win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Bigger weight hole? Reaction?  (Read 1726 times)

rx7lover86

  • Full Member
  • ***
  • Posts: 113
Bigger weight hole? Reaction?
« on: August 27, 2005, 02:59:06 AM »
I have a Storm Vertigo, it's drilled pin way over ring finger and slightly to the right.  The RAD stacked straight down, next to thumb.  I'm not all that great with drillings but I do know this ball is drilled to go long and snap hard.  Problem is it's just too strong, and it's not handeling the oil well.  I want something to arch and be a lot smoother.  If I take weight out of the weight hole with this smooth out the reaction?  Or should I just plug and redrill?
Logged

 

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: Bigger weight hole? Reaction?
« Reply #1 on: August 27, 2005, 11:02:46 AM »
Before you plug and redrill, I'd suggest trying a balance hole either on or an inch or so inside the PAP.  Target for 1/2 oz of negative side weight.  If you don't like the results, you just have one more hole to plug.  --  JohnP
Logged

rx7lover86

  • Full Member
  • ***
  • Posts: 113
Re: Bigger weight hole? Reaction?
« Reply #2 on: August 27, 2005, 11:21:31 AM »
800!  The thing shines up real fast tho too..., but I don't think coverstock is going to fix this problem, it's really breaking sharp.  I left 9 pins like crazy last night, and I left the 4-9 about 3 times.
Logged

rx7lover86

  • Full Member
  • ***
  • Posts: 113
Re: Bigger weight hole? Reaction?
« Reply #3 on: August 27, 2005, 09:12:50 PM »
Took it to the shop and he says he's going to put in a balance hole as you suggested.  Thanks
Logged

Speedburner89

  • Hero Member
  • *****
  • Posts: 1573
Re: Bigger weight hole? Reaction?
« Reply #4 on: August 27, 2005, 09:40:30 PM »
I believe that if you drill the weight hole with a big radius and not that deep the reaction will be smooth, and if you drill the weight hole with a small radius but deep, the ball will have a more snappy break to it, i'm not sure, but i think that's how it works.
--------------------
The self proclaimed "confined mind"

"I've got to stop Babara Striesand from taking over the world" - Robert Smith

Snowboarders kick @$$!
Logged

Jesse James

  • Hero Member
  • *****
  • Posts: 3617
Re: Bigger weight hole? Reaction?
« Reply #5 on: August 27, 2005, 10:23:35 PM »
Correct on both accounts. SpeedBurner!
Logged
Some days you're the bug....some days you're the windshield...that's bowling!

Speedburner89

  • Hero Member
  • *****
  • Posts: 1573
Re: Bigger weight hole? Reaction?
« Reply #6 on: August 27, 2005, 10:27:47 PM »
why thank you Jesse!
--------------------
The self proclaimed "confined mind"

"I've got to stop Babara Striesand from taking over the world" - Robert Smith

Snowboarders kick @$$!
Logged

EboHammer4ever

  • Hero Member
  • *****
  • Posts: 578
Re: Bigger weight hole? Reaction?
« Reply #7 on: August 30, 2005, 11:09:41 AM »
What you should do is have your driller put a weight hole on your axis point and take it down to maybe around 1/4 ounce of positive weight to tame the reaction.  Also, you can try raising the surface to maybe a 1000 grit to tame the reaction some more.  If you shine the ball, its just going to make it jump harder off the dry.  Try moving around the lane with it to get more in the oil to make it push down the lane before it hooks also.
Logged
Pages: [1]
« previous next »