win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Layout... how to do - what tools?  (Read 2099 times)

Grayson

  • Hero Member
  • *****
  • Posts: 1411
Layout... how to do - what tools?
« on: March 12, 2007, 07:55:26 AM »
Hi!

The drillers around here are kind a lazy and don't take much vare into layouts... so I'd rather layout the ball myself than have it screwed by the lazy guy..

so what tools do I need to:
- measure PAP from the first track
- layout a ball with knowledge of the PAP

I took a look at the ebonite homepage and saw some stuff there but I don't know what I need...


--------------------
"Have fun and bowl well!" - Grayson


Check out my Vid in my profile.. just short clips cut together about how I bowled and how I play today

and by the way... I am a "Fritz" a "Jerry"... I am from Germany! (And please don't call me Kraut! Cause then I call you Dumbarse)
Logged

 

Raven829

  • Hero Member
  • *****
  • Posts: 1675
Re: Layout... how to do - what tools?
« Reply #1 on: March 12, 2007, 04:06:18 PM »
At a bare minimum, you need a quarter scale.  You can find your PAP with one as long as you know where your initial (release) track is.  You can also use it to lay out the ball.  There are lots of other interesting tools out there (armadillo, ball compass, etc) that make the job easier, but aren't essential.  

Don
--------------------
"On-base percentage is great if you can score runs and do something with that on-base percentage.  Clogging up the bases isn't that great to me. The problem we have to address more than anything is the home run problem."
~Dusty Baker being a total fool
Logged
1. Don't be a dick
2. Try not to hurt others

Grayson

  • Hero Member
  • *****
  • Posts: 1411
Re: Layout... how to do - what tools?
« Reply #2 on: March 13, 2007, 01:51:03 AM »
Thanks.... no another question...

How to get one of these?

Here in Germany it is almost impossible to get them without having a proshop running
--------------------
"Have fun and bowl well!" - Grayson


Check out my Vid in my profile.. just short clips cut together about how I bowled and how I play today

and by the way... I am a "Fritz" a "Jerry"... I am from Germany! (And please don't call me Kraut! Cause then I call you Dumbarse)
Logged

pinbuffer

  • Jr. Member
  • **
  • Posts: 43
Re: Layout... how to do - what tools?
« Reply #3 on: March 20, 2007, 10:51:01 AM »
quote:
Thanks.... no another question...

How to get one of these?

Here in Germany it is almost impossible to get them without having a proshop running


Ditto Raven's comments. All you really need is a wax pencil and a Prosect quarter scale.

You can look at places like Buddies Pro Shop (http://www.buddiesproshop.com/products/11/Pro_Shop_Tools.htm).

If your pockets are over flowing with money, you can look at the really cool toys at Jayhawk (http://www.jayhawkbowling.com/Products/layout.html) and other similar companies like Innovative (https://www.shop.innovativebowling.com/categoryNavigationDocument.hg?categoryId=35).

I'm not sure about sites across the big pond though.
Logged

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7606
Re: Layout... how to do - what tools?
« Reply #4 on: March 20, 2007, 11:00:02 AM »
Du kannst ggf. bei der Spobag in Düsseldorf anfragen - die importieren viel Equipment. Aber ob die auch an "Endverbraucher" verkaufen, bezweifele ich. Bleiben eigentlich nur Online-Shops in den USA, une TEURER Import zu Fuss. Viel Erfolg!

Außerdem brauchst Du eine gescheite Bohrpresse, um die Piches richtig hinzubekommen. Einen Ball zu layouten ist nicht das Problem, eher die Löcher selber

(Sorry to revert to German )
--------------------
DizzyFugu - Reporting from Germany
Confused by bowling? Check out BR.com's vault of wisdom: the FAQ section
Logged
DizzyFugu ~ Reporting from Germany

Grayson

  • Hero Member
  • *****
  • Posts: 1411
Re: Layout... how to do - what tools?
« Reply #5 on: March 20, 2007, 11:32:07 AM »
quote:
Du kannst ggf. bei der Spobag in Düsseldorf anfragen - die importieren viel Equipment. Aber ob die auch an "Endverbraucher" verkaufen, bezweifele ich. Bleiben eigentlich nur Online-Shops in den USA, une TEURER Import zu Fuss. Viel Erfolg!

Außerdem brauchst Du eine gescheite Bohrpresse, um die Piches richtig hinzubekommen. Einen Ball zu layouten ist nicht das Problem, eher die Löcher selber

(Sorry to revert to German )
--------------------
DizzyFugu - Reporting from Germany
Confused by bowling? Check out BR.com's vault of wisdom: the FAQ section


Danke - Thanks

I am not trying to get the quarter scale anymore... I made a decision to have my next ball punched not at my local proshop but at the next possible proshop... in Munich ... long way to drive but I hope to get a really good drilling..

The Tsunami I play right now is not drilled bad... I decided the layout myself... but my oiler the Carbide+ is screwed... the fillings stand up and are not grinded well and the layout is bulls hit... well learning the hard way...
--------------------
"Have fun and bowl well!" - Grayson


Check out my Vid in my profile.. just short clips cut together about how I bowled and how I play today

and by the way... I am a "Fritz" a "Jerry"... I am from Germany! (And please don't call me Kraut! Cause then I call you Dumbarse)
Logged
Pages: [1]
« previous next »