win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Sanding with abralon?  (Read 1876 times)

win1soon

  • Jr. Member
  • **
  • Posts: 63
Sanding with abralon?
« on: January 05, 2008, 11:08:50 PM »
When using abralon pads should I use my spinner or sand by hand?I have sanded both ways and the ball is duller without using the spinner but the surface seems to change aftr only a few games.So which is the proper way to use abralon.

THANKS TO ALL WHO REPLY,
WINONESOON
Logged

 

bowler851

  • Sr. Member
  • ****
  • Posts: 331
Re: Sanding with abralon?
« Reply #1 on: January 06, 2008, 07:26:28 AM »
ball spinner if you want to do it right.
Logged

bowl 2 win

  • Hero Member
  • *****
  • Posts: 1533
Re: Sanding with abralon?
« Reply #2 on: January 06, 2008, 07:42:10 AM »
Sand it by hand with water. The pads will last alot longer and it wont give you the lines on the ball the spinner gives you. Doing it by hand gets you closer to box finish than the spinner can.
--------------------
Ebonite - "Bowl to Win!"
Logged
Miles C
Ebonite Regional Staff
BowlNEBA.com

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Sanding with abralon?
« Reply #3 on: January 06, 2008, 04:23:03 PM »
You'll find two opinions on this. I always use a spinner and I ALWAYS use water. The only time I didn't was at Nationals when I couldn't take my spinner with me, (Wouldn't if I could. ) and I needed to adjust the surface.

Abralon pads and Scotch-Brite nylon pads are the easiest ways to adjust bowling ball covers be hand, if needs be.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ
Logged
"None are so blind as those who will not see."

win1soon

  • Jr. Member
  • **
  • Posts: 63
Re: Sanding with abralon?
« Reply #4 on: January 06, 2008, 04:27:16 PM »
Thanks to all who responded.I think I will use my spinner when using abralon from now on.


winonesoon
Logged

  • Guest
Re: Sanding with abralon?
« Reply #5 on: January 06, 2008, 04:28:26 PM »
I also prefer using the spinner and usually with lots of water.


--------------------
Lane Carter, Strike Zone Pro Shops - Salt Lake City, Utah
Brunswick Amateur Staff
Logged

DON DRAPER

  • Hero Member
  • *****
  • Posts: 5576
Re: Sanding with abralon?
« Reply #6 on: January 06, 2008, 05:57:51 PM »
the more water used during the sanding process the better the end result will be.
Logged
Pages: [1]
« previous next »