BallReviews

General Category => Coverstock Preparation => Topic started by: TheMan14 on October 03, 2007, 03:10:01 PM

Title: Homemade ball spinner
Post by: TheMan14 on October 03, 2007, 03:10:01 PM
I was wondering if anyone has ever tried making their own ball spinner at home.  If so could you explain how you did this.
--------------------
http://members.bowl.com/FindAMember/Default.aspx

Arsenal:
15# Ebonite Xxxcel
15# Track Animal
14# Columbia Scout/R (spare ball)
Title: Re: Homemade ball spinner
Post by: dizzyfugu on October 04, 2007, 05:18:11 AM
Here's my device, made form a foaldable work bench and a Bosch 1.6hp power drill:

http://www.putfile.com/dizzyfugu/images/58550

We had this discussion a while ago, and someone even built a spinner from a fruit press. You might use the search function...
--------------------
DizzyFugu (http://"http://www.putfile.com/dizzyfugu/") - Reporting from Germany

Confused by bowling?
Check out BR.com's vault of wisdom:  the unofficial FAQ section (http://"http://www.ballreviews.com/Forum/Replies.asp?TopicID=74110&ForumID=16&CategoryID=5")
Title: Re: Homemade ball spinner
Post by: Skizriz on October 04, 2007, 06:02:09 PM
Whatever you do, never try to bolt a Tupperware bowl onto the top of the washing machine drum, stick a screwdriver in the safety latch, and turn it onto spin cycle.

Not that I am stupid enough to try it, but I imagine this is what would probably happen.

 It would start spinning perfectly, nice and smooth up to full speed, then as you stood there and watched in amazement thinking how smart you are, it would then come off balance.  Throwing your 14lb Roto-Grip Saturn (just a random named ball I chose to say) into the raised door enough to bend it to the point it won't close.

 Then your wife would probably come down to see what the racket was. After that I figure she would call you an idiot, and tell you that you better fix the door on her washing machine.

Wonder if anybody has ever been dumb enough to try something like that ???
--------------------
Roto Grip Saturn

 Roto Grip Spare Tire

Edited on 10/4/2007 6:04 PM
Title: Re: Homemade ball spinner
Post by: dicnic on October 04, 2007, 08:15:41 PM
Your story sounds about as believable as O.J.'s book, titled "If I did it.....".

The theory is fine but you would be better off finding a discarded washing machine in the dump and reusing its motor.

LOL !!!
--------------------
Never take a sleeping pill and a laxative on the same night.
Title: Re: Homemade ball spinner
Post by: scooter19530 on October 11, 2007, 08:18:45 AM
i actually made one out of a treadmill motor. i took the front part of a treadmill where the motor is and cut it off the frame. then i took the motor with the flywheel still attached to part of the frame and mounted that onto a floor cabinet with the flywheel upright. disconnected the front control panel and reattached downstairs in the garage.drilled 3 holes in the flywheel which is cast iron and attached a thick flower pot to it with screws. it's got a 2.5 hp motor that will do 8 mph. i can control the speed with the front panel and bring up the speed slow as i want. this sucker will fly. i tested it after i put it together and had it going so fast, the finger inserts fly out and all the way across the garage. it is great for putting ruff buff and polish on the ball because you can really get the heat in it. great for cleaning too. oh yea, i forgot, we never used the treadmill anyways so it cost about $4.00 for the flower pot and 2 bucks for the mounting brackets and screws. i even put the cover back on the motor to protect it from the dirt. i live in south bend indiana so i am kinda worried about how it will hold up in the winter. i wish i had room in the basement but no such luck. if you want pics, feel free to send your e-mail, it's really pretty cool.
Title: Re: Homemade ball spinner
Post by: legend4life95 on October 11, 2007, 11:07:07 AM
quote:
Whatever you do, never try to bolt a Tupperware bowl onto the top of the washing machine drum, stick a screwdriver in the safety latch, and turn it onto spin cycle.

Not that I am stupid enough to try it, but I imagine this is what would probably happen.

 It would start spinning perfectly, nice and smooth up to full speed, then as you stood there and watched in amazement thinking how smart you are, it would then come off balance.  Throwing your 14lb Roto-Grip Saturn (just a random named ball I chose to say) into the raised door enough to bend it to the point it won't close.

 Then your wife would probably come down to see what the racket was. After that I figure she would call you an idiot, and tell you that you better fix the door on her washing machine.

Wonder if anybody has ever been dumb enough to try something like that ???
--------------------
Roto Grip Saturn

 Roto Grip Spare Tire

Edited on 10/4/2007 6:04 PM




ROFLMAO!!
--------------------


****Kids in the back seat cause accidents; accidents in the back seat cause kids.****
Title: Re: Homemade ball spinner
Post by: I Hate Bowling on October 17, 2007, 10:02:15 AM
Anyone ever try mounting a spindle on a garbage disposal?
it seems like it would be so easy - right in the sink - water, drainage, everything.  Just need a mount of some sort, and a way to attach the spindle to the blades.
Title: Re: Homemade ball spinner
Post by: JohnP on October 17, 2007, 10:50:59 AM
And a way to slow the motor down.  That's why most spinners are belt driven instead of direct drive.  --  JohnP