win a ball from Bowling.com

Author Topic: Analysis of layout change please-mechanics of the hand on thumb pitch  (Read 4356 times)

lefty50

  • Hero Member
  • *****
  • Posts: 1822
Warning ahead of time, this is a rather lengthy post.

I'm hoping someone can help me take the next step on analyzing a layout change. Please do not tell me to go see my local driller. I have two drillers who want to do  totally separate things to my layout, and it's become a problem. I am moving in my own direction based on information from the boards plus 50+ years of bowling, and am confident I'm moving in the right direction, largely going back to what I did previously. I need one more piece of information in order to get my game back where it should be.

Averaging 207 for age 59 is not bad, but I was averaging 212 last year. This year, after making changes to accommodate my changing hand and on the recommendation of my driller, I find myself extremely inconsistent on release, dropping just as easily from 250 to 160 every week. Clearly the ball is hanging on release. Combined with knee problems, it was a lousy year. But the knee is better now, and I need to get things squared up before going to Nationals.

With that as a baseline, I would like some additional help working through the following:

Current stats:
Left handed, 275 revs, 15.5 off the hand, PAP (presumed consistent and actually irrelevant for this particular discussion) 4-3/4 by 3/4 up, rotation 45-60 usually, tilt unknown at this moment...
Ball number one (my league ball):
Finger pitch 1/4 reverse ring, 1/8 reverse middle
Thumb pitch zero reverse 1/8 left (under)
Total span 4 5/8 ring, 4 9/16 middle
Ball number 1 uses an IT
Ball number two (test ball):
Finger pitch 3/8 reverse ring, 1/4 reverse middle
Thumb pitch 3/16 reverse (away)
zero lateral thumb pitch
Total span 4 9/16 ring, 4 1/2 middle
Ball #2 uses a slug right now until I get everything locked in...

I should add here that in both cases I have 15/16 left lateral finger pitch in the ring, and 1/8 left middle. Yes, the 15/16 is really odd, but I've cracked my knuckles for years and anything less rubs...

Test results...

With ball number two I am noticeably cleaner on release. I can feel the pads of my fingers better, and revs are a little better, but not a lot.
Here's the problem...
With ball number two having additional pitch away from center in both directions I would anticipate that my hand would feel a little more flat against the ball. However, I find that when I insert my hand into the ball I can actually feel and see my hand "stand up" on the ridge (the bony part of fingers at the base of the hand) compared to ball #1, and the base of my thumb hurts after bowling. If I look at the way my hand moves mechanically I would anticipate that the opposite would have been true, unless of course part of the reason is that your hand is inverted while bowling. First game out of the box with the test ball was 255, with one miss due to brain fart. Felt good.

The quandary is what to do next. I do not want to add much more reverse. I've never gone more than 1/4 any time in my life. I feel like I should add more away pitch laterally, but I am unable to determine if it is the totality of changes that is causing my thumb to hurt or whether I simply need to move my thumb back under toward the palm. Of course, there's always a chance keeping the thumb pitches where they are and changing span might help.

Probably the bottom line question is understanding the net effect of lateral thumb pitch, but I need to look at this holistically.
I hope that is sufficient information, if not please let me know. All thoughts appreciated.
« Last Edit: June 08, 2014, 02:10:30 PM by lefty50 »

 

JustRico

  • Hero Member
  • *****
  • Posts: 2652
When making a multiple of changes at once make it difficult to key in on or reference one solution...
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

lefty50

  • Hero Member
  • *****
  • Posts: 1822
I was afraid that was going to be an answer somebody would say. Understanding that it is difficult, I am pretty much just going back to what I used to use.  Perhaps if we can boil it down to the basic question, that would be even better. In general, what is the effect of the laterally going either toward the palm or away from the ball?

JustRico

  • Hero Member
  • *****
  • Posts: 2652
In fingers or thumb? You cannot have contrasting angles in your fingers vs your thumb, it will put stress on your digits as well as slow the release
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

lefty50

  • Hero Member
  • *****
  • Posts: 1822
Rick, that is a piece of information I was unaware of, and may be the explanation. With the given (and again I am left-handed) that my fingers are currently ring finger 15/16 (due to knuckle problem) and middle finger 1/8, both left lateral pitch, it sounds to me like you are saying that zero lateral would hurt more than 1/8 left lateral since it is effectively starting to go in the opposite direction. That is exactly what I am experiencing. Therefore, if I have understood you correctly, my next move would be to reinstate 1/8 left lateral thumb pitch to see if it relieves the problem, correct? I understand there could be span issues and other considerations, but in general, just thinking about the thumb lateral pitch in relation to the fingers, it sounds like that would be the correct move....

JustRico

  • Hero Member
  • *****
  • Posts: 2652
I wouldn't change the thumb I'd adjust the fingers...those are more than likely causing you more distress
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
I have never known a lefty to have both fingers left lateral or a righty to have both fingers to have right lateral.

I agree with Just, fingers and thumb often move laterally together for the same bowler.

I also agree with him, changing one variable is often best!  At a time to do a real scientific type test.

Regards,

Luckylefty
PS what does your "Coke bottle" test say about your lateral?  How cleanly does your "pickle" (thumb) go in to your "barrel" with the new 0 lateral setup?
PPS a shortened span with more reverses, pain under the flat of the thumb...my...my is bevel look dramatically less on the shorter span ball?
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

lefty50

  • Hero Member
  • *****
  • Posts: 1822
Thank you LL, not being a ball driller I am very interested in understanding what a normal hand looks like. This is good info. Unfortunately, the problem with remote analysis is that you cannot see the patient's hand. After years of cracking my knuckles, and no matter whether this happens to others or not, I must face the fact that my left hand ring and middle finger from the first knuckle to the tip make a significant bend to the left and are swollen with a lump on the right side of each finger. Respectfully therefore, I have to fit the hand and not the norm.
To answer your question about the Coke bottle test, the answer is my thumb points directly at the middle finger, indicating 1/8 left lateral, which is what I think I'm going to do next.

Also, as a computer engineer and software developer for 40 years, I always preach to my staff "never change more than one thing at a time", so I get the message. I completely agree with it. The part that is not coming through is that although I made multiple changes at once, the change in fingers is something that I've tried to correct multiple times over the years. In fact, it was me once again listening to a driller saying "that isn't normal" that made me move away from finger positions that work yet again. My fingers are bent. So while I technically was changing fingers and thumbs at the same time last week, I was merely putting the fingers back to the only point that I know works for them without pain, just as one would reset a change in a computer problem before moving on to the next point in the troubleshooting path.

Hopefully this helps explain the current situation a little better. The problem with the fingers has been resolved. It is done. Like it or not, that is my hand. It is the hand I was dealt with (no pun intended) and it is in the only comfortable position that repeated trial and error have shown over the years. The question now is what corresponding adjustment to the sum would be necessary to correct the symptoms, which once again our pain at the base of the thumb and the obvious visual reference that my hand is tilting up off the ball as I insert the thumb. It truly is as simple as that. The pressure on the base of the thumb could be coming from a need to shorten the span, or I could add reverse and lengthen the span, or I could move under, or I could move away to change the hand position.
Many thanks for the feedback. I hope I've added enough extra detail to aid in suggestions.

JustRico

  • Hero Member
  • *****
  • Posts: 2652
If you change both fingers to compensate they should lay more in align accordingly with your thumb...putting left in your thumb or towards your palm will slow your release and put more strain on your digits - fingers & thumb...you've said the release was good, leave the thumb alone and adjust the finger laterals...

I've never seen anyone throw a coke bottle down the lane
« Last Edit: June 09, 2014, 10:02:14 AM by JustRico »
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

lefty50

  • Hero Member
  • *****
  • Posts: 1822
I know that I should just let the topic drop, but silly me... I'm too curious, I have to know the answer. You're saying leave the humb alonw and adjust the fingers... I can't move my fingers laterally from their current position without them rubbing on one side or the other. So what do you mean by adjust the fingers when there is no lateral adjustment available? You mean by changing forward/reverse, or shortening the span... Something else?

JustRico

  • Hero Member
  • *****
  • Posts: 2652
Re: Analysis of layout change please-mechanics of the hand on thumb pitch
« Reply #10 on: June 09, 2014, 04:30:31 PM »
If you're are wanting an adjustment to compensate for the pain in your thumb as well as your hand notating flat in comparison I would lengthen the span slightly
You've added away in your fingers and your thumb which theoretically has shortened your span by relaxing the digits so go 1/16" longer so your hand may lay flatter
As far as the fingers laterals...if you had angles in your thumb that were in a similar direction as your finger laterals, if you've relaxed the thumb angle the finger laterals CAN go in a similar direction...just from my experience
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com