BallReviews

General Category => Drilling & Layouts => Topic started by: SpareK on January 05, 2008, 06:48:43 AM

Title: HS drills vs Carbide tipped
Post by: SpareK on January 05, 2008, 06:48:43 AM
Is there a reason why I don't see High Speed steel drill bits offered on the inter-net sties? The cost is about 50 % less. I drilled my first ball this week and they held size as long as you have a 1/2 " pilot drill. They did not pull into the ball material, they cut like butter. I realize that carbide will last 10 times longer before you have to reshapen them but given the cost I would think that they are more cost effective.
A>A
Title: Re: HS drills vs Carbide tipped
Post by: legend4life95 on January 05, 2008, 03:39:41 PM
I know you can send carbide tip bits off to jayhawk and others online to resharpen, but what type of places locally would do this? I have some that need it, but I don't know where to begin to ask locally.
--------------------


****Kids in the back seat cause accidents; accidents in the back seat cause kids.****
Title: Re: HS drills vs Carbide tipped
Post by: 102101 on January 05, 2008, 03:54:35 PM
quote:
I know you can send carbide tip bits off to jayhawk and others online to resharpen, but what type of places locally would do this? I have some that need it, but I don't know where to begin to ask locally.
--------------------


****Kids in the back seat cause accidents; accidents in the back seat cause kids.****




Might want to check a local machine shop or if there is a tool & die shop close they will probably have the capability also, if they will sharpen them.
--------------------
102101? Hmmmm

www.blackhawklanes.com
Title: Re: HS drills vs Carbide tipped
Post by: SpareK on January 05, 2008, 03:55:13 PM
Most machine shops have the capability of resharpening HS drills but not all machine shops have diamond wheels for carbide. Start calling machines shops within your area and ask if they have carbide tool bit grinding capability.
A>A
Title: Re: HS drills vs Carbide tipped
Post by: Mike Austin on January 05, 2008, 09:07:15 PM
Also check places that sharpen blades for saws, chain saws, and other tools.  Most of the time they can sharpen drill bits too.  My place in Houston did mine for $5 a pop.

BTW, SpareK, you could probably drill 3 holes with a High Speed bit.  They are just too soft, not sturdy enough for bowling balls.

--------------------
www.myspace.com/strikes4days

Check out Tony's Journals - they are FREE!!
http://www.allbowling.com/journal/public.php?uid=67&leagueid=563
Title: Re: HS drills vs Carbide tipped
Post by: legend4life95 on January 05, 2008, 09:38:24 PM
Thanks for all the replys. Will check it out.
--------------------


****Kids in the back seat cause accidents; accidents in the back seat cause kids.****
Title: Re: HS drills vs Carbide tipped
Post by: Moon57 on January 06, 2008, 01:47:33 PM
High Speed drills don't cut it. Mikes right, about three holes is it. And when they get dull they tend to wander. I don't think it's the cover that kills the drill, I think it's the filler. The filler smells just like bondo and it's very abrasive. I drilled alot of holes with my carbides before I had to have them touched up.
--------------------
Moon
--------------------
So many questions, so little time but I'm having fun.
Title: Re: HS drills vs Carbide tipped
Post by: Mike Austin on January 06, 2008, 06:08:36 PM
quote:
I am a tool/die maker,i sharpen the carbide drills for the proshop i go to all the time.


You might want to let some of these guys contact you, you might have some nice side work coming if they can't find someone in their area to sharpen their bits for them!!

--------------------
www.myspace.com/strikes4days

Check out Tony's Journals - they are FREE!!
http://www.allbowling.com/journal/public.php?uid=67&leagueid=563