win a ball from Bowling.com

Author Topic: Valentino's Resurrection  (Read 1476 times)

NY Mike

  • Hero Member
  • *****
  • Posts: 532
Valentino's Resurrection
« on: June 29, 2009, 02:53:36 AM »
Good day, quick inquiry concerning the "Resurrection" product.   Is this safe to use as a regular cleaner after league or as a periodic ball maintenance product.  Thanks.

 

ValentinoBowling

  • Hero Member
  • *****
  • Posts: 801
Re: Valentino's Resurrection
« Reply #1 on: June 29, 2009, 12:44:13 PM »
It's a cross-between a regular cleaner and periodic maintenance. Resurrection contains an abrasive which sands the ball to 800 grit. The abrasive removes a very small amount of coverstock, so unlike sandpaper, you can use Resurrection after every set.

We recommend using it about every 10 games. Also, since the abrasive particles stay in the towel after about 10 applications you can just wet the rag and you'll be good.

-Kevin
--------------------
www.ValentinoBowling.com
makers of Snake Oil, Remedy RX, Resurrection & UFO
Premium Maintenance Products


Edited on 6/29/2009 12:45 PM

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Valentino's Resurrection
« Reply #2 on: June 29, 2009, 01:06:32 PM »
This might be perfectly obvious but sometimes it's better to state the obvious than to skip over it -

If the surface created by Resurrection is the surface you use on that ball, then, yes, I see no problem with using it. But if your surface is anything other than 800 grit (with a light shine, if used with a spinner), then you're better off using a plain celaner after each set OR you'd have to put back whatever surface you were using on that ball.
--------------------
"None are so blind as those who will not see."

Edited on 6/29/2009 1:07 PM
"None are so blind as those who will not see."

NY Mike

  • Hero Member
  • *****
  • Posts: 532
Re: Valentino's Resurrection
« Reply #3 on: June 29, 2009, 01:25:59 PM »
Thank you..  I used it for the first time on my Dimension which had the original box finish.  Followup question, then >  Dimension had a 2000 OOB finish, what type of polish should I have used to bring it back to original
surface ?