Author Topic: Ebonite ball rack. (Read 2895 times)

Ernie McCracken · « **on:** June 28, 2004, 10:12:10 PM »

Anybody out there own the Ebonite ball rack that they sell? I need a nice and organizied place to store all my older gear and was thinking about this rack. I'm wondering if they're solid and not poor quality. Let me know if you have one or if you know of someone who does. Thanks!
--------------------
Evolutionary. Revolutionary.

da Shiv · « **Reply #1 on:** June 29, 2004, 01:17:25 PM »

I've been wondering the same thing. I've been considering one of those for quite awhile. It looks pretty utilitarian in the photos, and looks to me like it might very well kind of need a bit of bracing in the back. I hope somebody has one and can give us some feedback on it.

Shiv
--------------------
Listening to the monotonous staccato of rain on my desk top

Ernie McCracken · « **Reply #2 on:** June 29, 2004, 01:27:11 PM »

quote:
our pro shop has one..never more then 6 balls on it tho...but for all practical purposes a couple of 2x4s make a nice rack..
--------------------
-strikes show you can play the game..spares show your actually good at it-

Only 6 balls on there because it's not strong enough to hold 12 or only 6 on there because you just don't have more balls to put on the rack?
--------------------
Evolutionary. Revolutionary.

Strider · « **Reply #3 on:** June 29, 2004, 02:13:49 PM »

I'm sure you could build a sturdier one for less, but I'm lazy. I have one of the Ebonite racks and it's fine. Holds 12 balls with no problems.
--------------------
Penn State Proud

Ron Clifton's Bowling Tip Archive

debs130 · « **Reply #4 on:** June 29, 2004, 03:13:22 PM »

Ours is holding up quite well with 12 balls on it. However, it did not come preassembled.

Debbie

thfonz98 · « **Reply #5 on:** June 29, 2004, 04:15:22 PM »

ive had mine for a year with 12 balls on it...i only switch out balls from the top

its fine...good enough quality i guess

had to put mine together w/o a powered driven screwdriver(which i left at parents house)..made putting the thing together take about twice as long and a tired wrist later

Edited on 6/29/2004 4:13 PM

Ernie McCracken · « **Reply #6 on:** June 29, 2004, 05:58:20 PM »

Thanks for the replies everyone! As usual, I appreciate the feedback given here. I'll be getting one of these racks as soon as I can. The wife is complaining about all the balls on the floor.
--------------------
Evolutionary. Revolutionary.

seadrive · « **Reply #7 on:** June 30, 2004, 09:53:41 AM »

If you don't have a power drill, be prepared for a few blisters in your palm.

Let me put it this way. These racks are fine for storage, where you're putting one on or taking one off a few times a week. But there's no way one of these would survive as a ball storage rack in a busy bowling alley, with people dropping balls on it. It wouldn't last a day, IMHO.

The quality is definitely mediocre. Some of the pre-drilled holes didn't line up on mine, which is where the blisters came from.

It was worth the few bucks it costs, but I'm not looking forward to assembling another one.
--------------------
seadrive
Cogito ergo bowl

JOE FALCO · « **Reply #8 on:** June 30, 2004, 11:00:22 AM »

I have two of them .. if I had more wall space in my office I'd have a third! I agree they would not survive in a bowling ally .. but for storage at home .. CAN'T BEAT THEM!

I don't have POWER TOOLS and had no problem putting the racks together. Think it was eight screws per shelf with four shelves or 32 screws .. each holds twelve balls in an EASY ACCESS environment! I think they have come down in price since they originally come out.

Truth of the matter is .. if you need more then one .. BUY ONE .. before you put it together buy the wood and duplicate the pieces and make it up yourself .. it's easy enough!
--------------------
Hit them light and watch them fight
J O E - F A L C O

Psychoballtester · « **Reply #9 on:** June 30, 2004, 11:44:14 AM »

Me,

I have one too,there pretty ok,BTW
I got mine on eBay.I put somr linko's
below,its up to you.It's your moola.

Like on of the threads ABOVE ME,Its a
Beeaaactheee to put together,hoo boy!!

Aaaa,or you can go to your nearest
Building Supply warehouse
(aka Home Depot,Lowes,etc,)and
build your own ball rack.

Ta da,link this!!!!If not,put and caste,or something
like that,yoy know what ta do.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=2905&item=3685791593&rd=1&ssPageName=WDVW

or if this rack sold try this!

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=2905&item=3685790904&rd=1&ssPageName=WDVW

Either way ya do it,GL!!

Psycho.B.T

agroves · « **Reply #10 on:** June 30, 2004, 02:16:57 PM »

Built my own, 2 x 10's for the ends, 2 x 4's for the shelfs with a 45* angle cut for the balls to rest on, 2 x 2's under the shelves for support, 2 x 4's for the base. I put 3 screws for each end of each 2 x 4. I also countersunk the screw, applied wood putty over the top and used liquid nails. I am pretty sure that thing is never coming apart.

Andrew

If i can I will get a pic of it. Dimensions are 36" tall x 8 1/2" wide(shelf portion) x 29" long.

--------------------
FUFU

If you're an idiot, you can join my ignore list

Edited on 6/30/2004 2:14 PM

Author Topic: Ebonite ball rack. (Read 2895 times)

Ernie McCracken

Ebonite ball rack.

da Shiv

Re: Ebonite ball rack.

Ernie McCracken

Re: Ebonite ball rack.

Strider

Re: Ebonite ball rack.

debs130

Re: Ebonite ball rack.

thfonz98

Re: Ebonite ball rack.

Ernie McCracken

Re: Ebonite ball rack.

seadrive

Re: Ebonite ball rack.

JOE FALCO

Re: Ebonite ball rack.

Psychoballtester

Re: Ebonite ball rack.

agroves

Re: Ebonite ball rack.