Post by: StormRoto on January 21, 2004, 12:16:17 AM
Post by: Brickguy221 on January 21, 2004, 11:04:41 PM
Post by: charlest on January 22, 2004, 05:01:40 AM
On any other, use whatever bowling polish you like.
--------------------
"Just because you can do something does not mean you should do it."
Post by: charlest on January 22, 2004, 09:16:22 AM
quote:
Where can you purchase trizact polish? I've never seen that advertised anywhere, but would like to try it on my Lane 1 equipment. Thanks.
Karl
Sorry about that. It's as Bob Hylka says, a type of sandpaper, not a polish, but use the white cerium oxide pad on a Brunswick particle pearl and it will shine as much as that cover can shine.
There may be a debate on the hype, but I have used it on them for years, since I learned about it, there is nodoubt at all about how well they work. Siggnficantly, and I mean SIGNIFICANTLY BETTER than any polish or sandpaper.
You need a spinner and the holder, a TAXI CAB.
See http://www.bowlersdiscountsales.com/store/page32.html
OR
http://www.innovativebowling.com/orderform.htm
--------------------
"Just because you can do something does not mean you should do it."
Post by: Tex on January 22, 2004, 10:20:09 PM
Post by: Brickguy221 on January 22, 2004, 11:13:40 PM
--------------------------------------------------------------------
Bob, I have a couple of questions on your above quote:
1. What does Brunswick recommend for sanding their particle covers after the Raging Inferno and Warp Zone?
2. Wouldn't the Golden Nugget be after? (gee, I hate to buy more sanding equipment just to sand my Golden Nugget when it is ready for snding)
Post by: charlest on January 23, 2004, 08:46:37 AM
quote:
Thread Hijack Alertquote:
use the white cerium oxide pad on a Brunswick particle pearl and it will shine as much as that cover can shine.
charlest,
Have you ever put a coat of any polish above a cerium oxide finished ball? If so, how did it affect the reaction?
Just wondering.
Hijack over!!!
--------------------
Proud owner of a 296 game....in no-tap!
Nope, never tried it. You see I experimented til almost Kingdom Come (not an understatement!) with an Imperial Quantum - sanding and every polish I had, with a spinner. Both processes made hardly any difference at all. I gave up and sold it. Then I got a Pro Purple and a Riot Zone and Trizact. The 4 different pads made THE WORLD of difference. If you need more length after a white Cerium oxide pad, then you need a different ball, probably a resin pearl.
YMMV
--------------------
"Just because you can do something does not mean you should do it."
"No good deed goes unpunished."
Post by: Pat Patterson on January 27, 2004, 09:44:39 AM
--------------------
Pat Patterson
Post by: LuckyLefty on January 27, 2004, 01:34:12 PM
I had used lessor sandpapers on Brunswick medium balls.
For example 1000 on a Pro Zone Violet and it would keep going and going and going. Then all of a sudden it would die! I would then Trizact to 5 or 10 micron(stronger than cerium) weaker than 15 and 35.
It would be like brand new! Had it for 4 years, died and was revived 3 times. Still hookin when I sold it! I was always a believer in the Trizact as being something different and better.
Now when not available I always use scotch brite. If ball died from Brunswick
I would go back and Trizact.
REgards,
Luckylefty