Author Topic: I need a Drill Bit +1 3/8 (Read 1211 times)

And1_headach · « **on:** July 26, 2006, 07:48:43 AM »

In 3 of my old balls i had the removable thumb insert placed in my ball. i want to remove the outer sleave. the gentleman who originally put the insert in closed his shop down. i now need a bit one size bigger than a 1 3/8. if you have anything please messsege me!
--------------------
MESSING AROUND IN PRACTICE, IS ONLY PRACTICING BAD HABITS!

lefty50 · « **Reply #1 on:** July 26, 2006, 04:01:29 PM »

Not thatit's much help, but the 1-1/2 is more needed for installing. I had the same problem, but the shop was able to remove the sleeve with a 1-3/8 with a little wiggling. No help for install, but it does work for removal....
--------------------
Signature? I don't need no stinking signature...

And1_headach · « **Reply #2 on:** July 26, 2006, 04:06:26 PM »

yeah, i think ill try that this afternoon
--------------------
MESSING AROUND IN PRACTICE, IS ONLY PRACTICING BAD HABITS!

Crankenstein300 · « **Reply #3 on:** July 26, 2006, 07:33:12 PM »

Do you use thumb slugs at all? I have a Vapor Zone with the Turbo Switch Grip sleeve in it and I decided to not use a ton of plug and just glued in a 1 3/8 inch slug in the sleeve and drill the new pitch in the slug. Worked out fine for me. I took the sander to the sleeve a bit to help the glue and then knocked down the excess slug with the router.

And1_headach · « **Reply #4 on:** July 26, 2006, 07:35:07 PM »

i ended up using the 1 3/8 bit, going to the bottom and breaking it out. then wiggling the bit and slowly notching off the sides. i was able to get the rest out with a pair of pliars*SPELLING*.
--------------------
MESSING AROUND IN PRACTICE, IS ONLY PRACTICING BAD HABITS!

Author Topic: I need a Drill Bit +1 3/8 (Read 1211 times)

And1_headach

I need a Drill Bit +1 3/8

lefty50

Re: I need a Drill Bit +1 3/8

And1_headach

Re: I need a Drill Bit +1 3/8

Crankenstein300

Re: I need a Drill Bit +1 3/8

And1_headach

Re: I need a Drill Bit +1 3/8