BallReviews
General Category => Coverstock Preparation => Topic started by: heavyarty on December 21, 2008, 12:26:24 PM
-
i was doing a resurface on a classic zone and i noticed that many tiny white dots started appearing on the cover of the ball, is this normal?
--------------------
Current League Arsenal:
Copperhead- Rico, 500 grit w/ big b polish
Twisted Fury- 5 1/2 x 5 1/2.oob
Smash Zone- 4 1/2 x 4, rough buff
Avalanche Slide- 4 3/4 x 5- oob
Avalanche Solid 4 1/2 x 3 pin under- oob
Tzone
-
Don't know if we're talking about the same thing happening, but when I do light resurfaces of stuff that has pits/scratches/etc. in the cover due to use, if I'm using a polish that acts like a wax, I'll get white dots where the pits and scratches are, and that's the wax material getting lodged in the holes.
Some dark coverstocks, however, have white streaks in them -- is that what you're referring to?
Jess
-
its more like white pitholes
--------------------
Current League Arsenal:
Copperhead- Rico, 500 grit w/ big b polish
Twisted Fury- 5 1/2 x 5 1/2.oob
Smash Zone- 4 1/2 x 4, rough buff
Avalanche Slide- 4 3/4 x 5- oob
Avalanche Solid 4 1/2 x 3 pin under- oob
Tzone
-
Sounds like you're just getting the wax/polish material in the pit holes.
Jess
-
I agree.. the white dots are just the sanding dust or polish getting stuck in the small pits in the cover. Try to clean the surface and see if they go away.