win a ball from Bowling.com
« previous next »
Pages: [1] 2

Author Topic: High top weight, short pin  (Read 7674 times)

billdozer

  • Hero Member
  • *****
  • Posts: 4613
  • Goin' Global!
High top weight, short pin
« on: September 11, 2015, 04:36:40 PM »
I know that it should be a pin under the fingers layout, gotcha.


I ordered a bulk order of balls, most were great 1st quality specs. However I got a few odd balls...like 1-2 inch pins..fine. 

What do I do with 1-2 in pin AND 5oz top weight?

Does that just mean pin down hole ________?

Sorry if it a dumb question...I am no proshop operator, I know what works for me through trial and error...and I am hooking all my friends up with NIB equipment...so I don't want to give the ball a home if the specs are terrible...I already know the PSO is going to have a cow...

Anyhow let me know what u think..

Thanks
Logged
In the bag [Infinite Physix, Volatility Torque, Night Road, Phaze III, Burner Solid, Hustle AU]
*Now Testing* IQ Ruby, Renevant, another IQ Tour solid
Coming soon...???

 

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: High top weight, short pin
« Reply #1 on: September 11, 2015, 04:41:26 PM »
Wouldn't 5 oz of top weight make it a 2nd?
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

billdozer

  • Hero Member
  • *****
  • Posts: 4613
  • Goin' Global!
Re: High top weight, short pin
« Reply #2 on: September 11, 2015, 05:00:09 PM »
Quote from: milorafferty on September 11, 2015, 04:41:26 PM
Wouldn't 5 oz of top weight make it a 2nd?

Right, but stay on topic.  It was a super deal.  Regardless...

Drilling the fingers is like 2oz right? Weight hole is another 1oz...as long as its under 2 after drilling were ok right?

I just need to have an answer that 5oz can or cannot be drilled..
Logged
In the bag [Infinite Physix, Volatility Torque, Night Road, Phaze III, Burner Solid, Hustle AU]
*Now Testing* IQ Ruby, Renevant, another IQ Tour solid
Coming soon...???

BradleyInIrving

  • Full Member
  • ***
  • Posts: 156
Re: High top weight, short pin
« Reply #3 on: September 11, 2015, 05:08:45 PM »
Under 3 top and you're good.. 
Logged

billdozer

  • Hero Member
  • *****
  • Posts: 4613
  • Goin' Global!
Re: High top weight, short pin
« Reply #4 on: September 11, 2015, 05:17:45 PM »
Quote from: BradleyInIrving on September 11, 2015, 05:08:45 PM
Under 3 top and you're good.. 

So...deep fingers and were fine?
Logged
In the bag [Infinite Physix, Volatility Torque, Night Road, Phaze III, Burner Solid, Hustle AU]
*Now Testing* IQ Ruby, Renevant, another IQ Tour solid
Coming soon...???

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: High top weight, short pin
« Reply #5 on: September 11, 2015, 05:21:07 PM »
Quote from: billdozer on September 11, 2015, 05:00:09 PM
Quote from: milorafferty on September 11, 2015, 04:41:26 PM
Wouldn't 5 oz of top weight make it a 2nd?

Right, but stay on topic.  It was a super deal.  Regardless...

Drilling the fingers is like 2oz right? Weight hole is another 1oz...as long as its under 2 after drilling were ok right?

I just need to have an answer that 5oz can or cannot be drilled..

I think the top limit is 3 oz. I ran into an issue with my Covert Revolt last year in Reno. Same situation, short pin, but 4 oz of top. It was right at three oz after drilling, one day they said okay, next day said it had too much top. My cg was very close to the center of grip so a weight hole would be in an odd place, so I left it as is.

If you can get the cg over where you can put a reasonable weight hole, you should be able to make it legal.
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: High top weight, short pin
« Reply #6 on: September 11, 2015, 05:22:02 PM »
Quote from: billdozer on September 11, 2015, 05:17:45 PM
Quote from: BradleyInIrving on September 11, 2015, 05:08:45 PM
Under 3 top and you're good.. 

So...deep fingers and were fine?

Depends, if you drill the fingers too deep, you start adding more top.
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

billdozer

  • Hero Member
  • *****
  • Posts: 4613
  • Goin' Global!
Re: High top weight, short pin
« Reply #7 on: September 11, 2015, 05:23:51 PM »
Quote from: milorafferty on September 11, 2015, 05:21:07 PM
Quote from: billdozer on September 11, 2015, 05:00:09 PM
Quote from: milorafferty on September 11, 2015, 04:41:26 PM
Wouldn't 5 oz of top weight make it a 2nd?

Right, but stay on topic.  It was a super deal.  Regardless...

Drilling the fingers is like 2oz right? Weight hole is another 1oz...as long as its under 2 after drilling were ok right?

I just need to have an answer that 5oz can or cannot be drilled..

I think the top limit is 3 oz. I ran into an issue with my Covert Revolt last year in Reno. Same situation, short pin, but 4 oz of top. It was right at three oz after drilling, one day they said okay, next day said it had too much top. My cg was very close to the center of grip so a weight hole would be in an odd place, so I left it as is.

If you can get the cg over where you can put a reasonable weight hole, you should be able to make it legal.

Damn.  I think its the only bad one of my order. 

Logged
In the bag [Infinite Physix, Volatility Torque, Night Road, Phaze III, Burner Solid, Hustle AU]
*Now Testing* IQ Ruby, Renevant, another IQ Tour solid
Coming soon...???

billdozer

  • Hero Member
  • *****
  • Posts: 4613
  • Goin' Global!
Re: High top weight, short pin
« Reply #8 on: September 11, 2015, 05:25:02 PM »
Does anyone have a pic of a layout that would work in suh a case?
Logged
In the bag [Infinite Physix, Volatility Torque, Night Road, Phaze III, Burner Solid, Hustle AU]
*Now Testing* IQ Ruby, Renevant, another IQ Tour solid
Coming soon...???

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: High top weight, short pin
« Reply #9 on: September 11, 2015, 05:26:37 PM »
Quote from: billdozer on September 11, 2015, 05:23:51 PM
Quote from: milorafferty on September 11, 2015, 05:21:07 PM
Quote from: billdozer on September 11, 2015, 05:00:09 PM
Quote from: milorafferty on September 11, 2015, 04:41:26 PM
Wouldn't 5 oz of top weight make it a 2nd?

Right, but stay on topic.  It was a super deal.  Regardless...

Drilling the fingers is like 2oz right? Weight hole is another 1oz...as long as its under 2 after drilling were ok right?

I just need to have an answer that 5oz can or cannot be drilled..

I think the top limit is 3 oz. I ran into an issue with my Covert Revolt last year in Reno. Same situation, short pin, but 4 oz of top. It was right at three oz after drilling, one day they said okay, next day said it had too much top. My cg was very close to the center of grip so a weight hole would be in an odd place, so I left it as is.

If you can get the cg over where you can put a reasonable weight hole, you should be able to make it legal.

Damn.  I think its the only bad one of my order. 



If you don't take it to the Open (or a regional) you will be fine as it will never be weighed. :-)

However, if you do take it to Reno this year and it's close, you can do what I did. I took it like I was going to have a weight hole drilled, then just removed the finger inserts. The idiots at the scale didn't know any different. Once in the squad room, I put them back in.  ;D
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

xrayjay

  • Hero Member
  • *****
  • Posts: 2686
Re: High top weight, short pin
« Reply #10 on: September 11, 2015, 05:33:05 PM »
cheater. ;D
Logged
Does a round object have sides? I say yes, pizza has triangles..

aka addik since 2003

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: High top weight, short pin
« Reply #11 on: September 11, 2015, 05:38:25 PM »
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

xrayjay

  • Hero Member
  • *****
  • Posts: 2686
Re: High top weight, short pin
« Reply #12 on: September 11, 2015, 05:42:44 PM »
Quote from: milorafferty on September 11, 2015, 05:38:25 PM
Quote from: xrayjay on September 11, 2015, 05:33:05 PM
cheater. ;D

Oh hell yea I am.  ;D

You need to stop hang'n with asians from NorCal.
Logged
Does a round object have sides? I say yes, pizza has triangles..

aka addik since 2003

milorafferty

  • Hero Member
  • *****
  • Posts: 11184
  • I have a name, therefore no preferred pronouns.
Re: High top weight, short pin
« Reply #13 on: September 11, 2015, 05:47:01 PM »
Quote from: xrayjay on September 11, 2015, 05:42:44 PM
Quote from: milorafferty on September 11, 2015, 05:38:25 PM
Quote from: xrayjay on September 11, 2015, 05:33:05 PM
cheater. ;D

Oh hell yea I am.  ;D

You need to stop hang'n with asians from NorCal.

I live in Stockton. Probably 75% of everyone I know speaks Tagalog.  ;D
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

xrayjay

  • Hero Member
  • *****
  • Posts: 2686
Re: High top weight, short pin
« Reply #14 on: September 11, 2015, 05:50:24 PM »
Quote from: milorafferty on September 11, 2015, 05:47:01 PM
Quote from: xrayjay on September 11, 2015, 05:42:44 PM
Quote from: milorafferty on September 11, 2015, 05:38:25 PM
Quote from: xrayjay on September 11, 2015, 05:33:05 PM
cheater. ;D

Oh hell yea I am.  ;D

You need to stop hang'n with asians from NorCal.

I live in Stockton. Probably 75% of everyone I know speaks Tagalog.  ;D

hahahahaha
Logged
Does a round object have sides? I say yes, pizza has triangles..

aka addik since 2003
Pages: [1] 2
« previous next »