win a ball from Bowling.com

Author Topic: Question for Charlest  (Read 7311 times)

Uncle Meat PT 2

  • Jr. Member
  • **
  • Posts: 81
Question for Charlest
« on: February 06, 2017, 11:22:17 AM »
Having read some earlier posts about polishes with extenders; Val UFO,Storm Xtra, etc and was wanting get your opinion if Ufo is better or same or lesser than Xtra, or the other extenders out there.
I can get Xtra at my local, but is Ufo the better product?
Thanks,Roberto
Uncle Meat says: Maka da way fo da Iron Schaischige (spoken in fluent Jersey Italian)

 

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Question for Charlest
« Reply #1 on: February 06, 2017, 11:45:37 AM »
UFO is a different product. You've gotten 2 different classes of polishes mixed up.
Xtra Shine is what's considered an extender polish. One can define an Extender as a polish that uses finer grit levels of their micro-abrasives than a regular polish like Reacta Shine.

UFO is called a slip agent polish. There aren't many of them. Others that I know of are Neo-Tac's Control-It and Powerhouse's (used to be Track's) Delayed Reaction. These contain "something" that clogs the pores of reactive resin coverstock, reducing their ability to absorb oil. This ability is most of what makes them hook. So balls with this polish applied will go longer but unlike regular and extender polishes, this also makes them hook LESS and have less backend. That something in Control-It and Delayed Reaction, is, I believe, silicone; once applied it is there for good OR until you sand it off with a fairly rough pad, like 500 grit. UFO is different in that it uses an organic agent (I don't know what it is exactly) to clog the pores. It last about 20 - 25 games and can be removed much more easily, like with a 4000 grit pad.

All of these will polish a ball. I have used UFO, Control-It and Delayed Reaction at times, but I tend to stay away from such compounds that affect my carry power. That's just me; that may do what you need. I would only apply them to balls that are already very weak (Tropical Storm, for instance) when conditions get really dry and you'd rather not go to a urethane.

Xtra Shine is one of my favorite polishes of all time. You can use it like any other polish and vary the results from 2 directions: the underlying grit level and the amount of polish you apply.

Hope this helps. If I can be of any further assistance, please just ask. If I haven't answered your question well enough, I'll be happy to add more, if I can.
« Last Edit: February 06, 2017, 11:47:44 AM by charlest »
"None are so blind as those who will not see."

xrayjay

  • Hero Member
  • *****
  • Posts: 2686
Re: Question for Charlest
« Reply #2 on: February 06, 2017, 12:42:18 PM »
I've used UFO a lot at one point, actually for two seasons. I used it on my spare ball and on a reactive resin ball which it became a great second shift ball for me. But like what charlest had mentioned, I had to reapply it every month or 20 some games. I just go tired of doing it, but you can apply it without a spinner..... I switched to another ball and I'm using Snake oil.

UFO doesn't smell that bad too.
Does a round object have sides? I say yes, pizza has triangles..

aka addik since 2003

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Question for Charlest
« Reply #3 on: February 06, 2017, 01:58:09 PM »
UFO doesn't help a plastic ball except as a polish. When used on a plastic, its effect is the same as any other polish.
"None are so blind as those who will not see."

Bowlaholic

  • Hero Member
  • *****
  • Posts: 711
Re: Question for Charlest
« Reply #4 on: February 06, 2017, 02:58:38 PM »
Control It, Delayed Reaction (silicone based?) and UFO (organic agent?) all apparently clog the balls pours to do what they do.  Would the "polish" in the machines found in bowling centers which have been reported to be waxed based (?) and clog the balls pours be in the same classification (meaning they all clog the pours) as the products mentioned above? 

xrayjay

  • Hero Member
  • *****
  • Posts: 2686
Re: Question for Charlest
« Reply #5 on: February 06, 2017, 02:59:58 PM »
UFO doesn't help a plastic ball except as a polish. When used on a plastic, its effect is the same as any other polish.

My spare (w/core) hooks on dry and is tracked, the UFO helps hide it. Was I wasting good polish on my spare? I should used left over secrets sause since I don't use it.
Does a round object have sides? I say yes, pizza has triangles..

aka addik since 2003

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Question for Charlest
« Reply #6 on: February 06, 2017, 03:08:37 PM »
UFO doesn't help a plastic ball except as a polish. When used on a plastic, its effect is the same as any other polish.

My spare (w/core) hooks on dry and is tracked, the UFO helps hide it. Was I wasting good polish on my spare? I should used left over secrets sause since I don't use it.

Unless you have extra to spare, yes, it is a waste. You should use any plain polish on a spare ball. If it's tracked, a quick resurface does a WORLD of good for spare balls. I take mine from 500 grit (180 to 360 if it's really bad) to 1000 to 2000 to 4000 at a minimum; then a heavy dose of almost any decent polish.

(When I had a Blue Dot, I took the 4000 to a White Trizact level [6000 - 8000 range] and then applied a very fine polish. )
"None are so blind as those who will not see."

Uncle Meat PT 2

  • Jr. Member
  • **
  • Posts: 81
Re: Question for Charlest
« Reply #7 on: February 06, 2017, 03:37:33 PM »
Thanks for clarifying that for me, I meant ufo and the like had slip agents. I posted this hastily and forgot the facts....
Anyway,I have a good pearl,purchased a used Wisdom and drilled it up weak,and had my driller put it on the haus machine,but apparently it was still too strong for what I wanted to accomplish,knowing I was gonna be on a known dry set at my lanes. I had been wanting a weaker ball just for this but it's back to square one,unfortunatly.
Probably gonna score the ufo and have it to where the wisdom will cover a few boards and I can basically play straight up when the heads start to go.
 
Uncle Meat says: Maka da way fo da Iron Schaischige (spoken in fluent Jersey Italian)

Bowlaholic

  • Hero Member
  • *****
  • Posts: 711
Re: Question for Charlest
« Reply #8 on: February 06, 2017, 03:44:08 PM »
Charlest you are the expert when it comes to sanding/polish.  I would like your opinion to my question in my post 4 back.
Thank you in advance.
Bowlaholic

xrayjay

  • Hero Member
  • *****
  • Posts: 2686
Re: Question for Charlest
« Reply #9 on: February 06, 2017, 04:23:08 PM »
I'll get some 3M finesse it II just for the spare ball :D or even cheaper, the Motiv power gel polish.. save my UFO, great stuff!
Does a round object have sides? I say yes, pizza has triangles..

aka addik since 2003

Good Times Good Times

  • Hero Member
  • *****
  • Posts: 6462
  • INTJ Personality
Re: Question for Charlest
« Reply #10 on: February 06, 2017, 04:30:00 PM »
I pretty much only use Xtra Shine, it's just a polish that works for me. 
GTx2

mechanic81

  • Full Member
  • ***
  • Posts: 108
Re: Question for Charlest
« Reply #11 on: February 06, 2017, 07:28:27 PM »
I myself have used the snake oil and the UFO both are great products when I've used ufo i generally see on avg  about 2 ft added length on the lanes of course there are always some variables that will make a difference but it's a added help if your playing the burn

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Question for Charlest
« Reply #12 on: February 06, 2017, 08:45:46 PM »
Control It, Delayed Reaction (silicone based?) and UFO (organic agent?) all apparently clog the balls pours to do what they do.  Would the "polish" in the machines found in bowling centers which have been reported to be waxed based (?) and clog the balls pours be in the same classification (meaning they all clog the pours) as the products mentioned above? 

Yes, the old "Polish" was actually a wax based one like that was used for cars. Wax is/was ok for plastic and urethane, but is death for resin coverstocks. It will reduce hook and backend a lot.

I don't know if and/or when bowling center polishing machines went to true polish and not wax. I assume most do today, but I wouldn't bet a single one of my balls on that unless some verified that the machine uses true polish.
"None are so blind as those who will not see."

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Question for Charlest
« Reply #13 on: February 06, 2017, 08:48:44 PM »
Thanks for clarifying that for me, I meant ufo and the like had slip agents. I posted this hastily and forgot the facts....
Anyway,I have a good pearl,purchased a used Wisdom and drilled it up weak,and had my driller put it on the haus machine,but apparently it was still too strong for what I wanted to accomplish,knowing I was gonna be on a known dry set at my lanes. I had been wanting a weaker ball just for this but it's back to square one,unfortunatly.
Probably gonna score the ufo and have it to where the wisdom will cover a few boards and I can basically play straight up when the heads start to go.
 

You're welcome, of course. I like UFO because it only lasts 20 - 25 games and is easily removed. If you're sure that the oil or lack thereof is going to last a long time, by all means, use one of the others. Actually I believe Delayed Reaction has been discontinued, but many pro shops probably still have a bottle somewhere, if they had it at all.
"None are so blind as those who will not see."

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Question for Charlest
« Reply #14 on: February 06, 2017, 08:51:01 PM »
I myself have used the snake oil and the UFO both are great products when I've used ufo i generally see on avg  about 2 ft added length on the lanes of course there are always some variables that will make a difference but it's a added help if your playing the burn

I have often needed to apply a 2nd dose of UFO to see the added length and reduced backend. I try to apply only as much as may be needed; better safe than sorry. You can always apply more of many things; it's harder to start over from scratch
"None are so blind as those who will not see."