win a ball from Bowling.com
« previous next »
Pages: 1 [2] 3

Author Topic: Ebonite Mission  (Read 9203 times)

PWOICantHearU

  • Sr. Member
  • ****
  • Posts: 384
Ebonite Mission
« on: January 05, 2010, 07:28:08 AM »
Just added to the site.

http://ebonite.com/products/product_detail/MISSION
--------------------
Andrew Hurst
Texas is pumping out revolutionary equipment!
Logged

 

abproshop

  • Jr. Member
  • **
  • Posts: 7
Re: Ebonite Mission
« Reply #16 on: January 06, 2010, 10:02:27 PM »
Everyone I have talked to that has thrown this ball compares it to a One or a Widow when they were released. Different than everything through the pins. I expect you will see plenty of this ball prior to its Feb. 2nd release. This is an important release for Ebonite and I think we will get Hopkinsville's best.

Couldn't agree more about the Magic Action, have drilled them for a few customers that have both and they all remark how it is stronger down then the Mutant. They give me the "I was told Ebonite balls don't hook down the lane" line.
--------------------
If your going to bowl, Bowl to Win.
Logged

Zack Pelton300

  • Sr. Member
  • ****
  • Posts: 281
Re: Ebonite Mission
« Reply #17 on: January 06, 2010, 11:36:08 PM »
well I have not gotten to throw it yet. I will give a review on it.
--------------------
Zack Pelton
Olathe, Kansas
Ebonite Amateur Staff
Ebonite Bowl 2 Win
www.ebonite.com
Logged

Xplosive89

  • Jr. Member
  • **
  • Posts: 52
Re: Ebonite Mission
« Reply #18 on: January 07, 2010, 12:10:53 AM »
quote:
you cant compare ebonite to big b

big b new balls = good/great

ebonite balls = junk


Brunswick is now made in Mexico so they have to be good right? hahaha

seriously dude, all the companies make good stuff, but it just all depends on how certain balls/companies match up to your individual game. me personally, i HATE brunswick.....why? because the balls dont roll right at all for me. I am better suited with Hammer/Track/Ebonite equipment for my individual game. Its all a matter of personal preference when it really comes down to it.
Logged

kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: Ebonite Mission
« Reply #19 on: January 07, 2010, 01:04:53 AM »
+1

There is a lot of good equipment out there, and a lot of stupid people.
Those numbers you can check on any forum site.

Hopefully Ebonite gets back on it because Hammer has been very impressive lately....Not that it matters, it all goes back to the same place lol
--------------------
" men lie, women lie, numbers don''t "

Edited on 1/14/2010 5:14 PM
Logged
…… you can't  add a physics term to a bowling term and expect it to mean something.

tizzle

  • Hero Member
  • *****
  • Posts: 2159
Re: Ebonite Mission
« Reply #20 on: January 08, 2010, 07:20:39 AM »
x2... add Track and Columbia to that mix as well... the ebonite mantra is definately stepping it up.. and is winning tournaments on the tour... so I would say they are doing ok!
--------------------
Hmm..Lets see what I have in this bag...
a Frenzy, 2.5 percent of a C-System, and a Python Snake.. how can I loose....

....HG-300(2006 w/Desert Heat)...299 (03/15/09 w/Agent Orange)...HS-776 (Hot Sauce Pearl & Ebonite Magic)
Logged

DanR

  • Sr. Member
  • ****
  • Posts: 396
Re: Ebonite Mission
« Reply #21 on: January 08, 2010, 09:24:14 PM »
quote:
you cant compare ebonite to big b

big b new balls = good/great

ebonite balls = junk


When was the last good Brunswick ball?  Sure if you want a ball that bails on the backend then I guess Brunswick would be the choice.  Unless you throw it like rash Brunswick balls are mush.

Magic Action is better then any Brunswick ball.


Logged

kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: Ebonite Mission
« Reply #22 on: January 09, 2010, 01:03:53 AM »
quote:
quote:
you cant compare ebonite to big b

big b new balls = good/great

ebonite balls = junk


When was the last good Brunswick ball?  Sure if you want a ball that bails on the backend then I guess Brunswick would be the choice.  Unless you throw it like rash Brunswick balls are mush.

Magic Action is better then any Brunswick ball.




Wow, really??? I've never had any problem getting the Brunswick stuff to turn over on the backend and I'm not Shawn Rash by any means. What was the last Brunswick ball you drilled???

I'm guessing the Mission will be an awesome ball and much needed. A guy I know that is on staff with Ebonite and puts a lot of hand in the ball has really struggled with their stuff lately because it burns up and dies. No matter the pattern, surface, or the amount of polish. I'm sure this ball will be much improved over a lot the grit they have released lately. Plus Ebonite sales in my area has been really low recently and the Hammer stuff is through the roof. It all comes from the same place, so maybe they can pass some back on to the Ebonite brand.
--------------------
" men lie, women lie, numbers don't "
Logged
…… you can't  add a physics term to a bowling term and expect it to mean something.

mainzer

  • Hero Member
  • *****
  • Posts: 4405
Re: Ebonite Mission
« Reply #23 on: January 09, 2010, 06:37:15 PM »
quote:
"Most tested"... Remember the EPX-T1?
--------------------
DizzyFugu - Reporting from Germany

Confused by bowling? Check out BR.com's vault of wisdom: the unofficial FAQ section


EPX was an amazing ball.
--------------------
"His Loyalty couldnt be bought at any price
but it could be rented remarkably cheaply"
-Inquisitor Allendyne-

Founding Father of the BR Inquisition

MainzerPower
Logged
"No one runs...from the conquerer "

MainzerPower

Balldoctor

  • Hero Member
  • *****
  • Posts: 569
Re: Ebonite Mission
« Reply #24 on: January 09, 2010, 08:14:21 PM »
Counting the days. Red ball up !!!!!!!
Will come back from everywhere.
--------------------
Ambassador Of Bowling
Logged

EboStaff10

  • Full Member
  • ***
  • Posts: 107
Re: Ebonite Mission
« Reply #25 on: January 14, 2010, 03:33:33 PM »
I know the Magic Action is an awesome peice and I CAN NOT wait to get my hands on this ball, I am hoping I will get it next week so I can punch them up...Color looks really good and I bet it will look really good polished too.
--------------------
BOWL TO WIN
JenXXX Pro Shop
Logged

DanR

  • Sr. Member
  • ****
  • Posts: 396
Re: Ebonite Mission
« Reply #26 on: January 15, 2010, 09:44:45 AM »
I was advised by a friend who throw the Mission that it's a good ball.  He used it out of box then also with some surface, light 1000 grit.  He like them both.  
These days with the heavier volume of oil, I prefer balls with little surface.  Even with decent amount of surface, after about 10 shots the ball tames down and is very user friendly
Logged

jayemmee

  • Newbie
  • *
  • Posts: 3
Re: Ebonite Mission
« Reply #27 on: January 16, 2010, 12:32:12 PM »
The Ebonite Mission will be available in the UK from 2nd February - see http://www.talktenpin.net/index.php?option=com_content&task=view&id=4360&Itemid=88

Edited on 1/16/2010 1:32 PM
Logged

rickywin

  • Jr. Member
  • **
  • Posts: 98
Re: Ebonite Mission
« Reply #28 on: January 16, 2010, 12:36:59 PM »
Ebonite has posted a video of their Mission. I'm not gonna lie though - Ebonite has probably the worst bowling ball videos on the market.
Logged

dark_rising76

  • Sr. Member
  • ****
  • Posts: 279
Re: Ebonite Mission
« Reply #29 on: January 17, 2010, 12:16:22 PM »
quote:
Ebonite has posted a video of their Mission. I'm not gonna lie though - Ebonite has probably the worst bowling ball videos on the market.


Yes, it could have been done better. But I did like the few clips that Ebonite did show of the Mission on the lane. Looks to be very flippy on the backend. Also, if you have Ebonite as a friend on Facebook, they posted a pic of their ball display with the Mission if you want to see what it looks like.
Logged

BowlerKid

  • Jr. Member
  • **
  • Posts: 85
Re: Ebonite Mission
« Reply #30 on: January 17, 2010, 07:38:32 PM »
The mission is a very solid ball, I bowl collegiate for Webber International and were sponsored by Ebonite so we got two cases of Missions and we had a tournament this weekend with 5 guys throwing the ball. I must say this ball is phenomenal, smooth and continuous through the mid-lane with a good amount of pop on the back end. Two of us used the ball ALL day today on an ugly 40 foot pattern (an old Summit laying down a sport pattern) and never got an over/under reaction just kept chasing it left.
Logged
Pages: 1 [2] 3
« previous next »