win a ball from Bowling.com

Author Topic: Need some ideas.....  (Read 4442 times)

jdball299

  • Full Member
  • ***
  • Posts: 155
Need some ideas.....
« on: February 29, 2012, 10:01:25 PM »
If you could pick TWO of any current Brunswick or DV8 balls to bowl on Cheetah, Scorpion, THS, and Chameleon which would they be?  Have a summer league coming up where we can only throw the two balls we get at the start of the league.
 
I'm thinking Nexxus/Revenge and Pink/Purple Karma/Reckless, both pin down for good midlane and control on the back end.  I'm a lefty so I won't need length or angle. 

What you guys think?


"...do or do not, there is no try."


St. Louis USBC Sport Bowling
Best Bowling Pro Shops Inc., St. Louis MO.

 

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Need some ideas.....
« Reply #1 on: March 01, 2012, 06:15:20 AM »
Since most people want smooth even reacting balls on most sport patterns, in general, I'd agree.
 
Since you didn't mention any of your release specs, I'm assuming your ball speed/rev rate ratio is in the average range (i.e you're not highly speed dominant, nor are you highly rev dominant) and you don't have 200 rpms nor do yo have 500 rpms. Those would change the range of balls you'd be looking for.
 
I'd also add the Massive Damage and the Karma solid into your consideration list.


"None are so blind as those who will not see."

 
"None are so blind as those who will not see."

Rc Charger

  • Sr. Member
  • ****
  • Posts: 379
Re: Need some ideas.....
« Reply #2 on: March 01, 2012, 06:30:16 AM »
Dv8 line I would use Revenge and Misfit,  Brunswick line I would go Nexus Solid and Versa Max.  Combining the two companies I like the Revenge and Versa Max.

Rob Cabello
***** The opinions expressed are solely those of the writer and not of the Brunswick Corporation*****
 dv8bowling.com
bowlersuniverseproshops.com

Brandon Riley

  • Hero Member
  • *****
  • Posts: 1157
Re: Need some ideas.....
« Reply #3 on: March 01, 2012, 02:50:52 PM »
Nexus Solid and Too Reckless for me, but I am right handed

Blue Karma without the polish wouldn't be a bad choice either depending on how you like to play the lanes



Brandon Riley



DV8 Regional Staff


 


The opinions expressed are solely those of the writer and not of Brunswick Corporation.
 
Edited by Brandon Riley on 01/03/2012 at 3:52 PM
Brandon Riley
Brunswick Regional Staff

BrunsWolf

  • Hero Member
  • *****
  • Posts: 588
Re: Need some ideas.....
« Reply #4 on: March 01, 2012, 09:29:54 PM »
Assuming normal-ish release specs, I'd have to go with a pin-down Versa-Max (maybe at 3000-4000 grit) for Cheetah, fresh Chameleon, and playing further out on THS and then a pin-up Nexxus f(P+R) for Scorpion and moving inside when the lanes open up more on Chameleon and THS.

 

Like others have said, with your release specs we can narrow down possibilities alot more.


Jared Wolf


Brunswick Technical Staff


The opinions expressed are solely those of the writer and not of Brunswick Corporation
Jared Wolf
Jonesboro, AR
Brunswick Advisory Staff

The opinions expressed are solely those of the writer and not of Brunswick Corporation.

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7606
Re: Need some ideas.....
« Reply #5 on: March 02, 2012, 02:47:44 AM »
I haven't seen one in action yet or even tried one, but I'd also have a keen eye on the Versa-Max, probably with a high grit finish and with a pin-in-ring finger/stacked layout (say,  pin @ 4.5-4.75 from PAP) as the stronger piece, and either a Misfit or a Karma (probably a normal Pearl or a Solid, the new Activator+ would certainly be too aggrissive for my needs) with a long pin, placed above the fingers, and polished, for later games and eso. Cheetah.


DizzyFugu - Reporting from Germany
2010/11 Benrather BC Club Champion
Confused by bowling? Check out BR.com's vault of wisdom: the unofficial FAQ section
 
Edited by dizzyfugu on 02.03.2012 at 1:48 AM
DizzyFugu ~ Reporting from Germany

charlest

  • Hero Member
  • *****
  • Posts: 24526
Re: Need some ideas.....
« Reply #6 on: March 02, 2012, 02:49:31 PM »
I really don't understand the Misfit recommendation by several people.  It's a flippy ball like the Cyclone.
Unless you force an even reaction by a drilling/surface combination or your on release/ball speed forces an even reaction from most balls, I can't see using it on any sport pattern. For the oil it handles the Karma solid is much more suitable piece for the lighter oil sport patterns.


"None are so blind as those who will not see."

 
"None are so blind as those who will not see."

jdball299

  • Full Member
  • ***
  • Posts: 155
Re: Need some ideas.....
« Reply #7 on: March 06, 2012, 02:25:04 AM »
Hey guys thanks for the updates so far.  Some background on my preferred game....
 
I'm a Lefty, speed dominant tweener.  I can rev up the ball but prefer not too.  I prefer to play straight and like the outside of the lane around 567 more than inside 10 but can play inside if need be (very direct).  16-17 mph, 30* axis rotation, approx 295-325 rpm (never measured).  (think parker bohn but with less speed, bout the same rev.)
 
I'm leaning towards the Nexxus (i have one and love it, wouldn't mind another) or the regular nexus solid.  I am still not certain on the second piece, either a nexus pearl (again have one and love it, another with a different layout would be great), versamax, reckless, Karma A+ or misfit.   Both balls whatever I pick will be drilled the same with a smooth reacting drilling for control. 
 
Any more thoughts?  I like the idea of going nexxus/nexus solid and nexus pearl, I can use my speed to make up for stronger gear and I can throw my nexus pearl on THS now, just worried about cheetah with that ball but the solid with polish might be fine.  Trying to be careful not to buy a ball that's too weak for this concept and not get to use it when I can't use my stronger one.  Thanks for the help....


"...do or do not, there is no try."


St. Louis USBC Sport Bowling
Best Bowling Pro Shops Inc., St. Louis MO.

makpa

  • Full Member
  • ***
  • Posts: 226
Re: Need some ideas.....
« Reply #8 on: March 06, 2012, 07:03:59 AM »
I would go with Nexus Solid and Pearl. I am sligtly rev dominant at 480rpm at 18.5 mph and the Nesus Solid is great with some surface on cheatah with the correct drilling. Need it to burn of rotation fast.



racincowboy3

  • Full Member
  • ***
  • Posts: 124
Re: Need some ideas.....
« Reply #9 on: March 06, 2012, 10:19:20 AM »
versa max or reckless for the second ball...