win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Question about plug cutters/routers...  (Read 3557 times)

JessN16

  • Hero Member
  • *****
  • Posts: 3716
Question about plug cutters/routers...
« on: February 29, 2008, 12:42:41 PM »
I've found a router/plug cutter shield made specifically for cutting bowling ball plugs.

Now what I need to know is what kind of router to buy?

I know nothing about this particular tool, because I've never worked with one. I see routers listed as "fixed-base" and "plunge" and don't know what either means. I don't know what size shank (1/4", etc.) I'll need in order to accept a plug-cutting bit. And, I'd like to know if any other router bits will cut plugs aside from a bit specifically made to do the job.

Any tool experts?

Jess
Logged

 

azguy

  • Hero Member
  • *****
  • Posts: 8364
Re: Question about plug cutters/routers...
« Reply #1 on: March 01, 2008, 08:24:16 AM »
pm sent
--------------------
az guy aka: R & L Bowlers Pro
rlbowlerspro@cox.net
www.rlbowlerspro.com

Logged

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: Question about plug cutters/routers...
« Reply #2 on: March 01, 2008, 08:34:19 PM »
Let me know if azguy didn't answer all your questions, and I'll give it a shot.  --  JohnP
Logged

tjj300

  • Hero Member
  • *****
  • Posts: 855
Re: Question about plug cutters/routers...
« Reply #3 on: March 05, 2008, 02:29:06 PM »
My two cents.  You need a plunge router so you can adjust the height of the bit. You don't need to buy high quality here, Skil or similar is just fine. The bits are sold as both 1/4 and 1/2 inch. Most routers have collets for both. 1/4" carbide straight bit works well.

I put a piece of masking tape on the ball and adjust the height of the bit with the bit on the tape.  This sets the bit to cut down the plug just above the surface of the ball, and I finish it on the spinner.





Edited on 3/5/2008 3:35 PM
Logged

RealBowler

  • Hero Member
  • *****
  • Posts: 722
Re: Question about plug cutters/routers...
« Reply #4 on: March 06, 2008, 09:18:02 AM »
quote:
heres something else that might give you more ideas.

http://www.youtube.com/watch?v=VUtM2gfAGi4


--------------------
Perfection is NOT attainable, but if we chase perfection we can catch excellence...


It gave me no idea where to buy that plastic tube.
--------------------
Haywood

**************************
I don't need a stupid
signature. This is enough.
**************************
Logged

novawagonmaster

  • Hero Member
  • *****
  • Posts: 4279
Re: Question about plug cutters/routers...
« Reply #5 on: March 06, 2008, 03:34:22 PM »
You do not need a plunge-type router.
A non-plunge router is still height/depth adjustable.
--------------------
Jon (in Ohio)

Logged

RealBowler

  • Hero Member
  • *****
  • Posts: 722
Re: Question about plug cutters/routers...
« Reply #6 on: March 07, 2008, 09:31:52 AM »
quote:
real......where you at.    I've got a skill 3/4 HP with plug cutter shield with vacuum attachment.   Router pretty new.      Make it worth your while if within decent range of Houston.


Not close to Houston.  No equipment, and no desire to get into the pro shop business.  I was just pointing out that the video gives you a good idea of making a shield, but does nothing as far as giving any idea where to buy the material, any measurements, or anything else as far as actually putting it together.  Great conceptual video, but a poor instructional video.
--------------------
Haywood

**************************
I don't need a stupid
signature. This is enough.
**************************
Logged
Pages: [1]
« previous next »