win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Non-Abrasive Polishes  (Read 4863 times)

n00dlejester

  • Hero Member
  • *****
  • Posts: 3354
  • The Dude Abides
Non-Abrasive Polishes
« on: June 29, 2008, 11:48:24 PM »
Well, now that I've had some experience in the realm of abrasive polishes, I think it's time to venture into the land of non-abrasive polishes.  From what I gather, all they do is shine up a ball and create length and possibly decrease the overall reaction.  Is this accurate?  What are your experiences with such polishes?  

Also, what are your favorites?  I've heard that the Lanemaster's Factory Finish and Brunswick's High Gloss polishes are good.  

Thanks!
Steve
--------------------
Obviously, you aren''t a golfer.
Check out this blog
Logged
"This is not 'Nam. This is bowling. There are rules."

 

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7606
Re: Non-Abrasive Polishes
« Reply #1 on: June 30, 2008, 07:53:49 AM »
I am not 100% sold on the diea that Brunswick's High Gloss Polish is truly abrasive-free. I just freshed up my Renegade's surface last weekend, and when I applied the big B stuff, the cotton cloth became as green as the ball's coverstock. This happened on other balls, too (e. g. Reaction Rip, Shock & Awe), and just looks like some fine compound is included. If you put the stuff between your fingers, you can feel the fine gritty stuff. But much finer than 3M's Finesse-It II.

Not sure on the Lanemasters polish, never had the chance to use it so far.
--------------------
DizzyFugu - Reporting from Germany

Confused by bowling?
Check out BR.com's vault of wisdom: the unofficial FAQ section
Secrets revealed: What's a fugu?
Logged
DizzyFugu ~ Reporting from Germany

Greg T

  • Hero Member
  • *****
  • Posts: 19916
  • Collateral Damage
Re: Non-Abrasive Polishes
« Reply #2 on: June 30, 2008, 08:00:48 AM »

  You have to understand what happens to a surface when shined. You basically have two choices. You can "coat" the surface with a substance that fills in the tiny valleys and "levels" the surface, OR. you can remove the peaks from the surface to bring them down to the levels of the valleys. Now, I dont know about you, but I am not going to cover the actual coverstock of my ball with a foreign substance 9wax or polymer). I will use a 3000 grit or a 5000 grit to actually polish the ball surface. If a polish mfg says their product is abrasive free, then they are waxing your balls. Period.



Logged
AllBowling.com Off-Ramp!           

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Non-Abrasive Polishes
« Reply #3 on: June 30, 2008, 11:33:38 AM »
quote:
Well, now that I've had some experience in the realm of abrasive polishes, I think it's time to venture into the land of non-abrasive polishes.  From what I gather, all they do is shine up a ball and create length and possibly decrease the overall reaction.  Is this accurate?  What are your experiences with such polishes?  

Also, what are your favorites?  I've heard that the Lanemaster's Factory Finish and Brunswick's High Gloss polishes are good.  

Thanks!
Steve
--------------------
Obviously, you aren''t a golfer.
Check out this blog


They most definitely do not decrease the overall reaction. In fact, no non-abrasive polish, in my experience so far, has ever decreased total reaction. However, abrasive polishes have, solely because you can apply too much of them and press too hard and affect the the final greit level too much.

There are "polishes" designed to decrease the backend reaction, like Delayed Reaction and COntrol-It, but they may be considered a 3rd class of polishes.

Non-abrasive polishes differ in the ease and amount of polish they add and how much length they add per degree of shine. YOu'll have to see for yourself once you try them.

The main ones I use are Brunswick's High Gloss polish, Legends Factory Finish polish, and now, Valentino's Snake Oil.

The main factor I like about them is that they do not change the underlying grit or sanding level on the ball. They ONLY add length. SO you always know what you have. That is one of the concerns I have with abrasive polishes: the grit or sanding level is a complete unknown and is actually different every time you re-do or even adjust the ball. But, to be 100% honest, so is every polish you put on a ball. You depend on your memory of looks and feel to do the same thing every time. Since we're not robots ... We do the best we can.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ

Edited on 6/30/2008 3:42 PM
Logged
"None are so blind as those who will not see."

Brickguy221

  • Hero Member
  • *****
  • Posts: 9918
Re: Non-Abrasive Polishes
« Reply #4 on: June 30, 2008, 12:02:42 PM »
quote:
The main ones I use are Brunswick's High Gloss polish, Legends Factory Finish polish, and now, Valentino's Snake Oil.



I'm with Charlest on the Brunswick's High Gloss polish and Legends Factory Finish polish, plus I also use 3M Finesse-It II some. I am testing the Valentino's Snake Oil this week. Just finished doing an AMF Heist with Resurrection a bit ago and then put on a light coat of Snake Oil.
--------------------
"Whenever I feel the urge to exercise I lie down until the feeling passes away."

Brick

Edited on 6/30/2008 12:03 PM
Logged
"Whenever I feel the urge to exercise I lie down until the feeling passes away"

BeansProShop

  • Hero Member
  • *****
  • Posts: 3144
Re: Non-Abrasive Polishes
« Reply #5 on: June 30, 2008, 03:22:49 PM »
There is a great non abrasive polish that is relatively unknown. It also smells great. It is not produced by a bowling manufacturer so it is hard to get. I do have some if anyone wants to try it. Message me for prices.  Thanks BEans
--------------------
www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Lane#1 Ball Drilling Expert
Thanks for reading and be sure to check us out at the Lane#1 booth in Albuquerque. Check out current eBay auctions at:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=bowling_with_leah
Official Pro Shop of "ALL" F.O.S. Members!!!
Logged
Looking for a great place to sell your bowling equipment?? Auction style,Fixed Price and FREE For A Limited Time! Try www.bestintheworldauctions.com and to Purchase The "Secret Sauce" visit www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Pro Shop Own

n00dlejester

  • Hero Member
  • *****
  • Posts: 3354
  • The Dude Abides
Re: Non-Abrasive Polishes
« Reply #6 on: June 30, 2008, 08:47:31 PM »
quote:
There is a great non abrasive polish that is relatively unknown. It also smells great. It is not produced by a bowling manufacturer so it is hard to get. I do have some if anyone wants to try it. Message me for prices.  Thanks BEans
--------------------
www.beansproshop.com
--------------------
Thomas "Beans" Biniek Jr.
PBA Member and Lane#1 Ball Drilling Expert
Thanks for reading and be sure to check us out at the Lane#1 booth in Albuquerque. Check out current eBay auctions at:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=bowling_with_leah
Official Pro Shop of "ALL" F.O.S. Members!!!


Now that's some seriously awesome marketing.  Bravo!
--------------------
Obviously, you aren't a golfer.
Check out this blog
Logged
"This is not 'Nam. This is bowling. There are rules."
Pages: [1]
« previous next »