008, 12:31:40 PM
Surface change / cleaning on the spinner = $4
Full resurface on the Haus Machine = $20-$30, depending on ball condition.
Title: Re: Cost of resurfacing at your local proshop?
Post by: BeansProShop on May 20, 2008, 03:21:52 PM
I charge $5 for surface changes.

$20 for Full Resurfaces including polish.

$5 for the Secret Sauce application...

Beans
--------------------
www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Lane#1 Ball Drilling Expert
Thanks for reading and be sure to check us out at the Lane#1 booth in Albuquerque. Check out current eBay auctions at:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=bowling_with_leah
Official Pro Shop of "ALL" F.O.S. Members!!!
Title: Re: Cost of resurfacing at your local proshop?
Post by: Grayson on May 20, 2008, 03:25:54 PM
10€ = 15$
(Germany)

--------------------
Sebastian Koch
"Have fun and bowl well!" - Grayson
"Some things are made so even idiots won't fail using them.... But I ask what about the genius?" - Grayson

(\_/)
(x_x)
c(')(')

Unoffical Ballreviews.com FAQ (http://"http://www.ballreviews.com/Forum/Replies.asp?TopicID=74110&ForumID=16&CategoryID=5")

Edited on 5/20/2008 3:26 PM
Title: Re: Cost of resurfacing at your local proshop?
Post by: Strapper_Squared on May 20, 2008, 03:33:34 PM
Surface changes are included with a purchase, or $3 for a ball brought it.  A full resurface (sand down to remove track/nicks/etc) and restore to desired grit runs $25.  Combine it with a rejuvenation for $40.

S^2
--------------------
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
“You can be with the guy and in his ear 24 hours a day, but at the end of the day you can’t be there the whole time.” (http://"http://www.dallascowboys.com/news.cfm?editorialAuthor=1&id=C011DC2A-B397-DB93-2A4AF1EDF4D7ABF9&page=2&endPoints=4351%2C8699%2C9240")
- Another Gem from Emmitt Smith 5-6-08
Title: Re: Cost of resurfacing at your local proshop?
Post by: sunsetlefty on May 21, 2008, 03:47:27 PM
^^^^^^^

I run a resurface and revive special for $40.00. I use a Cook's Sphere Machine and the Innovative Revivor Oven. Very popular package that works!


--------------------
Gary Palma
Owner of X-act Reaction pro shop at Ideal Lanes
PBA Member
2008 Hammer Pride Staff Member
Title: Re: Cost of resurfacing at your local proshop?
Post by: Lane1Redneck on May 23, 2008, 06:17:46 AM
The last time I had it done it cost me 40 bucks for a resurface job. Not no more though. Love my Vertex
--------------------
Looks Like a Telefunken U-47

Please don't drink and vote
YOU CAN'T AFFORD HER

F.O.S        
Great deals,and service  www.Shirts4Bowling.com

Jeff