Author Topic: Tommy Jones Trick layout (Read 4908 times)

bighook69 · « **on:** February 09, 2010, 12:11:48 PM »

Has anyone used the "Tommy Jones trick layout"? What are your thoughts? It is described as length an lots of backend... also says best for high-rev guys. I am on the "high-rev" spectrum and am going to pick up a Mission next week, and wanted to know if there was any thoughts on the layout... or using it on the Mission?

walterrayseggs · « **Reply #1 on:** February 09, 2010, 08:23:43 PM »

It does what it says it'll do. 45 feet, left turn. It's very speed sensitive, and if you miss it at the bottom, it'll go 60 feet.

bighook69 · « **Reply #2 on:** February 09, 2010, 08:38:15 PM »

speed sensitive might not be what I want... to be honest this will be ebonite's last chance with me, the Mission just looks like a great piece so I figure why not. With the mission being a strong midlane and backend ball the layout does sound appealing, also with it being specific for high rev guys...

Sir Bowl-A-Lot · « **Reply #3 on:** February 09, 2010, 08:41:51 PM »

quote:
to be honest this will be ebonite's last chance with me, the Mission just looks like a great piece so I figure why not.

Last chance here as well. The Mission better be as advertised.

bighook69 · « **Reply #4 on:** February 09, 2010, 08:44:36 PM »

quote:
quote:
to be honest this will be ebonite's last chance with me, the Mission just looks like a great piece so I figure why not.

Last chance here as well. The Mission better be as advertised.

lol, after the Evolve I basically said no more ebonite... but this ball just looks so mean... so one last chance and if this one fails well then someone on here might get a nice 15# Mission single drill soon!!

tuckingfenpin · « **Reply #5 on:** February 09, 2010, 08:46:48 PM »

I'd put your favorite layout instead of something off the wall to get a real feel for how it should react if it's the company's 'last chance' as you put it..if it doesn't do what you think it should will you question the ball or layout?

I'd rather know it was the ball, personally, instead of guessing.
--------------------
Big B > *

bighook69 · « **Reply #6 on:** February 09, 2010, 08:47:54 PM »

quote:
I''d put your favorite layout instead of something off the wall to get a real feel for how it should react if it''s the company''s ''last chance'' as you put it..if it doesn''t do what you think it should will you question the ball or layout?

I''d rather know it was the ball, personally, instead of guessing.
--------------------
Big B > *

I just like the idea of the layout, something that produces high flare but still gets down the lane.

edit: I don''t have a favorite layout, nothing works for me

lol

Edited on 2/9/2010 9:50 PM

Coolerman · « **Reply #7 on:** February 10, 2010, 09:05:31 AM »

The funny part is

f all the equipment TJ can get,he looks for a lot of the blemish balls,and
balls with 5' plus pins.In 2008 during the USBC Queens in Detroit area,he was here working
for Ebonite,helping the women set up equipment.The pro shop my friend owns is Super Bowl
in Canton,MI,the site of the Queens qualifying and match play.When the equipment came in
from Ebonite it was funny to see him scramble for the odd lot balls.But with his game I understand
the need for such odd pins.

dizzyfugu · « **Reply #8 on:** February 10, 2010, 09:12:46 AM »

quote:
I'd put your favorite layout instead of something off the wall to get a real feel for how it should react if it's the company's 'last chance' as you put it..if it doesn't do what you think it should will you question the ball or layout?

I'd rather know it was the ball, personally, instead of guessing.

+1. If it is "last chance" for Ebonite for you, I do not understand why you would put a very (player-)specific layout on the ball? This is IMO destined to crash.
Better use a favorite or more generic layout - otherwise you will IMHO be hardly able to judge (and exploit) the ball's potential.
--------------------
DizzyFugu - Reporting from Germany

Confused by bowling? Check out BR.com's vault of wisdom: the unofficial FAQ section

BOWLAHOLIC300 · « **Reply #9 on:** February 10, 2010, 10:29:39 AM »

I owm a MISSION and would put my favorite drilling on it if I where you. This is a great ball. Don't waste it with a trick drilling. My Mission paid for it self the first night I got it. Pot games. shot Crazy numbers with it all weekend. 249, 278, 279, 279, 260, etc. I have already ordered mission number 2
--------------------
Mr Wham

bighook69 · « **Reply #10 on:** February 10, 2010, 11:32:32 AM »

well my 2 "favorite" layouts would be pin on PAP and pin below bridge... both are usually early rolling, smooth arc layouts... and with the Mission I was hoping to get away from that reaction to mix up my arsenal, was looking for something that will get down the lane and have a very strong midlane and backend... any suggestions?

edit: GREAT bowling by the way bowlaholic

Edited on 2/10/2010 12:33 PM

ralphiejantz · « **Reply #11 on:** February 10, 2010, 04:01:45 PM »

go with a safe type of layout
not something unusual if you want to get a feel for the ball

when Im trying something new and I really want to see what the ball itself will do I simply go with a basic type of over the label drill or a simple stacked drill

completebowler · « **Reply #12 on:** February 10, 2010, 04:24:54 PM »

I have my Mission drilled with 33*-4 3/8-33* dual thumb layout with the hole in the p4 position. While it is very big overall when I get my feet way in (which is often with this ball) it can be very skid/snappy if played deep inside.

So I would recommend drilling it pin down (under ring) to see the most out of the midlane reaction. I am probably gonna do this with one myself eventually and I hate that layout but the ball is so strong on the back I was thinking this will smooth it out.

Also I had the TJ layout on my TNV and I had to dull it cause it was soooo long. I am a tweener but with a pretty good rev rate. I think this layout on the Mission would be hyper sensitive.
--------------------

BOWLAHOLIC300 · « **Reply #13 on:** February 10, 2010, 11:34:26 PM »

I drilled my first mission pin ABOVE FINGERS splitting the bridge and ring finger mass bias spun 45. The houses I've been bowling in the New York City area a generally pretty dry these days so I put a light polish on my Mission. My 2nd mission I will keep in box condition for heavier volumes. The Mission seems to be a very versatile ball for drilling and cover changes. The Mission seems to pretty much do what you want it to do according to how you drill it and prepare the surface. I LOVE THIS BALL....
--------------------
Mr Wham

kidlost2000 · « **Reply #14 on:** February 11, 2010, 12:01:56 AM »

The Ebonite staff guy where I bowl as not been impressed with there stuff as of late.....I mean it hasn't been good for him at all. As soon as he got the Mission things picked back up. It is the only ball I've seen him throw for a while now. So Ebonite may have finally turned it back in the right direction.
--------------------
" men lie, women lie, numbers don't "

Author Topic: Tommy Jones Trick layout (Read 4908 times)

bighook69

Tommy Jones Trick layout

walterrayseggs

Re: Tommy Jones Trick layout

bighook69

Re: Tommy Jones Trick layout

Sir Bowl-A-Lot

Re: Tommy Jones Trick layout

bighook69

Re: Tommy Jones Trick layout

tuckingfenpin

Re: Tommy Jones Trick layout

bighook69

Re: Tommy Jones Trick layout

Coolerman

Re: Tommy Jones Trick layout

dizzyfugu

Re: Tommy Jones Trick layout

BOWLAHOLIC300

Re: Tommy Jones Trick layout

bighook69

Re: Tommy Jones Trick layout

ralphiejantz

Re: Tommy Jones Trick layout

completebowler

Re: Tommy Jones Trick layout

BOWLAHOLIC300

Re: Tommy Jones Trick layout

kidlost2000

Re: Tommy Jones Trick layout