win a ball from Bowling.com
« previous next »
Pages: 1 [2]

Author Topic: Suggestions on increasing axis tilt  (Read 9659 times)

lil League Coach

  • Hero Member
  • *****
  • Posts: 1701
Suggestions on increasing axis tilt
« on: June 19, 2015, 09:35:28 AM »
I'm looking for some suggestions from you guys on increasing axis tilt.  I have a customer with extremely low tilt and I have a couple of ideas I was pondering but I would to hear what worked for you guys.  Any suggestions is greatly appreciated.

Here are the stats I measured:
Ball speed - 17mph
Rev rate - 300
Axis tilt - 6 degrees
Axis rotation - 70 degrees
Pap- 5 1/4 x 1 1/8 up
Logged

 

J_w73

  • Hero Member
  • *****
  • Posts: 2554
Re: Suggestions on increasing axis tilt
« Reply #16 on: June 21, 2015, 12:47:11 PM »
Quote from: JustRico on June 21, 2015, 12:34:47 PM
Adding right lateral will increase the potential of over rotating and/or going over the top of it due to decreasing the release speed...

Anything is possible. I know for me at 0 or 1/8 right in the thumb it slowed my release because my thumb was not at the correct angle for my natural release. Not until I started going right in my thumb is when my thumb started to free up and I could turn the ball from behind the ball.. Instead of having to get on the side of the ball to get out if it. I know it sounds opposite of the norm.
Logged
350 RPM, 17 MPH

JustRico

  • Hero Member
  • *****
  • Posts: 2652
Re: Suggestions on increasing axis tilt
« Reply #17 on: June 21, 2015, 12:54:52 PM »
He already has an extreme up pap coordinate - which translates to his thumb staying in the ball too long thru the rotation plus an extreme amt of rotation, which in my experience his thumb is already staying in too long thru the release
There are always going to be anomoly's (btw I'd never got anyone with 3/4" lateral - too extreme) and extremities only increase potential for inconsistency...
Logged
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

J_w73

  • Hero Member
  • *****
  • Posts: 2554
Re: Suggestions on increasing axis tilt
« Reply #18 on: June 21, 2015, 01:00:59 PM »
Quote from: JustRico on June 21, 2015, 12:54:52 PM
He already has an extreme up pap coordinate - which translates to his thumb staying in the ball too long thru the rotation plus an extreme amt of rotation, which in my experience his thumb is already staying in too long thru the release
There are always going to be anomoly's (btw I'd never got anyone with 3/4" lateral - too extreme) and extremities only increase potential for inconsistency...

Couldn't the up cooridinate be a function of the angle that his fingers are applying pressure and releasing? That is why I mentioned the spans as well.

I know. I'm extreme. Was dealing with my fit for a very long time and not until I went to 3/4 right everything fell together and started working..  Love for you to take a look at my grip and see what you think.
Logged
350 RPM, 17 MPH

JustRico

  • Hero Member
  • *****
  • Posts: 2652
Re: Suggestions on increasing axis tilt
« Reply #19 on: June 21, 2015, 01:02:49 PM »
The fingers laterals merely effect fit/comfort and yes span can always effect it but the thumb is the first to exit the ball and the longer it stays in the thru the rotation unnaturally, the more it effects the coordinates
An extreme up coordinate mimics a full roller release...as an example
Logged
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

J_w73

  • Hero Member
  • *****
  • Posts: 2554
Re: Suggestions on increasing axis tilt
« Reply #20 on: June 21, 2015, 01:11:53 PM »
Quote from: JustRico on June 21, 2015, 01:02:49 PM
The fingers laterals merely effect fit/comfort and yes span can always effect it but the thumb is the first to exit the ball and the longer it stays in the thru the rotation unnaturally, the more it effects the coordinates
An extreme up coordinate mimics a full roller release...as an example

I agree with the mimicing the full roller.  Don't full rollers tend to have a large clt or offset thumb on their hand ? That is how my dad was and going more right in his thumb brought his grip more down the T line and moved his track off his thumb and increased his tilt.
Logged
350 RPM, 17 MPH

JustRico

  • Hero Member
  • *****
  • Posts: 2652
Re: Suggestions on increasing axis tilt
« Reply #21 on: June 21, 2015, 01:13:18 PM »
It's a round object there is no such thing as an offset
Logged
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

J_w73

  • Hero Member
  • *****
  • Posts: 2554
Re: Suggestions on increasing axis tilt
« Reply #22 on: June 21, 2015, 02:01:58 PM »
Quote from: JustRico on June 21, 2015, 01:13:18 PM
It's a round object there is no such thing as an offset


Yes I know. I agree with you. I know the measurement is taken off the T-line regardless of what you want to call it. I was talking about the hand, not the ball.  I was talking about the thumb being offset left of the natural line of the fingers on the hand. Creating a large CLT angle when referring to the ball.
Logged
350 RPM, 17 MPH

J_w73

  • Hero Member
  • *****
  • Posts: 2554
Re: Suggestions on increasing axis tilt
« Reply #23 on: June 21, 2015, 02:05:02 PM »
Quote from: JustRico on June 21, 2015, 01:13:18 PM
It's a round object there is no such thing as an offset

I'm in the Sacramento area.  I know time is money.  PM me with how much you would charge to take a look at my current grip and equipment, measure my hand and refit me,  and give recommendations on where you think my grip should be.  Thank you
Logged
350 RPM, 17 MPH

JustRico

  • Hero Member
  • *****
  • Posts: 2652
Re: Suggestions on increasing axis tilt
« Reply #24 on: June 21, 2015, 02:06:22 PM »
One million dollars (:
Logged
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

J_w73

  • Hero Member
  • *****
  • Posts: 2554
Re: Suggestions on increasing axis tilt
« Reply #25 on: June 21, 2015, 02:21:27 PM »
Quote from: JustRico on June 21, 2015, 02:06:22 PM
One million dollars (:

My bowling is worth a lot to me, but I can't manage that.
Logged
350 RPM, 17 MPH

JustRico

  • Hero Member
  • *****
  • Posts: 2652
Re: Suggestions on increasing axis tilt
« Reply #26 on: June 21, 2015, 02:23:36 PM »
Ok...
Logged
Co-author of BowlTec's END GAMES ~ A Bowler's COMPLETE Guide to Bowling; Head Games ~ the MENTAL approach to bowling (and sports) & (r)eVolve
...where knowledge creates striking results...
BowlTEc on facebook...www.iBowlTec.com

J_w73

  • Hero Member
  • *****
  • Posts: 2554
Re: Suggestions on increasing axis tilt
« Reply #27 on: June 21, 2015, 02:38:41 PM »
Quote from: JustRico on June 21, 2015, 02:23:36 PM
Ok...

Do you know of anyone that you could recommend that is well versed at fitting odd hands?  Anywhere in the USA.  Or let me know if you have a more realistic price.
Logged
350 RPM, 17 MPH
Pages: 1 [2]
« previous next »