BallReviews

General Category => Coverstock Preparation => Topic started by: strikestriketapped on March 07, 2010, 07:51:20 AM

Title: Question regarding Resurrection
Post by: strikestriketapped on March 07, 2010, 07:51:20 AM

If you put Resurrection on a ball at 4000 abralon, is it really taking it from 4000 all the way down to 800? I'm confused as to what Resurrection actually does.

Title: Re: Question regarding Resurrection
Post by: charlest on March 07, 2010, 04:25:20 PM

No need to be confused. It is a thorough cleaner and surface refresher. It will clean the surface very thoroughly, will help remove a little bit of oil from just under the surface and will change the surface to 800 grit US/CAMI. If used with a spinner, it will add the lightest of shine. Many, many balls are very useful at this finish. The abrasive in it both helps to clean the surface and resets the surface grit level.

If you just want to clean it without changing the surface, use Remedy. If you want it slightly finer, use a P2000 grit pad afterwards. (P2000 grit ~ 1000 grit US/CAMI).

If you need/want a deep cleaner, try Clean and Dull. It won't change the surface, because it has no grit in it.
--------------------
"None are so blind as those who will not see."

Title: Re: Question regarding Resurrection
Post by: ValentinoBowling on March 07, 2010, 04:48:34 PM

Charlest is correct.

Thank you for handling the question!

-Kevin
--------------------
www.ValentinoBowling.com
makers of Snake Oil, Remedy RX, Resurrection & UFO
Premium Maintenance Products

Title: Re: Question regarding Resurrection
Post by: charlest on March 07, 2010, 06:26:45 PM

AS long as I did it right ...
--------------------
"None are so blind as those who will not see."