BallReviews

General Category => Drilling & Layouts => Topic started by: Bluff on February 16, 2005, 07:22:44 AM

Title: How Should I drill this????????? Any Help?
Post by: Bluff on February 16, 2005, 07:22:44 AM
PAP 5 3/4 Up 1/2
Axis tilt   13 degree
Axis Rotation . Varies
Speed 14 to 16 mph 400 Rev.

I want to drill this Blue Pearl Hammer for Dry lanes.
Blue Pearl Hammer Org.
14.2  top 2 3/4
1/2 inch Pin.

I was thinking Pin Axis any other thoughts?
--------------------



Honestly I got a lot of balls. Not kidding.

Edited on 2/16/2005 4:26 PM
Title: Re: How Should I drill this????????? Any Help?
Post by: Bluff on February 16, 2005, 03:46:23 PM
quote:
Put the pin and cg in the grip center.  I did this with a pure hammer and got great length and backend out of this ball.  Believe me with this layout the ball will still hook a lot on the backend but it will be controllable.



Better than Axis? I don't need it to Hook much. but do like to control off dry.
--------------------



Honestly I got a lot of balls. Not kidding.
Title: Re: How Should I drill this????????? Any Help?
Post by: stanski on February 16, 2005, 04:06:39 PM
Instead of pin axis, which is a little extreme, I'd go with the pin 1 1/2 inches from your pap. This will give you a little more movement, and i'd be afraid of pin-axis hitting like crap, as it would use everything up before it got to the pocket, especially on dry.
--------------------
stanski
Title: Re: How Should I drill this????????? Any Help?
Post by: stanski on February 16, 2005, 04:07:07 PM
quote:
Put the pin and cg in the grip center.  I did this with a pure hammer and got great length and backend out of this ball.  Believe me with this layout the ball will still hook a lot on the backend but it will be controllable.


You'd have to have a low track for this not to thump thump as it goes down the lane.
--------------------
stanski
Title: Re: How Should I drill this????????? Any Help?
Post by: channel surfer on February 16, 2005, 10:59:16 PM
pin 4 inches from axis, placed exactly 1 to 1.5 inches above ring, with the cg swung out about 50º.

Great length with a controllable backend.
--------------------
www.csbowling.vze.com

HA HA!!1 IM USING THE INTERNET!!11
Title: Re: How Should I drill this????????? Any Help?
Post by: Bluff on February 17, 2005, 01:27:37 AM
quote:
I got balls, I have never thrown an axis layout ball but this layout that I described will hit the pocket strong; you will have great carry.


Ok thanks for the input. I'll try Chitown layout. will update later see how it goes. I got 2 more 15lb so if that don't work hehehe
--------------------



Honestly I got a lot of balls. Not kidding.