BallReviews
General Category => Drilling & Layouts => Topic started by: lil League Coach on November 14, 2005, 02:42:42 PM
-
I just re-measured my PAP since i bought some new equipment. I am a high rev, High speed player. When i measured my PAP tonight i found it to be 4 X 1/2" up
Does that sounds about right?
Any help would be great
--------------------
formerly trouter13
Edited on 11/14/2005 11:33 PM
-
thank you very much.. every1 i talk to is around 5,5 1/2 and when i measured mine out at 4" i thought somethin was off but thank you again
--------------------
formerly trouter13
-
To confirm your PAP location, mark it with a piece of white tape on the least flaring ball you have (plastic with a pancake core is best). Now throw it using your normal strike ball release. The piece of tape should be stationary - throughout the whole lane if you used plastic, for the first 15' or so if you used a flaring ball. If you did use a flaring ball, have someone else watch it because you probably won't pick it up until after the flare has begun. -- JohnP
-
thanks john ill try that tonight just to make sure everything is in order
--------------------
formerly trouter13