win a ball from Bowling.com
« previous next »
Pages: [1] 2

Author Topic: Does anyone use a ball at 500 grit?  (Read 15117 times)

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Does anyone use a ball at 500 grit?
« on: March 10, 2015, 09:53:32 AM »
Or do most people think 500 grit is overkill? I keep my mastermind at 600 grit (green scotchbrite pad but close enough for this conversation) for use on the flood. I had to bring it out in practice Sunday night because my nightmare at 4,000 wasn't finishing well because of the oil, and the mastermind was amazing even at such a low grit
Logged

 

Gatekeeper

  • Jr. Member
  • **
  • Posts: 79
Re: Does anyone use a ball at 500 grit?
« Reply #1 on: March 10, 2015, 10:13:22 AM »
I'm bowling on Paris and typically use maroon scotchbrite on my Guru and GB2; amazing results.
Logged

Luvswatch

  • Hero Member
  • *****
  • Posts: 788
  • Hit em light and watch then fight!
Re: Does anyone use a ball at 500 grit?
« Reply #2 on: March 10, 2015, 10:20:23 AM »
The Burgandy Hammer is OOB at 500 grit. However, due to the embargo of lane oil in Chattanooga, I never see anything higher than medium.
Logged
RIP Sawbones and ThongPrincess

14# - Motiv
Jackal
Cruel Intent
Covert Revolt
Covert Vengeance
Primal Rage
GT1
Octane
Forza Redline
Forza
Sigma Sting
Venom Shock
Primal Impulse
Octane Burn
Tribal
Tag
Rebel Tank
Apex Ascent

14# EBI
Cyclone GB (private run)
Cyclone
Blue Hammer Urethene

themachine300

  • Hero Member
  • *****
  • Posts: 1410
Re: Does anyone use a ball at 500 grit?
« Reply #3 on: March 10, 2015, 10:37:59 AM »
500 grit is awesome for blending out the lane if their is enough oil in the front.  The pattern doesn't even have to be "flooded" just as long as the ball stores enough.  I've used 500 grit on 37-40 ft patterns before on hard synthetics when other bowlers are using less surface and I have a moderately high rev rate.
Logged
Philipp Hudak
Ebonite Amateur Staff
Bowl To Win!
#TeamEBI

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: Does anyone use a ball at 500 grit?
« Reply #4 on: March 10, 2015, 12:43:49 PM »
My two best nights have been throwing my mastermind. They are actually the two only nights I have thrown it. I am starting to think I need to get back to throwing control rather than angular
Logged

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: Does anyone use a ball at 500 grit?
« Reply #5 on: March 10, 2015, 12:58:40 PM »
Usually at least one of the guys on my pair during sweeper night.  ;D
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

LookingForALeftyWall

  • Hero Member
  • *****
  • Posts: 658
Re: Does anyone use a ball at 500 grit?
« Reply #6 on: March 10, 2015, 01:20:30 PM »
I use 500 grit for sport shots.

I would not use 500 grit on house shots.  I don't like blowing holes in the middle of the pattern with that much surface.  It forces me inside further (and quickly too) - which is not something I like doing all that much since I lose carry.
Logged

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: Does anyone use a ball at 500 grit?
« Reply #7 on: March 10, 2015, 01:33:04 PM »
I use to never throw polished equipment because I liked control. Then I started using higher grits and polish to keep the lanes from getting chewed up. Now My average is lower because I haven't been able to adjust well
Logged

jruffolo

  • Jr. Member
  • **
  • Posts: 24
Re: Does anyone use a ball at 500 grit?
« Reply #8 on: March 10, 2015, 01:38:53 PM »
I use my Piranha at 500 grit for light/dry conditions.
Logged

LookingForALeftyWall

  • Hero Member
  • *****
  • Posts: 658
Re: Does anyone use a ball at 500 grit?
« Reply #9 on: March 10, 2015, 01:52:36 PM »
Quote from: lilpossum1 on March 10, 2015, 01:33:04 PM
I use to never throw polished equipment because I liked control. Then I started using higher grits and polish to keep the lanes from getting chewed up. Now My average is lower because I haven't been able to adjust well

If 500 grit works for you on a house shot - go for it, use it.  It's a personal preference and if it works for you, awesome.  For myself personally, I've done it a few times and usually the night didn't end so well.
Logged

2handedrook12

  • Hero Member
  • *****
  • Posts: 1702
  • Be yourself and keep it simple.
Re: Does anyone use a ball at 500 grit?
« Reply #10 on: March 10, 2015, 04:09:15 PM »
I do. I have it on my Shout (agressive layout with double thumb) and a Scream (weaker layout )
On aggressive equipment, I would only be able to use it on heavier oil.
Logged
League: Pitch Purple, Destiny Magenta
Testing: MVP
Interests: Black Widow, Proof Solid, Idol Pearl

hammajangs

  • Full Member
  • ***
  • Posts: 206
Re: Does anyone use a ball at 500 grit?
« Reply #11 on: March 10, 2015, 06:04:29 PM »
A friend of mines uses a Lights Out at 500 abralon, no polish, sport shot, old wood. He throws it a lot slower but he loves the reaction he gets.
Logged

lilpossum1

  • Hero Member
  • *****
  • Posts: 1019
Re: Does anyone use a ball at 500 grit?
« Reply #12 on: March 10, 2015, 06:16:10 PM »
I don't mean use 500 on every ball every night. It just happened to be what I needed on Sunday. This Sunday, I may on the opposite end of the spectrum throwing urethane. I just mean in general, I may go back to using a little surface like 2,000 or 4,000 on my benchmark ball
Logged

tommyboy74

  • Hero Member
  • *****
  • Posts: 1833
Re: Does anyone use a ball at 500 grit?
« Reply #13 on: March 10, 2015, 06:24:25 PM »
I've done it a couple of times on sport/tournament patterns when I needed my Rogue Cell and Defiant to read earlier and blend out heavy volume.  I was able to score well.  However, it's not something I would normally use on THS.
Logged
Current Ball Arsenal
Heavy:
MOTIV Jackal Legacy
MOTIV Mythic Jackal

Med-Heavy:
MOTIV Trident Odyssey
MOTIV Forge Fire
MOTIV Covert Revolt

Medium:
MOTIV VIP ExJ Sigma
MOTIV Sigma Sting
MOTIV Pride Solid

Medium-Light
MOTIV Venom Shock
MOTIV Tribal Fire

ccrider

  • Hero Member
  • *****
  • Posts: 2230
Re: Does anyone use a ball at 500 grit?
« Reply #14 on: March 10, 2015, 09:39:40 PM »
Never on a THS. However, when our house shot plays fresh up front, I use a Mastermind drilled strong at 500/1000 no polish for the first game to game and a half and it is killer- the definition of control plus great carry.
Logged
Pages: [1] 2
« previous next »